$handle = new AnyEvent::Handle fh => $filehandle, key => value...
The constructor supports these arguments (all as "key => value" pairs).
fh => $filehandle ["fh" or "connect" MANDATORY]
The filehandle this AnyEvent::Handle object will operate on. NOTE: The filehandle will be set to
non-blocking mode (using "AnyEvent::fh_unblock") by the constructor and needs to stay in that
mode.
connect => [$host, $service] ["fh" or "connect" MANDATORY]
Try to connect to the specified host and service (port), using "AnyEvent::Socket::tcp_connect".
The $host additionally becomes the default "peername".
You have to specify either this parameter, or "fh", above.
It is possible to push requests on the read and write queues, and modify properties of the
stream, even while AnyEvent::Handle is connecting.
When this parameter is specified, then the "on_prepare", "on_connect_error" and "on_connect"
callbacks will be called under the appropriate circumstances:
on_prepare => $cb->($handle)
This (rarely used) callback is called before a new connection is attempted, but after the
file handle has been created (you can access that file handle via "$handle->{fh}"). It could
be used to prepare the file handle with parameters required for the actual connect (as
opposed to settings that can be changed when the connection is already established).
The return value of this callback should be the connect timeout value in seconds (or 0, or
"undef", or the empty list, to indicate that the default timeout is to be used).
on_connect => $cb->($handle, $host, $port, $retry->())
This callback is called when a connection has been successfully established.
The peer's numeric host and port (the socket peername) are passed as parameters, together
with a retry callback. At the time it is called the read and write queues, EOF status, TLS
status and similar properties of the handle will have been reset.
If, for some reason, the handle is not acceptable, calling $retry will continue with the next
connection target (in case of multi-homed hosts or SRV records there can be multiple
connection endpoints). The $retry callback can be invoked after the connect callback returns,
i.e. one can start a handshake and then decide to retry with the next host if the handshake
fails.
In most cases, you should ignore the $retry parameter.
on_connect_error => $cb->($handle, $message)
This callback is called when the connection could not be established. $! will contain the
relevant error code, and $message a message describing it (usually the same as "$!").
If this callback isn't specified, then "on_error" will be called with a fatal error instead.
on_error => $cb->($handle, $fatal, $message)
This is the error callback, which is called when, well, some error occurred, such as not being
able to resolve the hostname, failure to connect, or a read error.
Some errors are fatal (which is indicated by $fatal being true). On fatal errors the handle
object will be destroyed (by a call to "-> destroy") after invoking the error callback (which
means you are free to examine the handle object). Examples of fatal errors are an EOF condition
with active (but unsatisfiable) read watchers ("EPIPE") or I/O errors. In cases where the other
side can close the connection at will, it is often easiest to not report "EPIPE" errors in this
callback.
AnyEvent::Handle tries to find an appropriate error code for you to check against, but in some
cases (TLS errors), this does not work well.
If you report the error to the user, it is recommended to always output the $message argument in
human-readable error messages (you don't need to report "$!" if you report $message).
If you want to react programmatically to the error, then looking at $! and comparing it against
some of the documented "Errno" values is usually better than looking at the $message.
Non-fatal errors can be retried by returning, but it is recommended to simply ignore this
parameter and instead abondon the handle object when this callback is invoked. Examples of non-
fatal errors are timeouts "ETIMEDOUT") or badly-formatted data ("EBADMSG").
On entry to the callback, the value of $! contains the operating system error code (or "ENOSPC",
"EPIPE", "ETIMEDOUT", "EBADMSG" or "EPROTO").
While not mandatory, it is highly recommended to set this callback, as you will not be notified
of errors otherwise. The default just calls "croak".
on_read => $cb->($handle)
This sets the default read callback, which is called when data arrives and no read request is in
the queue (unlike read queue callbacks, this callback will only be called when at least one octet
of data is in the read buffer).
To access (and remove data from) the read buffer, use the "->rbuf" method or access the
"$handle->{rbuf}" member directly. Note that you must not enlarge or modify the read buffer, you
can only remove data at the beginning from it.
You can also call "->push_read (...)" or any other function that modifies the read queue. Or do
both. Or ...
When an EOF condition is detected, AnyEvent::Handle will first try to feed all the remaining data
to the queued callbacks and "on_read" before calling the "on_eof" callback. If no progress can be
made, then a fatal error will be raised (with $! set to "EPIPE").
Note that, unlike requests in the read queue, an "on_read" callback doesn't mean you require some
data: if there is an EOF and there are outstanding read requests then an error will be flagged.
