Config::Model::models::LCDd::CwLnx - Configuration class LCDd::CwLnx

       Configuration classes used by Config::Model

       generated from LCDd.conf

Device
       Select the output device to use  Optional.Typeuniline.

       upstream_default value :
           /dev/lcd

   Keypad
       If  you  have  a  keypad  connected.  Keypad  layout is currently not configureable from the config file.
       Optional.Typeuniline.

       default value :
           yes

   Model
       Select the LCD model  Optional.Typeenum.choice:'12232','12832','1602'.

       upstream_default value :
           12232

   Reboot
       Reinitialize the LCD's BIOS normally you shouldn't need this.  Optional.Typeboolean.

       upstream_default value :
           no

   Size
       Select the LCD size. Default depends on model: 12232:  20x4  12832:  21x4  1602:  16x2.   Optional.Typeuniline.

       default value :
           20x4

   Speed
       Set the communication speed  Optional.Typeenum.choice:'9600','19200'.

       upstream_default value :
           19200

   keypad_test_mode
       If  you  have  a non-standard keypad you can associate any keystrings to keys.  There are 6 input keys in
       the CwLnx hardware that generate characters from 'A' to 'F'.

       The following is the built-in default mapping hardcoded in the driver.  You can leave those unchanged  if
       you  have  a  standard  keypad.   You  can change it if you want to report other keystrings or have a non
       standard keypad.  KeyMap_A=Up KeyMap_B=Down KeyMap_C=Left KeyMap_D=Right  KeyMap_E=Enter  KeyMap_F=Escape
       keypad_test_mode permits one to test keypad assignment Default value is no.  Optional.Typeuniline.

       upstream_default value :
           yes

       Config::Model::models::LCDd::CwLnx - Configuration class LCDd::CwLnx

       •   cme

perl v5.40.1                                       2025-03-04             Config::Model::...ls::LCDd::CwLnx(3pm)