Module Format
: (moduleStdlib__Format)Introduction
You may consider this module as providing an extension to the printf facility to provide automatic line
splitting. The addition of pretty-printing annotations to your regular printf format strings gives you
fancy indentation and line breaks. Pretty-printing annotations are described below in the documentation
of the function Format.fprintf .
You may also use the explicit pretty-printing box management and printing functions provided by this
module. This style is more basic but more verbose than the concise fprintf format strings.
For instance, the sequence open_box0;print_string"x=";print_space();print_int1;close_box();print_newline() that prints x=1 within a pretty-printing box, can be
abbreviated as printf"@[%s@%i@]@.""x="1 , or even shorter printf"@[x=@%i@]@."1 .
Rule of thumb for casual users of this library:
-use simple pretty-printing boxes (as obtained by open_box0 );
-use simple break hints as obtained by print_cut() that outputs a simple break hint, or by print_space() that outputs a space indicating a break hint;
-once a pretty-printing box is open, display its material with basic printing functions (e. g. print_int
and print_string );
-when the material for a pretty-printing box has been printed, call close_box() to close the box;
-at the end of pretty-printing, flush the pretty-printer to display all the remaining material, e.g.
evaluate print_newline() .
The behavior of pretty-printing commands is unspecified if there is no open pretty-printing box. Each box
opened by one of the open_ functions below must be closed using close_box for proper formatting.
Otherwise, some of the material printed in the boxes may not be output, or may be formatted incorrectly.
In case of interactive use, each phrase is executed in the initial state of the standard pretty-printer:
after each phrase execution, the interactive system closes all open pretty-printing boxes, flushes all
pending text, and resets the standard pretty-printer.
Warning: mixing calls to pretty-printing functions of this module with calls to Stdlib low level output
functions is error prone.
The pretty-printing functions output material that is delayed in the pretty-printer queue and stacks in
order to compute proper line splitting. In contrast, basic I/O output functions write directly in their
output device. As a consequence, the output of a basic I/O function may appear before the output of a
pretty-printing function that has been called before. For instance,
Stdlib.print_string"<";Format.print_string"PRETTY";Stdlib.print_string">";Format.print_string"TEXT";
leads to output <>PRETTYTEXT .
Formatterstypeformatter
Abstract data corresponding to a pretty-printer (also called a formatter) and all its machinery. See also
Format.formatter .
Pretty-printingboxes
The pretty-printing engine uses the concepts of pretty-printing box and break hint to drive indentation
and line splitting behavior of the pretty-printer.
Each different pretty-printing box kind introduces a specific line splitting policy:
-within an horizontal box, break hints never split the line (but the line may be split in a box nested
deeper),
-within a vertical box, break hints always split the line,
-within an horizontal/vertical box, if the box fits on the current line then break hints never split the
line, otherwise break hint always split the line,
-within a compacting box, a break hint never splits the line, unless there is no more room on the current
line.
Note that line splitting policy is box specific: the policy of a box does not rule the policy of inner
boxes. For instance, if a vertical box is nested in an horizontal box, all break hints within the
vertical box will split the line.
Moreover, opening a box after the Format.maxindent splits the line whether or not the box would end up
fitting on the line.
valpp_open_box : formatter->int->unitvalopen_box : int->unitpp_open_boxppfd opens a new compacting pretty-printing box with offset d in the formatter ppf .
Within this box, the pretty-printer prints as much as possible material on every line.
A break hint splits the line if there is no more room on the line to print the remainder of the box.
Within this box, the pretty-printer emphasizes the box structure: if a structural box does not fit fully
on a simple line, a break hint also splits the line if the splitting ``moves to the left'' (i.e. the new
line gets an indentation smaller than the one of the current line).
This box is the general purpose pretty-printing box.
If the pretty-printer splits the line in the box, offset d is added to the current indentation.
valpp_close_box : formatter->unit->unitvalclose_box : unit->unit
Closes the most recently open pretty-printing box.
valpp_open_hbox : formatter->unit->unitvalopen_hbox : unit->unitpp_open_hboxppf() opens a new 'horizontal' pretty-printing box.
This box prints material on a single line.
Break hints in a horizontal box never split the line. (Line splitting may still occur inside boxes
nested deeper).
valpp_open_vbox : formatter->int->unitvalopen_vbox : int->unitpp_open_vboxppfd opens a new 'vertical' pretty-printing box with offset d .
This box prints material on as many lines as break hints in the box.
Every break hint in a vertical box splits the line.
If the pretty-printer splits the line in the box, d is added to the current indentation.
valpp_open_hvbox : formatter->int->unitvalopen_hvbox : int->unitpp_open_hvboxppfd opens a new 'horizontal/vertical' pretty-printing box with offset d .
This box behaves as an horizontal box if it fits on a single line, otherwise it behaves as a vertical
box.
If the pretty-printer splits the line in the box, d is added to the current indentation.
valpp_open_hovbox : formatter->int->unitvalopen_hovbox : int->unitpp_open_hovboxppfd opens a new 'horizontal-or-vertical' pretty-printing box with offset d .
This box prints material as much as possible on every line.
A break hint splits the line if there is no more room on the line to print the remainder of the box.
If the pretty-printer splits the line in the box, d is added to the current indentation.
Formattingfunctionsvalpp_print_string : formatter->string->unitvalprint_string : string->unitpp_print_stringppfs prints s in the current pretty-printing box.
valpp_print_substring : pos:int->len:int->formatter->string->unitvalprint_substring : pos:int->len:int->string->unitpp_print_substring~pos~lenppfs prints the substring of s that starts at position pos and stops at
position pos+len in the current pretty-printing box.
Since 5.3
valpp_print_bytes : formatter->bytes->unitvalprint_bytes : bytes->unitpp_print_bytesppfb prints b in the current pretty-printing box.