With an "on_read" callback, the "on_eof" callback will be invoked.
on_eof => $cb->($handle)
Set the callback to be called when an end-of-file condition is detected, i.e. in the case of a
socket, when the other side has closed the connection cleanly, and there are no outstanding read
requests in the queue (if there are read requests, then an EOF counts as an unexpected connection
close and will be flagged as an error).
For sockets, this just means that the other side has stopped sending data, you can still try to
write data, and, in fact, one can return from the EOF callback and continue writing data, as only
the read part has been shut down.
If an EOF condition has been detected but no "on_eof" callback has been set, then a fatal error
will be raised with $! set to <0>.
on_drain => $cb->($handle)
This sets the callback that is called once when the write buffer becomes empty (and immediately
when the handle object is created).
To append to the write buffer, use the "->push_write" method.
This callback is useful when you don't want to put all of your write data into the queue at once,
for example, when you want to write the contents of some file to the socket you might not want to
read the whole file into memory and push it into the queue, but instead only read more data from
the file when the write queue becomes empty.
timeout => $fractional_seconds
rtimeout => $fractional_seconds
wtimeout => $fractional_seconds
If non-zero, then these enables an "inactivity" timeout: whenever this many seconds pass without
a successful read or write on the underlying file handle (or a call to "timeout_reset"), the
"on_timeout" callback will be invoked (and if that one is missing, a non-fatal "ETIMEDOUT" error
will be raised).
There are three variants of the timeouts that work independently of each other, for both read and
write (triggered when nothing was read OR written), just read (triggered when nothing was read),
and just write: "timeout", "rtimeout" and "wtimeout", with corresponding callbacks "on_timeout",
"on_rtimeout" and "on_wtimeout", and reset functions "timeout_reset", "rtimeout_reset", and
"wtimeout_reset".
Note that timeout processing is active even when you do not have any outstanding read or write
requests: If you plan to keep the connection idle then you should disable the timeout temporarily
or ignore the timeout in the corresponding "on_timeout" callback, in which case AnyEvent::Handle
will simply restart the timeout.
Zero (the default) disables the corresponding timeout.
on_timeout => $cb->($handle)
on_rtimeout => $cb->($handle)
on_wtimeout => $cb->($handle)
Called whenever the inactivity timeout passes. If you return from this callback, then the timeout
will be reset as if some activity had happened, so this condition is not fatal in any way.
rbuf_max => <bytes>
If defined, then a fatal error will be raised (with $! set to "ENOSPC") when the read buffer ever
(strictly) exceeds this size. This is useful to avoid some forms of denial-of-service attacks.
For example, a server accepting connections from untrusted sources should be configured to accept
only so-and-so much data that it cannot act on (for example, when expecting a line, an attacker
could send an unlimited amount of data without a callback ever being called as long as the line
isn't finished).
wbuf_max => <bytes>
If defined, then a fatal error will be raised (with $! set to "ENOSPC") when the write buffer
ever (strictly) exceeds this size. This is useful to avoid some forms of denial-of-service
attacks.
Although the units of this parameter is bytes, this is the raw number of bytes not yet accepted
by the kernel. This can make a difference when you e.g. use TLS, as TLS typically makes your
write data larger (but it can also make it smaller due to compression).
As an example of when this limit is useful, take a chat server that sends chat messages to a
client. If the client does not read those in a timely manner then the send buffer in the server
would grow unbounded.
autocork => <boolean>
When disabled (the default), "push_write" will try to immediately write the data to the handle if
possible. This avoids having to register a write watcher and wait for the next event loop
iteration, but can be inefficient if you write multiple small chunks (on the wire, this
disadvantage is usually avoided by your kernel's nagle algorithm, see "no_delay", but this option
can save costly syscalls).
When enabled, writes will always be queued till the next event loop iteration. This is efficient
when you do many small writes per iteration, but less efficient when you do a single write only
per iteration (or when the write buffer often is full). It also increases write latency.
no_delay => <boolean>
When doing small writes on sockets, your operating system kernel might wait a bit for more data
before actually sending it out. This is called the Nagle algorithm, and usually it is beneficial.
In some situations you want as low a delay as possible, which can be accomplishd by setting this
option to a true value.
The default is your operating system's default behaviour (most likely enabled). This option
explicitly enables or disables it, if possible.
keepalive => <boolean>
Enables (default disable) the SO_KEEPALIVE option on the stream socket: normally, TCP connections
have no time-out once established, so TCP connections, once established, can stay alive forever
even when the other side has long gone. TCP keepalives are a cheap way to take down long-lived
TCP connections when the other side becomes unreachable. While the default is OS-dependent, TCP
keepalives usually kick in after around two hours, and, if the other side doesn't reply, take
down the TCP connection some 10 to 15 minutes later.
