Config::Model::models::LCDd::sed1520 - Configuration class LCDd::sed1520

       Configuration classes used by Config::Model

       generated from LCDd.conf

DelayMult
       On fast machines it may be necessary to slow down transfer to the display.  If this value is set to zero,
       delay is disabled. Any value greater than zero slows down each write by one microsecond.  Optional.Typeinteger.

       upstream_default value :
           1

   HaveInverter
       The  original  wiring  used  an  inverter  to  drive the control lines. If you do not use an inverter set
       haveInverter to no.  Optional.Typeboolean.

       upstream_default value :
           yes

   InterfaceType
       Select the interface type (wiring) for the display. Supported  values  are  68  for  68-style  connection
       (RESET  level high) and 80 for 80-style connection (RESET level low).  Optional.Typeenum.choice:'68','80'.

       upstream_default value :
           80

   InvertedMapping
       On some displays column data in memory is mapped to segment lines from right  to  left.  This  is  called
       inverted mapping (not to be confused with 'haveInverter' from above).  Optional.Typeboolean.

       upstream_default value :
           no

   Port
       Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC.  Optional.Typeuniline.

       default value :
           0x378

   UseHardReset
       At  least  one  display is reported (Everbouquet MG1203D) that requires sending three times 0xFF before a
       reset during initialization.  Optional.Typeboolean.

       upstream_default value :
           no

       Config::Model::models::LCDd::sed1520 - Configuration class LCDd::sed1520

       •   cme

perl v5.40.1                                       2025-03-04             Config::Model::...::LCDd::sed1520(3pm)