voidzwp_linux_buffer_params_v1_t::created(boolpost=true)
buffer creation succeeded
Returns
the newly created wl_buffer
This event indicates that the attempted buffer creation was successful. It provides the new wl_buffer
referencing the dmabuf(s).
Upon receiving this event, the client should destroy the zlinux_dmabuf_params object.
Definition at line 5029 of file wayland-server-protocol-unstable.cpp.
voidzwp_linux_buffer_params_v1_t::failed(boolpost=true)
buffer creation failed This event indicates that the attempted buffer creation has failed. It usually
means that one of the dmabuf constraints has not been fulfilled.
Upon receiving this event, the client should destroy the zlinux_buffer_params object.
Definition at line 5034 of file wayland-server-protocol-unstable.cpp.
std::stringwayland::server::resource_t::get_class()[inherited]
Retrieve the interface name (class) of a resource object.
Returns
Interface name of the resource object.
client_twayland::server::resource_t::get_client()const[inherited]
Get the associated client
Returns
the client that owns the resource.
uint32_twayland::server::resource_t::get_id()const[inherited]
Get the internal ID of the resource
Returns
the internal ID of the resource
unsignedintwayland::server::resource_t::get_version()const[inherited]
Get interface version
Returns
Interface version this resource has been constructed with.
std::function<void(int,uint32_t,uint32_t,uint32_t,uint32_t,uint32_t)>&zwp_linux_buffer_params_v1_t::on_add()
add a dmabuf to the temporary set
Parametersfd dmabuf fd
plane_idx plane index
offset offset in bytes
stride stride in bytes
modifier_hi high 32 bits of layout modifier
modifier_lo low 32 bits of layout modifier
This request adds one dmabuf to the set in this zwp_linux_buffer_params_v1.
The 64-bit unsigned value combined from modifier_hi and modifier_lo is the dmabuf layout modifier. DRM
AddFB2 ioctl calls this the fb modifier, which is defined in drm_mode.h of Linux UAPI. This is an opaque
token. Drivers use this token to express tiling, compression, etc. driver-specific modifications to the
base format defined by the DRM fourcc code.
Starting from version 4, the invalid_format protocol error is sent if the format + modifier pair was not
advertised as supported.
This request raises the PLANE_IDX error if plane_idx is too large. The error PLANE_SET is raised if
attempting to set a plane that was already set.
Definition at line 5011 of file wayland-server-protocol-unstable.cpp.
std::function<void(int32_t,int32_t,uint32_t,zwp_linux_buffer_params_v1_flags)>&zwp_linux_buffer_params_v1_t::on_create()
create a wl_buffer from the given dmabufs
Parameterswidth base plane width in pixels
height base plane height in pixels
format DRM_FORMAT code
flags see enum flags
This asks for creation of a wl_buffer from the added dmabuf buffers. The wl_buffer is not created
immediately but returned via the 'created' event if the dmabuf sharing succeeds. The sharing may fail at
runtime for reasons a client cannot predict, in which case the 'failed' event is triggered.
The 'format' argument is a DRM_FORMAT code, as defined by the libdrm's drm_fourcc.h. The Linux kernel's
DRM sub-system is the authoritative source on how the format codes should work.
The 'flags' is a bitfield of the flags defined in enum 'flags'. 'y_invert' means the that the image needs
to be y-flipped.
Flag 'interlaced' means that the frame in the buffer is not progressive as usual, but interlaced. An
interlaced buffer as supported here must always contain both top and bottom fields. The top field always
begins on the first pixel row. The temporal ordering between the two fields is top field first, unless
'bottom_first' is specified. It is undefined whether 'bottom_first' is ignored if 'interlaced' is not
set.
This protocol does not convey any information about field rate, duration, or timing, other than the
relative ordering between the two fields in one buffer. A compositor may have to estimate the intended
field rate from the incoming buffer rate. It is undefined whether the time of receiving wl_surface.commit
with a new buffer attached, applying the wl_surface state, wl_surface.frame callback trigger,
presentation, or any other point in the compositor cycle is used to measure the frame or field times.
There is no support for detecting missed or late frames/fields/buffers either, and there is no support
whatsoever for cooperating with interlaced compositor output.
The composited image quality resulting from the use of interlaced buffers is explicitly undefined. A
compositor may use elaborate hardware features or software to deinterlace and create progressive output
frames from a sequence of interlaced input buffers, or it may produce substandard image quality. However,
compositors that cannot guarantee reasonable image quality in all cases are recommended to just reject
all interlaced buffers.