Since 4.13
valpp_print_as : formatter->int->string->unitvalprint_as : int->string->unitpp_print_asppflens prints s in the current pretty-printing box. The pretty-printer formats s as if it
were of length len .
valpp_print_substring_as : pos:int->len:int->formatter->int->string->unitvalprint_substring_as : pos:int->len:int->int->string->unitpp_print_substring_as~first~lenppflen_ass prints the substring of s that starts at position pos and
stop at position pos+len in the current pretty-printing box as if it were of length len_as .
Since 5.1
valpp_print_int : formatter->int->unitvalprint_int : int->unit
Print an integer in the current pretty-printing box.
valpp_print_float : formatter->float->unitvalprint_float : float->unit
Print a floating point number in the current pretty-printing box.
valpp_print_char : formatter->char->unitvalprint_char : char->unit
Print a character in the current pretty-printing box.
valpp_print_bool : formatter->bool->unitvalprint_bool : bool->unit
Print a boolean in the current pretty-printing box.
valpp_print_nothing : formatter->unit->unit
Print nothing.
Since 5.2
Breakhints
A 'break hint' tells the pretty-printer to output some space or split the line whichever way is more
appropriate to the current pretty-printing box splitting rules.
Break hints are used to separate printing items and are mandatory to let the pretty-printer correctly
split lines and indent items.
Simple break hints are:
-the 'space': output a space or split the line if appropriate,
-the 'cut': split the line if appropriate.
Note: the notions of space and line splitting are abstract for the pretty-printing engine, since those
notions can be completely redefined by the programmer. However, in the pretty-printer default setting,
``output a space'' simply means printing a space character (ASCII code 32) and ``split the line'' means
printing a newline character (ASCII code 10).
valpp_print_space : formatter->unit->unitvalprint_space : unit->unitpp_print_spaceppf() emits a 'space' break hint: the pretty-printer may split the line at this point,
otherwise it prints one space.
pp_print_spaceppf() is equivalent to pp_print_breakppf10 .
valpp_print_cut : formatter->unit->unitvalprint_cut : unit->unitpp_print_cutppf() emits a 'cut' break hint: the pretty-printer may split the line at this point,
otherwise it prints nothing.
pp_print_cutppf() is equivalent to pp_print_breakppf00 .
valpp_print_break : formatter->int->int->unitvalprint_break : int->int->unitpp_print_breakppfnspacesoffset emits a 'full' break hint: the pretty-printer may split the line at
this point, otherwise it prints nspaces spaces.
If the pretty-printer splits the line, offset is added to the current indentation.
valpp_print_custom_break : formatter->fits:string*int*string->breaks:string*int*string->unitpp_print_custom_breakppf~fits:(s1,n,s2)~breaks:(s3,m,s4) emits a custom break hint: the
pretty-printer may split the line at this point.
If it does not split the line, then the s1 is emitted, then n spaces, then s2 .
If it splits the line, then it emits the s3 string, then an indent (according to the box rules), then an
offset of m spaces, then the s4 string.
While n and m are handled by formatter_out_functions.out_indent , the strings will be handled by
formatter_out_functions.out_string . This allows for a custom formatter that handles indentation
distinctly, for example, outputs <br/> tags or entities.
The custom break is useful if you want to change which visible (non-whitespace) characters are printed in
case of break or no break. For example, when printing a list [a;b;c] , you might want to add a trailing
semicolon when it is printed vertically:
[a;b;c;]
You can do this as follows:
printf"@[<v0>[@;<02>@[<v0>a;@,b;@,c@]%t]@]@\n"(pp_print_custom_break~fits:("",0,"")~breaks:(";",0,""))Since 4.08
valpp_force_newline : formatter->unit->unitvalforce_newline : unit->unit
Force a new line in the current pretty-printing box.
The pretty-printer must split the line at this point,
Not the normal way of pretty-printing, since imperative line splitting may interfere with current line
counters and box size calculation. Using break hints within an enclosing vertical box is a better
alternative.
valpp_print_if_newline : formatter->unit->unitvalprint_if_newline : unit->unit
Execute the next formatting command if the preceding line has just been split. Otherwise, ignore the next
formatting command.
Pretty-printingterminationvalpp_print_flush : formatter->unit->unitvalprint_flush : unit->unit
End of pretty-printing: resets the pretty-printer to initial state.
All open pretty-printing boxes are closed, all pending text is printed. In addition, the pretty-printer
low level output device is flushed to ensure that all pending text is really displayed.
Note: never use print_flush in the normal course of a pretty-printing routine, since the pretty-printer
uses a complex buffering machinery to properly indent the output; manually flushing those buffers at
random would conflict with the pretty-printer strategy and result to poor rendering.
Only consider using print_flush when displaying all pending material is mandatory (for instance in case
of interactive use when you want the user to read some text) and when resetting the pretty-printer state
will not disturb further pretty-printing.
Warning: If the output device of the pretty-printer is an output channel, repeated calls to print_flush
means repeated calls to flush to flush the out channel; these explicit flush calls could foil the
buffering strategy of output channels and could dramatically impact efficiency.
valpp_print_newline : formatter->unit->unitvalprint_newline : unit->unit
End of pretty-printing: resets the pretty-printer to initial state.
All open pretty-printing boxes are closed, all pending text is printed.
Equivalent to Format.print_flush with a new line emitted on the pretty-printer low-level output device
immediately before the device is flushed. See corresponding words of caution for Format.print_flush .
Note: this is not the normal way to output a new line; the preferred method is using break hints within a
vertical pretty-printing box.
Marginvalpp_infinity : intpp_infinity is the maximal size of the margin. Its exact value is implementation dependent but is
guaranteed to be greater than 10^9.
Since 5.2
valpp_set_margin : formatter->int->unitvalset_margin : int->unitpp_set_marginppfd sets the right margin to d (in characters): the pretty-printer splits lines that
overflow the right margin according to the break hints given. Setting the margin to d means that the
formatting engine aims at printing at most d-1 characters per line. Nothing happens if d is smaller than
2. If d>=Format.pp_infinity , the right margin is set to Format.pp_infinity-1 . If d is less than
the current maximum indentation limit, the maximum indentation limit is decreased while trying to
preserve a minimal ratio max_indent/margin>=50% and if possible the current difference margin-max_indent .