It is harmless to specify this option for file handles that do not support keepalives, and
enabling it on connections that are potentially long-lived is usually a good idea.
oobinline => <boolean>
BSD majorly fucked up the implementation of TCP urgent data. The result is that almost no OS
implements TCP according to the specs, and every OS implements it slightly differently.
If you want to handle TCP urgent data, then setting this flag (the default is enabled) gives you
the most portable way of getting urgent data, by putting it into the stream.
Since BSD emulation of OOB data on top of TCP's urgent data can have security implications,
AnyEvent::Handle sets this flag automatically unless explicitly specified. Note that setting this
flag after establishing a connection may be a bit too late (data loss could already have occurred
on BSD systems), but at least it will protect you from most attacks.
read_size => <bytes>
The initial read block size, the number of bytes this module will try to read during each loop
iteration. Each handle object will consume at least this amount of memory for the read buffer as
well, so when handling many connections watch out for memory requirements). See also
"max_read_size". Default: 2048.
max_read_size => <bytes>
The maximum read buffer size used by the dynamic adjustment algorithm: Each time AnyEvent::Handle
can read "read_size" bytes in one go it will double "read_size" up to the maximum given by this
option. Default: 131072 or "read_size", whichever is higher.
low_water_mark => <bytes>
Sets the number of bytes (default: 0) that make up an "empty" write buffer: If the buffer reaches
this size or gets even samller it is considered empty.
Sometimes it can be beneficial (for performance reasons) to add data to the write buffer before
it is fully drained, but this is a rare case, as the operating system kernel usually buffers data
as well, so the default is good in almost all cases.
linger => <seconds>
If this is non-zero (default: 3600), the destructor of the AnyEvent::Handle object will check
whether there is still outstanding write data and will install a watcher that will write this
data to the socket. No errors will be reported (this mostly matches how the operating system
treats outstanding data at socket close time).
This will not work for partial TLS data that could not be encoded yet. This data will be lost.
Calling the "stoptls" method in time might help.
peername => $string
A string used to identify the remote site - usually the DNS hostname (not IDN!) used to create
the connection, rarely the IP address.
Apart from being useful in error messages, this string is also used in TLS peername verification
(see "verify_peername" in AnyEvent::TLS). This verification will be skipped when "peername" is
not specified or is "undef".
tls => "accept" | "connect" | Net::SSLeay::SSL object
When this parameter is given, it enables TLS (SSL) mode, that means AnyEvent will start a TLS
handshake as soon as the connection has been established and will transparently encrypt/decrypt
data afterwards.
All TLS protocol errors will be signalled as "EPROTO", with an appropriate error message.
TLS mode requires Net::SSLeay to be installed (it will be loaded automatically when you try to
create a TLS handle): this module doesn't have a dependency on that module, so if your module
requires it, you have to add the dependency yourself. If Net::SSLeay cannot be loaded or is too
old, you get an "EPROTO" error.
Unlike TCP, TLS has a server and client side: for the TLS server side, use "accept", and for the
TLS client side of a connection, use "connect" mode.
You can also provide your own TLS connection object, but you have to make sure that you call
either "Net::SSLeay::set_connect_state" or "Net::SSLeay::set_accept_state" on it before you pass
it to AnyEvent::Handle. Also, this module will take ownership of this connection object.
At some future point, AnyEvent::Handle might switch to another TLS implementation, then the
option to use your own session object will go away.
IMPORTANT: since Net::SSLeay "objects" are really only integers, passing in the wrong integer
will lead to certain crash. This most often happens when one uses a stylish "tls => 1" and is
surprised about the segmentation fault.
Use the "->starttls" method if you need to start TLS negotiation later.
tls_ctx => $anyevent_tls
Use the given "AnyEvent::TLS" object to create the new TLS connection (unless a connection object
was specified directly). If this parameter is missing (or "undef"), then AnyEvent::Handle will
use "AnyEvent::Handle::TLS_CTX".
Instead of an object, you can also specify a hash reference with "key => value" pairs. Those will
be passed to AnyEvent::TLS to create a new TLS context object.
on_starttls => $cb->($handle, $success[, $error_message])
This callback will be invoked when the TLS/SSL handshake has finished. If $success is true, then
the TLS handshake succeeded, otherwise it failed ("on_stoptls" will not be called in this case).
The session in "$handle->{tls}" can still be examined in this callback, even when the handshake
was not successful.
TLS handshake failures will not cause "on_error" to be invoked when this callback is in effect,
instead, the error message will be passed to "on_starttls".
Without this callback, handshake failures lead to "on_error" being called as usual.
