Config::Model::models::LCDd::NoritakeVFD - Configuration class LCDd::NoritakeVFD

       Configuration classes used by Config::Model

       generated from LCDd.conf

Brightness
       Set the initial brightness  Optional.Typeinteger.

       upstream_default value :
           1000

   Device
       device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1.  Optional.Typeuniline.

       upstream_default value :
           /dev/lcd

   OffBrightness
       Set  the initial off-brightness This value is used when the display is normally switched off in case LCDd
       is inactive.  Optional.Typeinteger.

       upstream_default value :
           0

   Parity
       Set serial data parity Meaning: 0(=none), 1(=odd), 2(=even)  Optional.Typeinteger.

       upstream_default value :
           0

   Reboot
       re-initialize the VFD  Optional.Typeboolean.

       upstream_default value :
           no

   Size
       Specifies the size of the LCD.  Optional.Typeuniline.

       default value :
           20x4

   Speed
       set the serial port speed  Optional.Typeuniline.

       upstream_default value :
           9600,legal:1200,2400,9600,19200,115200

       Config::Model::models::LCDd::NoritakeVFD - Configuration class LCDd::NoritakeVFD

       •   cme

perl v5.40.1                                       2025-03-04             Config::Model::...Dd::NoritakeVFD(3pm)