See also Format.pp_set_geometry .
valpp_get_margin : formatter->unit->intvalget_margin : unit->int
Returns the position of the right margin.
Maximumindentationlimitvalpp_set_max_indent : formatter->int->unitvalset_max_indent : int->unitpp_set_max_indentppfd sets the maximum indentation limit of lines to d (in characters): once this limit
is reached, new pretty-printing boxes are rejected to the left, unless the enclosing box fully fits on
the current line. As an illustration,
set_margin10;set_max_indent5;printf"@[123456@[7@]89A@]@."
yields
123456789A
because the nested box "@[7@]" is opened after the maximum indentation limit ( 7>5 ) and its parent box
does not fit on the current line. Either decreasing the length of the parent box to make it fit on a
line:
printf"@[123456@[7@]89@]@."
or opening an intermediary box before the maximum indentation limit which fits on the current line
printf"@[123@[456@[7@]89@]A@]@."
avoids the rejection to the left of the inner boxes and print respectively "123456789" and "123456789A" .
Note also that vertical boxes never fit on a line whereas horizontal boxes always fully fit on the
current line. Opening a box may split a line whereas the contents may have fit. If this behavior is
problematic, it can be curtailed by setting the maximum indentation limit to margin-1 . Note that
setting the maximum indentation limit to margin is invalid.
Nothing happens if d is smaller than 2.
If d is greater than the current margin, it is ignored, and the current maximum indentation limit is
kept.
See also Format.pp_set_geometry .
valpp_get_max_indent : formatter->unit->intvalget_max_indent : unit->int
Return the maximum indentation limit (in characters).
Geometry
Geometric functions can be used to manipulate simultaneously the coupled variables, margin and maximum
indentation limit.
typegeometry = {
max_indent : int ;
margin : int ;
}
Since 4.08
valcheck_geometry : geometry->bool
Check if the formatter geometry is valid: 1<max_indent<margin<Format.pp_infinitySince 4.08
valpp_set_geometry : formatter->max_indent:int->margin:int->unitvalset_geometry : max_indent:int->margin:int->unitvalpp_safe_set_geometry : formatter->max_indent:int->margin:int->unitvalsafe_set_geometry : max_indent:int->margin:int->unitpp_set_geometryppf~max_indent~margin sets both the margin and maximum indentation limit for ppf .
When 1<max_indent<margin<Format.pp_infinity , pp_set_geometryppf~max_indent~margin is equivalent
to pp_set_marginppfmargin;pp_set_max_indentppfmax_indent ; and avoids the subtly incorrect
pp_set_max_indentppfmax_indent;pp_set_marginppfmargin ;
Outside of this domain, pp_set_geometry raises an invalid argument exception whereas pp_safe_set_geometry
does nothing.
Since 4.08
valpp_update_geometry : formatter->(geometry->geometry)->unitpp_update_geometryppf(fungeo->{geowith...}) lets you update a formatter's geometry in a way that
is robust to extension of the geometry record with new fields.
Raises an invalid argument exception if the returned geometry does not satisfy Format.check_geometry .
Since 4.11
valupdate_geometry : (geometry->geometry)->unitvalpp_get_geometry : formatter->unit->geometryvalget_geometry : unit->geometry
Return the current geometry of the formatter
Since 4.08
Maximumformattingdepth
The maximum formatting depth is the maximum number of pretty-printing boxes simultaneously open.
Material inside boxes nested deeper is printed as an ellipsis (more precisely as the text returned by
Format.get_ellipsis_text() ).
valpp_set_max_boxes : formatter->int->unitvalset_max_boxes : int->unitpp_set_max_boxesppfmax sets the maximum number of pretty-printing boxes simultaneously open.
Material inside boxes nested deeper is printed as an ellipsis (more precisely as the text returned by
Format.get_ellipsis_text() ).
Nothing happens if max is smaller than 2.
valpp_get_max_boxes : formatter->unit->intvalget_max_boxes : unit->int
Returns the maximum number of pretty-printing boxes allowed before ellipsis.
valpp_over_max_boxes : formatter->unit->boolvalover_max_boxes : unit->bool
Tests if the maximum number of pretty-printing boxes allowed have already been opened.
Tabulationboxes
A tabulation box prints material on lines divided into cells of fixed length. A tabulation box provides a
simple way to display vertical columns of left adjusted text.
This box features command set_tab to define cell boundaries, and command print_tab to move from cell to
cell and split the line when there is no more cells to print on the line.
Note: printing within tabulation box is line directed, so arbitrary line splitting inside a tabulation
box leads to poor rendering. Yet, controlled use of tabulation boxes allows simple printing of columns
within module Format .
valpp_open_tbox : formatter->unit->unitvalopen_tbox : unit->unitopen_tbox() opens a new tabulation box.
This box prints lines separated into cells of fixed width.
Inside a tabulation box, special tabulation markers defines points of interest on the line (for instance
to delimit cell boundaries). Function Format.set_tab sets a tabulation marker at insertion point.
A tabulation box features specific tabulation breaks to move to next tabulation marker or split the line.
Function Format.print_tbreak prints a tabulation break.
valpp_close_tbox : formatter->unit->unitvalclose_tbox : unit->unit
Closes the most recently opened tabulation box.
valpp_set_tab : formatter->unit->unitvalset_tab : unit->unit
Sets a tabulation marker at current insertion point.
valpp_print_tab : formatter->unit->unitvalprint_tab : unit->unitprint_tab() emits a 'next' tabulation break hint: if not already set on a tabulation marker, the
insertion point moves to the first tabulation marker on the right, or the pretty-printer splits the line
and insertion point moves to the leftmost tabulation marker.
It is equivalent to print_tbreak00 .
valpp_print_tbreak : formatter->int->int->unitvalprint_tbreak : int->int->unitprint_tbreaknspacesoffset emits a 'full' tabulation break hint.
If not already set on a tabulation marker, the insertion point moves to the first tabulation marker on
the right and the pretty-printer prints nspaces spaces.