Note that you cannot just call "starttls" again in this callback. If you need to do that, start
an zero-second timer instead whose callback can then call "->starttls" again.
on_stoptls => $cb->($handle)
When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is set, then it will be
invoked after freeing the TLS session. If it is not, then a TLS shutdown condition will be
treated like a normal EOF condition on the handle.
The session in "$handle->{tls}" can still be examined in this callback.
This callback will only be called on TLS shutdowns, not when the underlying handle signals EOF.
json => JSON, JSON::PP or JSON::XS object
This is the json coder object used by the "json" read and write types.
If you don't supply it, then AnyEvent::Handle will create and use a suitable one (on demand),
which will write and expect UTF-8 encoded JSON texts (either using JSON::XS or JSON). The written
texts are guaranteed not to contain any newline character.
For security reasons, this encoder will likely not handle numbers and strings, only arrays and
objects/hashes. The reason is that originally JSON was self-delimited, but Dougles Crockford
thought it was a splendid idea to redefine JSON incompatibly, so this is no longer true.
For protocols that used back-to-back JSON texts, this might lead to run-ins, where two or more
JSON texts will be interpreted as one JSON text.
For this reason, if the default encoder uses JSON::XS, it will default to not allowing anything
but arrays and objects/hashes, at least for the foreseeable future (it will change at some
point). This might or might not be true for the JSON module, so this might cause a security
issue.
If you depend on either behaviour, you should create your own json object and pass it in
explicitly.
cbor => CBOR::XS object
This is the cbor coder object used by the "cbor" read and write types.
If you don't supply it, then AnyEvent::Handle will create and use a suitable one (on demand),
which will write CBOR without using extensions, if possible.
Note that you are responsible to depend on the CBOR::XS module if you want to use this
functionality, as AnyEvent does not have a dependency on it itself.
$fh = $handle->fh
This method returns the file handle used to create the AnyEvent::Handle object.
$handle->on_error ($cb)
Replace the current "on_error" callback (see the "on_error" constructor argument).
$handle->on_eof ($cb)
Replace the current "on_eof" callback (see the "on_eof" constructor argument).
$handle->on_timeout ($cb)
$handle->on_rtimeout ($cb)
$handle->on_wtimeout ($cb)
Replace the current "on_timeout", "on_rtimeout" or "on_wtimeout" callback, or disables the callback
(but not the timeout) if $cb = "undef". See the "timeout" constructor argument and method.
$handle->autocork ($boolean)
Enables or disables the current autocork behaviour (see "autocork" constructor argument). Changes
will only take effect on the next write.
$handle->no_delay ($boolean)
Enables or disables the "no_delay" setting (see constructor argument of the same name for details).
$handle->keepalive ($boolean)
Enables or disables the "keepalive" setting (see constructor argument of the same name for details).
$handle->oobinline ($boolean)
Enables or disables the "oobinline" setting (see constructor argument of the same name for details).
$handle->on_starttls ($cb)
Replace the current "on_starttls" callback (see the "on_starttls" constructor argument).
$handle->on_stoptls ($cb)
Replace the current "on_stoptls" callback (see the "on_stoptls" constructor argument).
$handle->rbuf_max ($max_octets)
Configures the "rbuf_max" setting ("undef" disables it).
$handle->wbuf_max ($max_octets)
Configures the "wbuf_max" setting ("undef" disables it).
$handle->timeout ($seconds)
$handle->rtimeout ($seconds)
$handle->wtimeout ($seconds)
Configures (or disables) the inactivity timeout.
The timeout will be checked instantly, so this method might destroy the handle before it returns.
$handle->timeout_reset
$handle->rtimeout_reset
$handle->wtimeout_reset
Reset the activity timeout, as if data was received or sent.
These methods are cheap to call.
WRITEQUEUE
AnyEvent::Handle manages two queues per handle, one for writing and one for reading.
The write queue is very simple: you can add data to its end, and AnyEvent::Handle will automatically try
to get rid of it for you.
When data could be written and the write buffer is shorter then the low water mark, the "on_drain"
callback will be invoked once.
$handle->on_drain ($cb)
Sets the "on_drain" callback or clears it (see the description of "on_drain" in the constructor).
This method may invoke callbacks (and therefore the handle might be destroyed after it returns).
$handle->push_write ($data)
Queues the given scalar to be written. You can push as much data as you want (only limited by the
available memory and "wbuf_max"), as "AnyEvent::Handle" buffers it independently of the kernel.
This method may invoke callbacks (and therefore the handle might be destroyed after it returns).
