The sbni driver provides support for leased line modems of following models:
• SBNI12-02, SBNI12D-02
• SBNI12-04, SBNI12D-04
• SBNI12-05, SBNI12D-05, ISA and PCI
• SBNI12-10, SBNI12D-10, ISA and PCI
and a kit for data link over a voice band:
• SBNI12-11, SBNI12D-11, ISA and PCI.
In addition to the standard port and IRQ specifications, the sbni driver also supports a number of flags
which can set baud rate, receive level, and low three bytes of Ethernet MAC-address (high three are
always 00:ff:01), because Granch modems are presented to the system as Ethernet-like network cards.
The high byte of the flags is a bit field, it is used to specify SBNI adapter receive level/baud rate:
Bits 0-3: receive level (0x00..0x0f)
Bits 4-5: baud rate number:
00 - 0 baud rate (2Mb in fast mode/500kb in slow)
01 - 1 baud rate (1Mb/250kb)
10 - 2 baud rate (500kb/125kb)
11 - 3 baud rate (250kb/62.5kb)
Bit 6: use fixed receive level
if bit 6 is set then receive level will be set according to bits 0-3 value, otherwise
receive level will be autodetected
Bit 7: use fixed baud rate
if bit 7 is set then baud rate will be set according to bits 4-5 value, otherwise baud
rate is set to 2Mb