If there is no next tabulation marker on the right, the pretty-printer splits the line at this point,
then insertion point moves to the leftmost tabulation marker of the box.
If the pretty-printer splits the line, offset is added to the current indentation.
Ellipsisvalpp_set_ellipsis_text : formatter->string->unitvalset_ellipsis_text : string->unit
Set the text of the ellipsis printed when too many pretty-printing boxes are open (a single dot, . , by
default).
valpp_get_ellipsis_text : formatter->unit->stringvalget_ellipsis_text : unit->string
Return the text of the ellipsis.
Semantictagstypestag = ..
Semantic tags (or simply tags) are user's defined annotations to associate user's specific operations to
printed entities.
Common usage of semantic tags is text decoration to get specific font or text size rendering for a
display device, or marking delimitation of entities (e.g. HTML or TeX elements or terminal escape
sequences). More sophisticated usage of semantic tags could handle dynamic modification of the
pretty-printer behavior to properly print the material within some specific tags. For instance, we can
define an RGB tag like so:
typestag+=RGBof{r:int;g:int;b:int}
In order to properly delimit printed entities, a semantic tag must be opened before and closed after the
entity. Semantic tags must be properly nested like parentheses using Format.pp_open_stag and
Format.pp_close_stag .
Tag specific operations occur any time a tag is opened or closed, At each occurrence, two kinds of
operations are performed tag-marking and tag-printing:
-The tag-marking operation is the simpler tag specific operation: it simply writes a tag specific string
into the output device of the formatter. Tag-marking does not interfere with line-splitting computation.
-The tag-printing operation is the more involved tag specific operation: it can print arbitrary material
to the formatter. Tag-printing is tightly linked to the current pretty-printer operations.
Roughly speaking, tag-marking is commonly used to get a better rendering of texts in the rendering
device, while tag-printing allows fine tuning of printing routines to print the same entity differently
according to the semantic tags (i.e. print additional material or even omit parts of the output).
More precisely: when a semantic tag is opened or closed then both and successive 'tag-printing' and
'tag-marking' operations occur:
-Tag-printing a semantic tag means calling the formatter specific function print_open_stag (resp.
print_close_stag ) with the name of the tag as argument: that tag-printing function can then print any
regular material to the formatter (so that this material is enqueued as usual in the formatter queue for
further line splitting computation).
-Tag-marking a semantic tag means calling the formatter specific function mark_open_stag (resp.
mark_close_stag ) with the name of the tag as argument: that tag-marking function can then return the
'tag-opening marker' (resp. `tag-closing marker') for direct output into the output device of the
formatter.
Being written directly into the output device of the formatter, semantic tag marker strings are not
considered as part of the printing material that drives line splitting (in other words, the length of the
strings corresponding to tag markers is considered as zero for line splitting).
Thus, semantic tag handling is in some sense transparent to pretty-printing and does not interfere with
usual indentation. Hence, a single pretty-printing routine can output both simple 'verbatim' material or
richer decorated output depending on the treatment of tags. By default, tags are not active, hence the
output is not decorated with tag information. Once set_tags is set to true , the pretty-printer engine
honors tags and decorates the output accordingly.
Default tag-marking functions behave the HTML way: Format.tag are enclosed in "<" and ">" while other
tags are ignored; hence, opening marker for tag string "t" is "<t>" and closing marker is "</t>" .
Default tag-printing functions just do nothing.
Tag-marking and tag-printing functions are user definable and can be set by calling
Format.set_formatter_stag_functions .
Semantic tag operations may be set on or off with Format.set_tags . Tag-marking operations may be set on
or off with Format.set_mark_tags . Tag-printing operations may be set on or off with
Format.set_print_tags .
Since 4.08
typetag = stringtypeFormat.stag +=
| String_tag oftag (* String_tags is a string tag s . String tags can be inserted either by
explicitly using the constructor String_tag or by using the dedicated format syntax "@{<s>...@}" .
Since 4.08
*)
valpp_open_stag : formatter->stag->unitvalopen_stag : stag->unitpp_open_stagppft opens the semantic tag named t .
The print_open_stag tag-printing function of the formatter is called with t as argument; then the opening
tag marker for t , as given by mark_open_stagt , is written into the output device of the formatter.
Since 4.08
valpp_close_stag : formatter->unit->unitvalclose_stag : unit->unitpp_close_stagppf() closes the most recently opened semantic tag t .
The closing tag marker, as given by mark_close_stagt , is written into the output device of the
formatter; then the print_close_stag tag-printing function of the formatter is called with t as argument.
Since 4.08
valpp_set_tags : formatter->bool->unitvalset_tags : bool->unitpp_set_tagsppfb turns on or off the treatment of semantic tags (default is off).
valpp_set_print_tags : formatter->bool->unitvalset_print_tags : bool->unitpp_set_print_tagsppfb turns on or off the tag-printing operations.
valpp_set_mark_tags : formatter->bool->unitvalset_mark_tags : bool->unitpp_set_mark_tagsppfb turns on or off the tag-marking operations.
valpp_get_print_tags : formatter->unit->boolvalget_print_tags : unit->bool
Return the current status of tag-printing operations.
valpp_get_mark_tags : formatter->unit->boolvalget_mark_tags : unit->bool
Return the current status of tag-marking operations.
valpp_set_formatter_out_channel : formatter->out_channel->unitRedirectingthestandardformatteroutputvalset_formatter_out_channel : out_channel->unit
Redirect the standard pretty-printer output to the given channel. (All the output functions of the
standard formatter are set to the default output functions printing to the given channel.)
set_formatter_out_channel is equivalent to Format.pp_set_formatter_out_channelstd_formatter .
valpp_set_formatter_output_functions : formatter->(string->int->int->unit)->(unit->unit)->unitvalset_formatter_output_functions : (string->int->int->unit)->(unit->unit)->unitpp_set_formatter_output_functionsppfoutflush redirects the standard pretty-printer output functions to
the functions out and flush .
The out function performs all the pretty-printer string output. It is called with a string s , a start
position p , and a number of characters n ; it is supposed to output characters p to p+n-1 of s .