$handle->push_write (type => @args)
Instead of formatting your data yourself, you can also let this module do the job by specifying a
type and type-specific arguments. You can also specify the (fully qualified) name of a package, in
which case AnyEvent tries to load the package and then expects to find the "anyevent_write_type"
function inside (see "custom write types", below).
Predefined types are (if you have ideas for additional types, feel free to drop by and tell us):
netstring => $string
Formats the given value as netstring (http://cr.yp.to/proto/netstrings.txt, this is not a
recommendation to use them).
packstring => $format, $data
An octet string prefixed with an encoded length. The encoding $format uses the same format as a
Perl "pack" format, but must specify a single integer only (only one of "cCsSlLqQiInNvVjJw" is
allowed, plus an optional "!", "<" or ">" modifier).
json => $array_or_hashref
Encodes the given hash or array reference into a JSON object. Unless you provide your own JSON
object, this means it will be encoded to JSON text in UTF-8.
The default encoder might or might not handle every type of JSON value - it might be limited to
arrays and objects for security reasons. See the "json" constructor attribute for more details.
JSON objects (and arrays) are self-delimiting, so if you only use arrays and hashes, you can
write JSON at one end of a handle and read them at the other end without using any additional
framing.
The JSON text generated by the default encoder is guaranteed not to contain any newlines: While
this module doesn't need delimiters after or between JSON texts to be able to read them, many
other languages depend on them.
A simple RPC protocol that interoperates easily with other languages is to send JSON arrays (or
objects, although arrays are usually the better choice as they mimic how function argument
passing works) and a newline after each JSON text:
$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
$handle->push_write ("\012");
An AnyEvent::Handle receiver would simply use the "json" read type and rely on the fact that the
newline will be skipped as leading whitespace:
$handle->push_read (json => sub { my $array = $_[1]; ... });
Other languages could read single lines terminated by a newline and pass this line into their
JSON decoder of choice.
cbor => $perl_scalar
Encodes the given scalar into a CBOR value. Unless you provide your own CBOR::XS object, this
means it will be encoded to a CBOR string not using any extensions, if possible.
CBOR values are self-delimiting, so you can write CBOR at one end of a handle and read them at
the other end without using any additional framing.
A simple nd very very fast RPC protocol that interoperates with other languages is to send CBOR
and receive CBOR values (arrays are recommended):
$handle->push_write (cbor => ["method", "arg1", "arg2"]); # whatever
An AnyEvent::Handle receiver would simply use the "cbor" read type:
$handle->push_read (cbor => sub { my $array = $_[1]; ... });
storable => $reference
Freezes the given reference using Storable and writes it to the handle. Uses the "nfreeze"
format.
$handle->push_shutdown
Sometimes you know you want to close the socket after writing your data before it was actually
written. One way to do that is to replace your "on_drain" handler by a callback that shuts down the
socket (and set "low_water_mark" to 0). This method is a shorthand for just that, and replaces the
"on_drain" callback with:
sub { shutdown $_[0]{fh}, 1 }
This simply shuts down the write side and signals an EOF condition to the the peer.
You can rely on the normal read queue and "on_eof" handling afterwards. This is the cleanest way to
close a connection.
This method may invoke callbacks (and therefore the handle might be destroyed after it returns).
custom write types - Package::anyevent_write_type $handle, @args
Instead of one of the predefined types, you can also specify the name of a package. AnyEvent will try
to load the package and then expects to find a function named "anyevent_write_type" inside. If it
isn't found, it progressively tries to load the parent package until it either finds the function
(good) or runs out of packages (bad).
Whenever the given "type" is used, "push_write" will the function with the handle object and the
remaining arguments.
The function is supposed to return a single octet string that will be appended to the write buffer,
so you can mentally treat this function as a "arguments to on-the-wire-format" converter.
Example: implement a custom write type "join" that joins the remaining arguments using the first one.
$handle->push_write (My::Type => " ", 1,2,3);
# uses the following package, which can be defined in the "My::Type" or in
# the "My" modules to be auto-loaded, or just about anywhere when the
# My::Type::anyevent_write_type is defined before invoking it.
package My::Type;
sub anyevent_write_type {
my ($handle, $delim, @args) = @_;
join $delim, @args
}
READQUEUE
AnyEvent::Handle manages two queues per handle, one for writing and one for reading.
The read queue is more complex than the write queue. It can be used in two ways, the "simple" way, using
only "on_read" and the "complex" way, using a queue.
In the simple case, you just install an "on_read" callback and whenever new data arrives, it will be
called. You can then remove some data (if enough is there) from the read buffer ("$handle->rbuf"). Or you
can leave the data there if you want to accumulate more (e.g. when only a partial message has been
received so far), or change the read queue with e.g. "push_read".
