trm — Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver

       The trm driver was originally written for FreeBSD 3.0/i386 by Erich Chen of Tekram Technology, and ported
       to FreeBSD 5.0 by Olivier Houchard <cognet@FreeBSD.org>.

Debian                                          December 8, 2002                                          TRM(4)

       This driver is scheduled for removal prior to the release of FreeBSD 13.0

       The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.

       SCSI controllers supported by the trm driver include:

       •   Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI connector
       •   Tekram DC-315U PCI Ultra SCSI adapter without BIOS
       •   Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector
       •   Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
       •   Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
       •   Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS

       For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host adapters, use the sym(4) driver.

       trm — Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver

cd(4), ch(4), da(4), intro(4), sa(4), scsi(4), sym(4)

       http://www.tekram.com/

       To compile this driver into the kernel, place the following lines in your kernel configuration file:

             devicescbusdevicetrm

       Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

             trm_load="YES"