The flush function is called whenever the pretty-printer is flushed (via conversion %! , or
pretty-printing indications @? or @. , or using low level functions print_flush or print_newline ).
valpp_get_formatter_output_functions : formatter->unit->(string->int->int->unit)*(unit->unit)valget_formatter_output_functions : unit->(string->int->int->unit)*(unit->unit)
Return the current output functions of the standard pretty-printer.
Redefiningformatteroutput
The Format module is versatile enough to let you completely redefine the meaning of pretty-printing
output: you may provide your own functions to define how to handle indentation, line splitting, and even
printing of all the characters that have to be printed!
Redefiningoutputfunctionstypeformatter_out_functions = {
out_string : string->int->int->unit ;
out_flush : unit->unit ;
out_newline : unit->unit ;
out_spaces : int->unit ;
out_indent : int->unit ; (* .B "Since" 4.06
*)
}
The set of output functions specific to a formatter:
-the out_string function performs all the pretty-printer string output. It is called with a string s , a
start position p , and a number of characters n ; it is supposed to output characters p to p+n-1 of s
.
-the out_flush function flushes the pretty-printer output device.
- out_newline is called to open a new line when the pretty-printer splits the line.
-the out_spaces function outputs spaces when a break hint leads to spaces instead of a line split. It is
called with the number of spaces to output.
-the out_indent function performs new line indentation when the pretty-printer splits the line. It is
called with the indentation value of the new line.
By default:
-fields out_string and out_flush are output device specific; (e.g. output_string and flush for a
out_channel device, or Buffer.add_substring and ignore for a Buffer.t output device),
-field out_newline is equivalent to out_string"\n"01 ;
-fields out_spaces and out_indent are equivalent to out_string(String.maken'')0n .
Since 4.01
valpp_set_formatter_out_functions : formatter->formatter_out_functions->unitvalset_formatter_out_functions : formatter_out_functions->unitpp_set_formatter_out_functionsppfout_funs Set all the pretty-printer output functions of ppf to those
of argument out_funs ,
This way, you can change the meaning of indentation (which can be something else than just printing space
characters) and the meaning of new lines opening (which can be connected to any other action needed by
the application at hand).
Reasonable defaults for functions out_spaces and out_newline are respectively out_funs.out_string(String.maken'')0n and out_funs.out_string"\n"01 .
Since 4.01
valpp_get_formatter_out_functions : formatter->unit->formatter_out_functionsvalget_formatter_out_functions : unit->formatter_out_functions
Return the current output functions of the pretty-printer, including line splitting and indentation
functions. Useful to record the current setting and restore it afterwards.
Since 4.01
Redefiningsemantictagoperationstypeformatter_stag_functions = {
mark_open_stag : stag->string ;
mark_close_stag : stag->string ;
print_open_stag : stag->unit ;
print_close_stag : stag->unit ;
}
The semantic tag handling functions specific to a formatter: mark versions are the 'tag-marking'
functions that associate a string marker to a tag in order for the pretty-printing engine to write those
markers as 0 length tokens in the output device of the formatter. print versions are the 'tag-printing'
functions that can perform regular printing when a tag is closed or opened.
Since 4.08
valpp_set_formatter_stag_functions : formatter->formatter_stag_functions->unitvalset_formatter_stag_functions : formatter_stag_functions->unitpp_set_formatter_stag_functionsppftag_funs changes the meaning of opening and closing semantic tag
operations to use the functions in tag_funs when printing on ppf .
When opening a semantic tag with name t , the string t is passed to the opening tag-marking function (the
mark_open_stag field of the record tag_funs ), that must return the opening tag marker for that name.
When the next call to close_stag() happens, the semantic tag name t is sent back to the closing
tag-marking function (the mark_close_stag field of record tag_funs ), that must return a closing tag
marker for that name.
The print_ field of the record contains the tag-printing functions that are called at tag opening and tag
closing time, to output regular material in the pretty-printer queue.
Since 4.08
valpp_get_formatter_stag_functions : formatter->unit->formatter_stag_functionsvalget_formatter_stag_functions : unit->formatter_stag_functions
Return the current semantic tag operation functions of the standard pretty-printer.
Since 4.08
Definingformatters
Defining new formatters permits unrelated output of material in parallel on several output devices. All
the parameters of a formatter are local to the formatter: right margin, maximum indentation limit,
maximum number of pretty-printing boxes simultaneously open, ellipsis, and so on, are specific to each
formatter and may be fixed independently.
For instance, given a Buffer.t buffer b , Format.formatter_of_bufferb returns a new formatter using
buffer b as its output device. Similarly, given a out_channel output channel oc ,
Format.formatter_of_out_channeloc returns a new formatter using channel oc as its output device.
Alternatively, given out_funs , a complete set of output functions for a formatter, then
Format.formatter_of_out_functionsout_funs computes a new formatter using those functions for output.
valformatter_of_out_channel : out_channel->formatterformatter_of_out_channeloc returns a new formatter writing to the corresponding output channel oc .
valsynchronized_formatter_of_out_channel : out_channel->formatterDomain.DLS.keysynchronized_formatter_of_out_channeloc returns the key to the domain-local state that holds the
domain-local formatter for writing to the corresponding output channel oc .
When the formatter is used with multiple domains, the output from the domains will be interleaved with
each other at points where the formatter is flushed, such as with Format.print_flush .
Alertunstable.valstd_formatter : formatter
The initial domain's standard formatter to write to standard output.
It is defined as Format.formatter_of_out_channelstdout .
valget_std_formatter : unit->formatterget_std_formatter() returns the current domain's standard formatter used to write to standard output.
Since 5.0
valerr_formatter : formatter
The initial domain's formatter to write to standard error.
It is defined as Format.formatter_of_out_channelstderr .
valget_err_formatter : unit->formatterget_err_formatter() returns the current domain's formatter used to write to standard error.