In the more complex case, you want to queue multiple callbacks. In this case, AnyEvent::Handle will call
the first queued callback each time new data arrives (also the first time it is queued) and remove it
when it has done its job (see "push_read", below).
This way you can, for example, push three line-reads, followed by reading a chunk of data, and
AnyEvent::Handle will execute them in order.
Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by the specified number of bytes
which give an XML datagram.
# in the default state, expect some header bytes
$handle->on_read (sub {
# some data is here, now queue the length-header-read (4 octets)
shift->unshift_read (chunk => 4, sub {
# header arrived, decode
my $len = unpack "N", $_[1];
# now read the payload
shift->unshift_read (chunk => $len, sub {
my $xml = $_[1];
# handle xml
});
});
});
Example 2: Implement a client for a protocol that replies either with "OK" and another line or "ERROR"
for the first request that is sent, and 64 bytes for the second request. Due to the availability of a
queue, we can just pipeline sending both requests and manipulate the queue as necessary in the callbacks.
When the first callback is called and sees an "OK" response, it will "unshift" another line-read. This
line-read will be queued before the 64-byte chunk callback.
# request one, returns either "OK + extra line" or "ERROR"
$handle->push_write ("request 1\015\012");
# we expect "ERROR" or "OK" as response, so push a line read
$handle->push_read (line => sub {
# if we got an "OK", we have to _prepend_ another line,
# so it will be read before the second request reads its 64 bytes
# which are already in the queue when this callback is called
# we don't do this in case we got an error
if ($_[1] eq "OK") {
$_[0]->unshift_read (line => sub {
my $response = $_[1];
...
});
}
});
# request two, simply returns 64 octets
$handle->push_write ("request 2\015\012");
# simply read 64 bytes, always
$handle->push_read (chunk => 64, sub {
my $response = $_[1];
...
});
$handle->on_read ($cb)
This replaces the currently set "on_read" callback, or clears it (when the new callback is "undef").
See the description of "on_read" in the constructor.
This method may invoke callbacks (and therefore the handle might be destroyed after it returns).
$handle->rbuf
Returns the read buffer (as a modifiable lvalue). You can also access the read buffer directly as the
"->{rbuf}" member, if you want (this is much faster, and no less clean).
The only operation allowed on the read buffer (apart from looking at it) is removing data from its
beginning. Otherwise modifying or appending to it is not allowed and will lead to hard-to-track-down
bugs.
NOTE: The read buffer should only be used or modified in the "on_read" callback or when "push_read"
or "unshift_read" are used with a single callback (i.e. untyped). Typed "push_read" and
"unshift_read" methods will manage the read buffer on their own.
$handle->push_read ($cb)
$handle->unshift_read ($cb)
Append the given callback to the end of the queue ("push_read") or prepend it ("unshift_read").
The callback is called each time some additional read data arrives.
It must check whether enough data is in the read buffer already.
If not enough data is available, it must return the empty list or a false value, in which case it
will be called repeatedly until enough data is available (or an error condition is detected).
If enough data was available, then the callback must remove all data it is interested in (which can
be none at all) and return a true value. After returning true, it will be removed from the queue.
These methods may invoke callbacks (and therefore the handle might be destroyed after it returns).
$handle->push_read (type => @args, $cb)
$handle->unshift_read (type => @args, $cb)
Instead of providing a callback that parses the data itself you can chose between a number of
predefined parsing formats, for chunks of data, lines etc. You can also specify the (fully qualified)
name of a package, in which case AnyEvent tries to load the package and then expects to find the
"anyevent_read_type" function inside (see "custom read types", below).
Predefined types are (if you have ideas for additional types, feel free to drop by and tell us):
chunk => $octets, $cb->($handle, $data)
Invoke the callback only once $octets bytes have been read. Pass the data read to the callback.
The callback will never be called with less data.
Example: read 2 bytes.
$handle->push_read (chunk => 2, sub {
say "yay " . unpack "H*", $_[1];
});
line => [$eol, ]$cb->($handle, $line, $eol)
The callback will be called only once a full line (including the end of line marker, $eol) has
been read. This line (excluding the end of line marker) will be passed to the callback as second
argument ($line), and the end of line marker as the third argument ($eol).
The end of line marker, $eol, can be either a string, in which case it will be interpreted as a
fixed record end marker, or it can be a regex object (e.g. created by "qr"), in which case it is
interpreted as a regular expression.
The end of line marker argument $eol is optional, if it is missing (NOT undef), then
"qr|\015?\012|" is used (which is good for most internet protocols).