Any argument errors, including non-positive width or height, mismatch between the number of planes and
the format, bad format, bad offset or stride, may be indicated by fatal protocol errors: INCOMPLETE,
INVALID_FORMAT, INVALID_DIMENSIONS, OUT_OF_BOUNDS.
Dmabuf import errors in the server that are not obvious client bugs are returned via the 'failed' event
as non-fatal. This allows attempting dmabuf sharing and falling back in the client if it fails.
This request can be sent only once in the object's lifetime, after which the only legal request is
destroy. This object should be destroyed after issuing a 'create' request. Attempting to use this object
after issuing 'create' raises ALREADY_USED protocol error.
It is not mandatory to issue 'create'. If a client wants to cancel the buffer creation, it can just
destroy this object.
Definition at line 5017 of file wayland-server-protocol-unstable.cpp.
std::function<void(buffer_t,int32_t,int32_t,uint32_t,zwp_linux_buffer_params_v1_flags)>&zwp_linux_buffer_params_v1_t::on_create_immed()
immediately create a wl_buffer from the given dmabufs
Parametersbuffer_id id for the newly created wl_buffer
width base plane width in pixels
height base plane height in pixels
format DRM_FORMAT code
flags see enum flags
This asks for immediate creation of a wl_buffer by importing the added dmabufs.
In case of import success, no event is sent from the server, and the wl_buffer is ready to be used by the
client.
Upon import failure, either of the following may happen, as seen fit by the implementation:
• the client is terminated with one of the following fatal protocol errors:
• INCOMPLETE, INVALID_FORMAT, INVALID_DIMENSIONS, OUT_OF_BOUNDS, in case of argument errors such as
mismatch between the number of planes and the format, bad format, non-positive width or height, or
bad offset or stride.
• INVALID_WL_BUFFER, in case the cause for failure is unknown or plaform specific.
• the server creates an invalid wl_buffer, marks it as failed and sends a 'failed' event to the client.
The result of using this invalid wl_buffer as an argument in any request by the client is defined by
the compositor implementation.
This takes the same arguments as a 'create' request, and obeys the same restrictions.
Definition at line 5023 of file wayland-server-protocol-unstable.cpp.
std::function<void()>&zwp_linux_buffer_params_v1_t::on_destroy()
delete this object, used or not Cleans up the temporary data sent to the server for dmabuf-based
wl_buffer creation.
Definition at line 5005 of file wayland-server-protocol-unstable.cpp.
voidzwp_linux_buffer_params_v1_t::post_already_used(std::stringconst&msg)
Post error: the dmabuf_batch object has already been used to create a wl_buffer.
Definition at line 5039 of file wayland-server-protocol-unstable.cpp.
voidzwp_linux_buffer_params_v1_t::post_incomplete(std::stringconst&msg)
Post error: missing or too many planes to create a buffer.
Definition at line 5054 of file wayland-server-protocol-unstable.cpp.
voidzwp_linux_buffer_params_v1_t::post_invalid_dimensions(std::stringconst&msg)
Post error: invalid width or height.
Definition at line 5064 of file wayland-server-protocol-unstable.cpp.
voidzwp_linux_buffer_params_v1_t::post_invalid_format(std::stringconst&msg)
Post error: format not supported.
Definition at line 5059 of file wayland-server-protocol-unstable.cpp.
voidzwp_linux_buffer_params_v1_t::post_invalid_wl_buffer(std::stringconst&msg)
Post error: invalid wl_buffer resulted from importing dmabufs via the create_immed request on given
buffer_params.
Definition at line 5074 of file wayland-server-protocol-unstable.cpp.
voidwayland::server::resource_t::post_no_memory()const[inherited]
Post 'not enough memory' error to the client
If the compositor has not enough memory to fulfill a certail request of the client, this function can be
called to notify the client of this circumstance.
voidzwp_linux_buffer_params_v1_t::post_out_of_bounds(std::stringconst&msg)
Post error: offset + stride * height goes out of dmabuf bounds.
Definition at line 5069 of file wayland-server-protocol-unstable.cpp.
voidzwp_linux_buffer_params_v1_t::post_plane_idx(std::stringconst&msg)
Post error: plane index out of bounds.
Definition at line 5044 of file wayland-server-protocol-unstable.cpp.
voidzwp_linux_buffer_params_v1_t::post_plane_set(std::stringconst&msg)
Post error: the plane index was already set.
Definition at line 5049 of file wayland-server-protocol-unstable.cpp.
boolwayland::server::resource_t::proxy_has_object()const[inherited]
Check whether this wrapper actually wraps an object.
Returns
true if there is an underlying object, false if this wrapper is empty
Install Now
PNG Icons