Since 5.0
valformatter_of_buffer : Buffer.t->formatterformatter_of_bufferb returns a new formatter writing to buffer b . At the end of pretty-printing, the
formatter must be flushed using Format.pp_print_flush or Format.pp_print_newline , to print all the
pending material into the buffer.
valstdbuf : Buffer.t
The initial domain's string buffer in which str_formatter writes.
valget_stdbuf : unit->Buffer.tget_stdbuf() returns the current domain's string buffer in which the current domain's string formatter
writes.
Since 5.0
valstr_formatter : formatter
The initial domain's formatter to output to the Format.stdbuf string buffer.
str_formatter is defined as Format.formatter_of_bufferFormat.stdbuf .
valget_str_formatter : unit->formatter
The current domain's formatter to output to the current domains string buffer.
Since 5.0
valflush_str_formatter : unit->string
Returns the material printed with str_formatter of the current domain, flushes the formatter and resets
the corresponding buffer.
valmake_formatter : (string->int->int->unit)->(unit->unit)->formattermake_formatteroutflush returns a new formatter that outputs with function out , and flushes with
function flush .
For instance,
make_formatter(Stdlib.output_substringoc)(fun()->Stdlib.flushoc)
returns a formatter to the out_channeloc .
valmake_synchronized_formatter : (string->int->int->unit)->(unit->unit)->formatterDomain.DLS.keymake_synchronized_formatteroutflush returns the key to the domain-local state that holds the
domain-local formatter that outputs with function out , and flushes with function flush .
When the formatter is used with multiple domains, the output from the domains will be interleaved with
each other at points where the formatter is flushed, such as with Format.print_flush .
Since 5.0
Alertunstable.valformatter_of_out_functions : formatter_out_functions->formatterformatter_of_out_functionsout_funs returns a new formatter that writes with the set of output functions
out_funs .
See definition of type Format.formatter_out_functions for the meaning of argument out_funs .
Since 4.06
Symbolicpretty-printing
Symbolic pretty-printing is pretty-printing using a symbolic formatter, i.e. a formatter that outputs
symbolic pretty-printing items.
When using a symbolic formatter, all regular pretty-printing activities occur but output material is
symbolic and stored in a buffer of output items. At the end of pretty-printing, flushing the output
buffer allows post-processing of symbolic output before performing low level output operations.
In practice, first define a symbolic output buffer b using:
- letsob=make_symbolic_output_buffer() . Then define a symbolic formatter with:
- letppf=formatter_of_symbolic_output_buffersob
Use symbolic formatter ppf as usual, and retrieve symbolic items at end of pretty-printing by flushing
symbolic output buffer sob with:
- flush_symbolic_output_buffersob .
typesymbolic_output_item =
| Output_flush (* symbolic flush command
*)
| Output_newline (* symbolic newline command
*)
| Output_string ofstring
(* Output_strings : symbolic output for string s
*)
| Output_spaces ofint
(* Output_spacesn : symbolic command to output n spaces
*)
| Output_indent ofint
(* Output_indenti : symbolic indentation of size i
*)
Items produced by symbolic pretty-printers
Since 4.06
typesymbolic_output_buffer
The output buffer of a symbolic pretty-printer.
Since 4.06
valmake_symbolic_output_buffer : unit->symbolic_output_buffermake_symbolic_output_buffer() returns a fresh buffer for symbolic output.
Since 4.06
valclear_symbolic_output_buffer : symbolic_output_buffer->unitclear_symbolic_output_buffersob resets buffer sob .
Since 4.06
valget_symbolic_output_buffer : symbolic_output_buffer->symbolic_output_itemlistget_symbolic_output_buffersob returns the contents of buffer sob .
Since 4.06
valflush_symbolic_output_buffer : symbolic_output_buffer->symbolic_output_itemlistflush_symbolic_output_buffersob returns the contents of buffer sob and resets buffer sob .
flush_symbolic_output_buffersob is equivalent to letitems=get_symbolic_output_buffersobinclear_symbolic_output_buffersob;itemsSince 4.06
valadd_symbolic_output_item : symbolic_output_buffer->symbolic_output_item->unitadd_symbolic_output_itemsobitm adds item itm to buffer sob .
Since 4.06
valformatter_of_symbolic_output_buffer : symbolic_output_buffer->formatterformatter_of_symbolic_output_buffersob returns a symbolic formatter that outputs to
symbolic_output_buffersob .
Since 4.06
Convenienceformattingfunctions.valpp_print_iter : ?pp_sep:(formatter->unit->unit)->(('a->unit)->'b->unit)->(formatter->'a->unit)->formatter->'b->unitpp_print_iter~pp_sepiterpp_vppfv formats on ppf the iterations of iter over a collection v of values
using pp_v . Iterations are separated by pp_sep (defaults to Format.pp_print_cut ).
Since 5.1
valpp_print_list : ?pp_sep:(formatter->unit->unit)->(formatter->'a->unit)->formatter->'alist->unitpp_print_list?pp_seppp_vppfl prints items of list l , using pp_v to print each item, and calling
pp_sep between items ( pp_sep defaults to Format.pp_print_cut ). Does nothing on empty lists.
Since 4.02
valpp_print_array : ?pp_sep:(formatter->unit->unit)->(formatter->'a->unit)->formatter->'aarray->unitpp_print_array?pp_seppp_vppfa prints items of array a , using pp_v to print each item, and calling
pp_sep between items ( pp_sep defaults to Format.pp_print_cut ). Does nothing on empty arrays.
If a is mutated after pp_print_array is called, the printed values may not be what is expected because
Format can delay the printing. This can be avoided by flushing ppf .
Since 5.1
valpp_print_seq : ?pp_sep:(formatter->unit->unit)->(formatter->'a->unit)->formatter->'aSeq.t->unitpp_print_seq?pp_seppp_vppfs prints items of sequence s , using pp_v to print each item, and calling
pp_sep between items ( pp_sep defaults to Format.pp_print_cut . Does nothing on empty sequences.
This function does not terminate on infinite sequences.
Since 4.12
valpp_print_text : formatter->string->unitpp_print_textppfs prints s with spaces and newlines respectively printed using Format.pp_print_space
and Format.pp_force_newline .