Partial lines at the end of the stream will never be returned, as they are not marked by the end
of line marker.
regex => $accept[, $reject[, $skip], $cb->($handle, $data)
Makes a regex match against the regex object $accept and returns everything up to and including
the match. All the usual regex variables ($1, %+ etc.) from the regex match are available in the
callback.
Example: read a single line terminated by '\n'.
$handle->push_read (regex => qr<\n>, sub { ... });
If $reject is given and not undef, then it determines when the data is to be rejected: it is
matched against the data when the $accept regex does not match and generates an "EBADMSG" error
when it matches. This is useful to quickly reject wrong data (to avoid waiting for a timeout or a
receive buffer overflow).
Example: expect a single decimal number followed by whitespace, reject anything else (not the use
of an anchor).
$handle->push_read (regex => qr<^[0-9]+\s>, qr<[^0-9]>, sub { ... });
If $skip is given and not "undef", then it will be matched against the receive buffer when
neither $accept nor $reject match, and everything preceding and including the match will be
accepted unconditionally. This is useful to skip large amounts of data that you know cannot be
matched, so that the $accept or $reject regex do not have to start matching from the beginning.
This is purely an optimisation and is usually worth it only when you expect more than a few
kilobytes.
Example: expect a http header, which ends at "\015\012\015\012". Since we expect the header to be
very large (it isn't in practice, but...), we use a skip regex to skip initial portions. The skip
regex is tricky in that it only accepts something not ending in either \015 or \012, as these are
required for the accept regex.
$handle->push_read (regex =>
qr<\015\012\015\012>,
undef, # no reject
qr<^.*[^\015\012]>,
sub { ... });
netstring => $cb->($handle, $string)
A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
Throws an error with $! set to EBADMSG on format violations.
packstring => $format, $cb->($handle, $string)
An octet string prefixed with an encoded length. The encoding $format uses the same format as a
Perl "pack" format, but must specify a single integer only (only one of "cCsSlLqQiInNvVjJw" is
allowed, plus an optional "!", "<" or ">" modifier).
For example, DNS over TCP uses a prefix of "n" (2 octet network order), EPP uses a prefix of "N"
(4 octtes).
Example: read a block of data prefixed by its length in BER-encoded format (very efficient).
$handle->push_read (packstring => "w", sub {
my ($handle, $data) = @_;
});
json => $cb->($handle, $hash_or_arrayref)
Reads a JSON object or array, decodes it and passes it to the callback. When a parse error
occurs, an "EBADMSG" error will be raised.
If a "json" object was passed to the constructor, then that will be used for the final decode,
otherwise it will create a JSON::XS or JSON::PP coder object expecting UTF-8.
This read type uses the incremental parser available with JSON version 2.09 (and JSON::XS version
2.2) and above.
Since JSON texts are fully self-delimiting, the "json" read and write types are an ideal simple
RPC protocol: just exchange JSON datagrams. See the "json" write type description, above, for an
actual example.
cbor => $cb->($handle, $scalar)
Reads a CBOR value, decodes it and passes it to the callback. When a parse error occurs, an
"EBADMSG" error will be raised.
If a CBOR::XS object was passed to the constructor, then that will be used for the final decode,
otherwise it will create a CBOR coder without enabling any options.
You have to provide a dependency to CBOR::XS on your own: this module will load the CBOR::XS
module, but AnyEvent does not depend on it itself.
Since CBOR values are fully self-delimiting, the "cbor" read and write types are an ideal simple
RPC protocol: just exchange CBOR datagrams. See the "cbor" write type description, above, for an
actual example.
storable => $cb->($handle, $ref)
Deserialises a Storable frozen representation as written by the "storable" write type (BER-
encoded length prefix followed by nfreeze'd data).
Raises "EBADMSG" error if the data could not be decoded.
tls_detect => $cb->($handle, $detect, $major, $minor)
Checks the input stream for a valid SSL or TLS handshake TLSPaintext record without consuming
anything. Only SSL version 3 or higher is handled, up to the fictituous protocol 4.x (but both
SSL3+ and SSL2-compatible framing is supported).
If it detects that the input data is likely TLS, it calls the callback with a true value for
$detect and the (on-wire) TLS version as second and third argument ($major is 3, and $minor is
0..4 for SSL 3.0, TLS 1.0, 1.1, 1.2 and 1.3, respectively). If it detects the input to be
definitely not TLS, it calls the callback with a false value for $detect.
The callback could use this information to decide whether or not to start TLS negotiation.
In all cases the data read so far is passed to the following read handlers.
Usually you want to use the "tls_autostart" read type instead.
