mlx4ib — Mellanox ConnectX-3 10GbE/40GbE network adapter driver

       The mlx4ib driver was written by Mellanox Technologies <freebsd-drivers@mellanox.com>.

Debian                                            March 1, 2017                                        MLX4IB(4)

       Mellanox  ConnectX  adapter cards with Virtual Protocol Interconnect (VPI) provide the highest performing
       and most flexible interconnect solution for Enterprise  Data  Centers,  High-Performance  Computing,  and
       Embedded environments.  Clustered data bases, parallelized applications, transactional services and high-
       performance  embedded  I/O  applications  will  achieve significant performance improvements resulting in
       reduced completion time and lower cost per operation.

       The mlx4ib driver supports the following network adapters:

       •   Mellanox ConnectX-2 (IB)
       •   Mellanox ConnectX-3 (IB)

       The mlx4ib device driver first appeared in FreeBSD 9.x.

       mlx4ib — Mellanox ConnectX-3 10GbE/40GbE network adapter driver

mlx4en(4), ifconfig(8)

       For general information and support, go to the Mellanox support website at: http://www.mellanox.com/.

       If an issue is identified with this driver and a supported network adapter,  please  email  the  specific
       information to ⟨freebsd-drivers@mellanox.com⟩.

       To compile this driver into the kernel, place these lines in your kernel configuration file:

             optionsCOMPAT_LINUXKPIdevicemlx4devicemlx4ib

       To load the driver as a module at run-time, run this command as root:

             kldload mlx4ib

       To load the driver as a module at boot time, place this line in loader.conf(5):

             mlx4ib_load="YES"