Since 4.02
valpp_print_option : ?none:(formatter->unit->unit)->(formatter->'a->unit)->formatter->'aoption->unitpp_print_option?nonepp_vppfo prints o on ppf using pp_v if o is Somev and none if it is None . none
prints nothing by default.
Since 4.08
valpp_print_result : ok:(formatter->'a->unit)->error:(formatter->'e->unit)->formatter->('a,'e)result->unitpp_print_result~ok~errorppfr prints r on ppf using ok if r is Ok_ and error if r is Error_ .
Since 4.08
valpp_print_either : left:(formatter->'a->unit)->right:(formatter->'b->unit)->formatter->('a,'b)Either.t->unitpp_print_either~left~rightppfe prints e on ppf using left if e is Either.Left_ and right if e is
Either.Right_ .
Since 4.13
Formattedpretty-printing
Module Format provides a complete set of printf like functions for pretty-printing using format string
specifications.
Specific annotations may be added in the format strings to give pretty-printing commands to the
pretty-printing engine.
Those annotations are introduced in the format strings using the @ character. For instance, @ means a
space break, @, means a cut, @[ opens a new box, and @] closes the last open box.
valfprintf : formatter->('a,formatter,unit)format->'afprintffffmtarg1...argN formats the arguments arg1 to argN according to the format string fmt , and
outputs the resulting string on the formatter ff .
The format string fmt is a character string which contains three types of objects: plain characters and
conversion specifications as specified in the Printf module, and pretty-printing indications specific to
the Format module.
The pretty-printing indication characters are introduced by a @ character, and their meanings are:
- @[ : open a pretty-printing box. The type and offset of the box may be optionally specified with the
following syntax: the < character, followed by an optional box type indication, then an optional integer
offset, and the closing > character. Pretty-printing box type is one of h , v , hv , b , or hov . ' h '
stands for an 'horizontal' pretty-printing box, ' v ' stands for a 'vertical' pretty-printing box, ' hv '
stands for an 'horizontal/vertical' pretty-printing box, ' b ' stands for an 'horizontal-or-vertical'
pretty-printing box demonstrating indentation, ' hov ' stands a simple 'horizontal-or-vertical'
pretty-printing box. For instance, @[<hov2> opens an 'horizontal-or-vertical' pretty-printing box with
indentation 2 as obtained with open_hovbox2 . For more details about pretty-printing boxes, see the
various box opening functions open_*box .
- @] : close the most recently opened pretty-printing box.
- @, : output a 'cut' break hint, as with print_cut() .
- @ : output a 'space' break hint, as with print_space() .
- @; : output a 'full' break hint as with print_break . The nspaces and offset parameters of the break
hint may be optionally specified with the following syntax: the < character, followed by an integer
nspaces value, then an integer offset , and a closing > character. If no parameters are provided, the
full break defaults to a 'space' break hint.
- @. : flush the pretty-printer and split the line, as with print_newline() .
- @<n> : print the following item as if it were of length n . Hence, printf"@<0>%s"arg prints arg as a
zero length string. If @<n> is not followed by a conversion specification, then the following character
of the format is printed as if it were of length n .
- @{ : open a semantic tag. The name of the tag may be optionally specified with the following syntax:
the < character, followed by an optional string specification, and the closing > character. The string
specification is any character string that does not contain the closing character '>' . If omitted, the
tag name defaults to the empty string. For more details about semantic tags, see the functions
Format.open_stag and Format.close_stag .
- @} : close the most recently opened semantic tag.
- @? : flush the pretty-printer as with print_flush() . This is equivalent to the conversion %! .
- @\n : force a newline, as with force_newline() , not the normal way of pretty-printing, you should
prefer using break hints inside a vertical pretty-printing box.
Note: To prevent the interpretation of a @ character as a pretty-printing indication, escape it with a %
character. Old quotation mode @@ is deprecated since it is not compatible with formatted input
interpretation of character '@' .
Example: printf"@[%s@%d@]@.""x="1 is equivalent to open_box();print_string"x=";print_space();print_int1;close_box();print_newline() . It prints x=1 within a pretty-printing
'horizontal-or-vertical' box.
valprintf : ('a,formatter,unit)format->'a
Same as fprintf above, but output on get_std_formatter() .
It is defined similarly to funfmt->fprintf(get_std_formatter())fmt but delays calling
get_std_formatter until after the final argument required by the format is received. When used with
multiple domains, the output from the domains will be interleaved with each other at points where the
formatter is flushed, such as with Format.print_flush .
valeprintf : ('a,formatter,unit)format->'a
Same as fprintf above, but output on get_err_formatter() .
It is defined similarly to funfmt->fprintf(get_err_formatter())fmt but delays calling
get_err_formatter until after the final argument required by the format is received. When used with
multiple domains, the output from the domains will be interleaved with each other at points where the
formatter is flushed, such as with Format.print_flush .
valsprintf : ('a,unit,string)format->'a
Same as printf above, but instead of printing on a formatter, returns a string containing the result of
formatting the arguments. Note that the pretty-printer queue is flushed at the end of each call to
sprintf . Note that if your format string contains a %a , you should use asprintf .
In case of multiple and related calls to sprintf to output material on a single string, you should
consider using fprintf with the predefined formatter str_formatter and call flush_str_formatter() to get
the final result.
Alternatively, you can use Format.fprintf with a formatter writing to a buffer of your own: flushing the
formatter and the buffer at the end of pretty-printing returns the desired string.
valasprintf : ('a,formatter,unit,string)format4->'a
Same as printf above, but instead of printing on a formatter, returns a string containing the result of
formatting the arguments. The type of asprintf is general enough to interact nicely with %a conversions.
Since 4.01
valdprintf : ('a,formatter,unit,formatter->unit)format4->'a
Same as Format.fprintf , except the formatter is the last argument. dprintf"..."abc is a function of
type formatter->unit which can be given to a format specifier %t .
