Config::Model::models::LCDd::imonlcd - Configuration class LCDd::imonlcd

       Configuration classes used by Config::Model

       generated from LCDd.conf

Backlight
       Set the backlight state  Optional.Typeboolean.

       upstream_default value :
           on

   Contrast
       Select the displays contrast  Optional.Typeinteger.

       upstream_default value :
           200

   Device
       Select the output device to use  Optional.Typeuniline.

       upstream_default value :
           /dev/lcd0

       Note: Device is computed with '"my $l = '/dev/lcd-imon'; -e $l ? $l : '/dev/lcd0';"' and with:

       •

   DiscMode
       Set  the  disc  mode  0  =>  spin  the  "slim"  disc - two disc segments, 1 => their complement spinning;
       Optional.Typeenum.choice:'0','1'.

       upstream_default value :
           0

   OnExit
       Set the exit behavior 0 means leave shutdown message, 1 means show the big clock, 2 means  blank  device.
       Optional.Typeinteger.

       upstream_default value :
           1

   Protocol
       Specify which iMon protocol should be used

       Choose 0 for 15c2:ffdc device, Choose 1 for 15c2:0038 device.  Optional.Typeenum.choice:'0','1'.

       upstream_default value :
           0

       Note: Protocol is computed with '" `lsusb -d 15c2:` =~ /:0038/ ;"' and with:

       •

   Size
       Specify the size of the display in pixels  Optional.Typeuniline.

       upstream_default value :
           96x16

       Config::Model::models::LCDd::imonlcd - Configuration class LCDd::imonlcd

       •   cme

perl v5.40.1                                       2025-03-04             Config::Model::...::LCDd::imonlcd(3pm)