vmware - VMware SVGA video driver

       If the driver can connect to the "vmwgfx" kernel module on linux, and the Virtual Machine is  set  up  to
       use 3D acceleration, the driver will try to use Gallium3D XA to accelerate 3D operations. It will also by
       default  enable  DRI,  the  Direct  Rendering  Infrastructure,  primarily  for accelerated OpenGL.  If 3D
       acceleration is available, the driver will in addition provide an additional XVideo adaptor for  textured
       video.  Gallium3D XA, "libxatracker.so" and the accelerated OpenGL driver, "vmwgfx_dri.so" is provided by
       the mesa distribution.

       Copyright (c) 1999-2007 VMware, Inc.

X Version 11                                xf86-video-vmware 13.4.0                                   VMWARE(4)

       Please refer to xorg.conf(5) for general configuration details.  This section only  covers  configuration
       details specific to this driver.

       The driver auto-detects the version of any virtual VMware SVGA adapter.

       The following driver Options are supported:

       Option"HWCursor""boolean"
              Enable or disable the HW cursor.  Default: off.

       Option"Xinerama""boolean"
              Disable or enable Xinerama support. Default: xinerama is enabled if the hardware supports it.

       Option"StaticXinerama""string"
              Provide  a  static  xinerama  geometry  that  will  be  active  at  server startup and will not be
              overridden             at             runtime.              The             format              is
              "Width1xHeight1+Xoffset1+Yoffset1;Width2xHeight2+Xoffset2+Yoffset2"  and  so  on. Negative offsets
              are not supported. If the driver is using RandR12, this option should be used to place and  enable
              outputs  at  driver  startup  time  or  else when VMware tools is not used for that purpose.  Also
              please see option "GuiLayout".

       Option"GuiLayout""string"
              A synonym to option "StaticXinerama", since the latter name is somewhat misleading when RandR12 is
              favoured before Xinerarma.

       Option"AddDefaultMode""boolean"
              Provide a default mode with a resolution identical to the resolution of the  guest  before  the  X
              server was started. The X server will thus try to start without changing resolution. Default: on.

       Option"RenderAccel""boolean"
              Try  to  accelerate  render  operations  if the operations are reading from previously accelerated
              contents (3D or video). This option is needed for 3D support. Default: on if  3D  acceleration  is
              supported. Otherwise off.

       Option"DRI""boolean"
              Enable  the  Direct  Rendering  Infrastructure.  Default:  on  if 3D acceleration is supported and
              "RenderAccel" is enabled. Otherwise off.

       Option"DirectPresents""boolean"
              Speed up OpenGL swapbuffers by skipping a copy operation. This  provides  some  OpenGL  swapbuffer
              speedups, but may cause performance degradation and rendering errors when 3D contents is read back
              for mixing with software rendered contents. Default: off.

       Option"HwPresents""boolean"
              This  is  a  developer  convenience option and should not be used by distros or normal users. When
              enabled, it copies software rendered contents to a 3D surface before presenting it,  so  that  the
              visible screen is always present on a 3D surface. Default: off.

       Option"RenderCheck""boolean"
              This  is  a  developer  convenience option and should not be used by distros or normal users. When
              enabled, it tries to use 3D acceleration for all  XRender  operations  where  3D  acceleration  is
              supported,  resulting  in  a  considerable  slowdown  due  to the increased number of readbacks of
              accelerated contents from host to guest. This option  is  used  to  verify  that  the  accelerated
              Xrender paths works correctly with the "rendercheck" application. Default: off.

       SEEALSOXorg(1), xorg.conf(5), Xserver(1), X(7), xrandr(1)

vmware is an Xorg driver for VMware virtual video cards.

       If  the  driver  can  connect  to  the  "vmwgfx"  kernel  module  on linux, it will attempt to use kernel
       modesetting and will then also use RandR12 for multiple output  operation  instead  of  Xinerama.  The  X
       server  log  or the "xrandr" application can be used to determine whether RandR12 or Xinerama is actually
       used.

       vmware - VMware SVGA video driver

Section"Device"Identifier"devname"Driver"vmware"
         ...
       EndSection