This can be used as a replacement for Format.asprintf to delay formatting decisions. Using the string
returned by Format.asprintf in a formatting context forces formatting decisions to be taken in isolation,
and the final string may be created prematurely. Format.dprintf allows delay of formatting decisions
until the final formatting context is known. For example:
lett=Format.dprintf"%i@%i@%i"123in...Format.printf"@[<v>%t@]"tSince 4.08
valifprintf : formatter->('a,formatter,unit)format->'a
Same as fprintf above, but does not print anything. Useful to ignore some material when conditionally
printing.
Since 3.10
Formatted Pretty-Printing with continuations.
valkfprintf : (formatter->'a)->formatter->('b,formatter,unit,'a)format4->'b
Same as fprintf above, but instead of returning immediately, passes the formatter to its first argument
at the end of printing.
valkdprintf : ((formatter->unit)->'a)->('b,formatter,unit,'a)format4->'b
Same as Format.dprintf above, but instead of returning immediately, passes the suspended printer to its
first argument at the end of printing.
Since 4.08
valikfprintf : (formatter->'a)->formatter->('b,formatter,unit,'a)format4->'b
Same as kfprintf above, but does not print anything. Useful to ignore some material when conditionally
printing.
Since 3.12
valksprintf : (string->'a)->('b,unit,string,'a)format4->'b
Same as sprintf above, but instead of returning the string, passes it to the first argument.
valkasprintf : (string->'a)->('b,formatter,unit,'a)format4->'b
Same as asprintf above, but instead of returning the string, passes it to the first argument.
Since 4.03
Examples
A few warmup examples to get an idea of how Format is used.
We have a list l of pairs (int*bool) , which the toplevel prints for us:
#letl=List.init20(funn->n,nmod2=0)vall:(int*bool)list=[(0,true);(1,false);(2,true);(3,false);(4,true);(5,false);(6,true);(7,false);(8,true);(9,false);(10,true);(11,false);(12,true);(13,false);(14,true);(15,false);(16,true);(17,false);(18,true);(19,false)]
If we want to print it ourself without the toplevel magic, we can try this:
#letpp_pairout(x,y)=Format.fprintfout"(%d,%b)"xyvalpp_pair:Format.formatter->int*bool->unit=<fun>#Format.printf"l:[@[<hov>%a@]]@."Format.(pp_print_list~pp_sep:(funout()->fprintfout";@")pp_pair)ll:[(0,true);(1,false);(2,true);(3,false);(4,true);(5,false);(6,true);(7,false);(8,true);(9,false);(10,true);(11,false);(12,true);(13,false);(14,true);(15,false);(16,true);(17,false);(18,true);(19,false)]
What this does, briefly, is:
- pp_pair prints a pair bool*int surrounded in "(" ")". It takes a formatter (into which formatting
happens), and the pair itself. When printing is done it returns () .
- Format.printf"l=[@[<hov>%a@]]@."...l is like printf , but with additional formatting instructions
(denoted with "@"). The pair " @[<hov> " and " @] " is a "horizontal-or-vertical box".
-"@." ends formatting with a newline. It is similar to "\n" but is also aware of the Format.formatter 's
state. Do not use "\n" with Format .
-"%a" is a formatting instruction, like "%d" or "%s" for printf . However, where "%d" prints an integer
and "%s" prints a string, "%a" takes a printer (of type Format.formatter->'a->unit ) and a value (of
type 'a ) and applies the printer to the value. This is key to compositionality of printers.
-We build a list printer using Format.pp_print_list~pp_sep:(...)pp_pair . pp_print_list takes an
element printer and returns a list printer. The ?pp_sep optional argument, if provided, is called in
between each element to print a separator.
-Here, for a separator, we use (funout()->Format.fprintfout";@") . It prints ";", and then "@ "
which is a breaking space (either it prints " ", or it prints a newline if the box is about to overflow).
This "@ " is responsible for the list printing splitting into several lines.
If we omit "@ ", we get an ugly single-line print:
#Format.printf"l:[@[<hov>%a@]]@."Format.(pp_print_list~pp_sep:(funout()->fprintfout";")pp_pair)ll:[(0,true);(1,false);(2,true);(*...*);(18,true);(19,false)]-:unit=()
Generally, it is good practice to define custom printers for important types in your program. If, for
example, you were to define basic geometry types like so:
typepoint={x:float;y:float;}typerectangle={ll:point;(*lowerleft*)ur:point;(*upperright*)}
For debugging purpose, or to display information in logs, or on the console, it would be convenient to
define printers for these types. Here is an example of to do it. Note that "%.3f" is a float printer up
to 3 digits of precision after the dot; "%f" would print as many digits as required, which is somewhat
verbose; "%h" is an hexadecimal float printer.
letpp_pointout(p:point)=Format.fprintfout"{@[x=%.3f;@y=%.3f@]}"p.xp.yletpp_rectangleout(r:rectangle)=Format.fprintfout"{@[ll=%a;@ur=%a@]}"pp_pointr.llpp_pointr.ur
In the .mli file, we could have:
valpp_point:Format.formatter->point->unitvalpp_rectangle:Format.formatter->rectangle->unit
These printers can now be used with "%a" inside other printers.
#Format.printf"somerectangle:%a@."(Format.pp_print_optionpp_rectangle)(Some{ll={x=1.;y=2.};ur={x=42.;y=500.12345}})somerectangle:{l={x=1.000;y=2.000};ur={x=42.000;y=500.123}}#Format.printf"norectangle:%a@."(Format.pp_optionpp_rectangle)Nonenorectangle:
See how we combine pp_print_option (option printer) and our newly defined rectangle printer, like we did
with pp_print_list earlier.
For a more extensive tutorial, see "Using the Format module".
A final note: the Format module is a starting point. The OCaml ecosystem has libraries that makes
formatting easier and more expressive, with more combinators, more concise names, etc. An example of
such a library is Fmt.
Automatic deriving of pretty-printers from type definitions is also possible, using
https://github.com/ocaml-ppx/ppx_deriving or similar ppx derivers.
OCamldoc 2025-06-12 Stdlib.Format(3o)
Install Now
PNG Icons