If you want to design a protocol that works in the presence of TLS dtection, make sure that any
non-TLS data doesn't start with the octet 22 (ASCII SYN, 16 hex) or 128-255 (i.e. highest bit
set). The checks this read type does are a bit more strict, but might losen in the future to
accommodate protocol changes.
This read type does not rely on AnyEvent::TLS (and thus, not on Net::SSLeay).
tls_autostart => [$tls_ctx, ]$tls
Tries to detect a valid SSL or TLS handshake. If one is detected, it tries to start tls by
calling "starttls" with the given arguments.
In practise, $tls must be "accept", or a Net::SSLeay context that has been configured to accept,
as servers do not normally send a handshake on their own and ths cannot be detected in this way.
See "tls_detect" above for more details.
Example: give the client a chance to start TLS before accepting a text line.
$hdl->push_read (tls_autostart => "accept");
$hdl->push_read (line => sub {
print "received ", ($_[0]{tls} ? "encrypted" : "cleartext"), " <$_[1]>\n";
});
custom read types - Package::anyevent_read_type $handle, $cb, @args
Instead of one of the predefined types, you can also specify the name of a package. AnyEvent will try
to load the package and then expects to find a function named "anyevent_read_type" inside. If it
isn't found, it progressively tries to load the parent package until it either finds the function
(good) or runs out of packages (bad).
Whenever this type is used, "push_read" will invoke the function with the handle object, the original
callback and the remaining arguments.
The function is supposed to return a callback (usually a closure) that works as a plain read callback
(see "->push_read ($cb)"), so you can mentally treat the function as a "configurable read type to
read callback" converter.
It should invoke the original callback when it is done reading (remember to pass $handle as first
argument as all other callbacks do that, although there is no strict requirement on this).
For examples, see the source of this module (perldoc-mAnyEvent::Handle, search for
"register_read_type")).
$handle->stop_read
$handle->start_read
In rare cases you actually do not want to read anything from the socket. In this case you can call
"stop_read". Neither "on_read" nor any queued callbacks will be executed then. To start reading
again, call "start_read".
Note that AnyEvent::Handle will automatically "start_read" for you when you change the "on_read"
callback or push/unshift a read callback, and it will automatically "stop_read" for you when neither
"on_read" is set nor there are any read requests in the queue.
In older versions of this module (<= 5.3), these methods had no effect, as TLS does not support half-
duplex connections. In current versions they work as expected, as this behaviour is required to avoid
certain resource attacks, where the program would be forced to read (and buffer) arbitrary amounts of
data before being able to send some data. The drawback is that some readings of the the SSL/TLS
specifications basically require this attack to be working, as SSL/TLS implementations might stall
sending data during a rehandshake.
As a guideline, during the initial handshake, you should not stop reading, and as a client, it might
cause problems, depending on your application.
$handle->starttls ($tls[, $tls_ctx])
Instead of starting TLS negotiation immediately when the AnyEvent::Handle object is created, you can
also do that at a later time by calling "starttls". See the "tls" constructor argument for general
info.
Starting TLS is currently an asynchronous operation - when you push some write data and then call
"->starttls" then TLS negotiation will start immediately, after which the queued write data is then
sent. This might change in future versions, so best make sure you have no outstanding write data when
calling this method.
The first argument is the same as the "tls" constructor argument (either "connect", "accept" or an
existing Net::SSLeay object).
The second argument is the optional "AnyEvent::TLS" object that is used when AnyEvent::Handle has to
create its own TLS connection object, or a hash reference with "key => value" pairs that will be used
to construct a new context.
The TLS connection object will end up in "$handle->{tls}", the TLS context in "$handle->{tls_ctx}"
after this call and can be used or changed to your liking. Note that the handshake might have already
started when this function returns.
Due to bugs in OpenSSL, it might or might not be possible to do multiple handshakes on the same
stream. It is best to not attempt to use the stream after stopping TLS.
This method may invoke callbacks (and therefore the handle might be destroyed after it returns).
$handle->stoptls
Shuts down the SSL connection - this makes a proper EOF handshake by sending a close notify to the
other side, but since OpenSSL doesn't support non-blocking shut downs, it is not guaranteed that you
can re-use the stream afterwards.
This method may invoke callbacks (and therefore the handle might be destroyed after it returns).
$handle->resettls
This rarely-used method simply resets and TLS state on the handle, usually causing data loss.
One case where it may be useful is when you want to skip over the data in the stream but you are not
interested in interpreting it, so data loss is no concern.
$handle->destroy
Shuts down the handle object as much as possible - this call ensures that no further callbacks will
be invoked and as many resources as possible will be freed. Any method you will call on the handle
object after destroying it in this way will be silently ignored (and it will return the empty list).
Normally, you can just "forget" any references to an AnyEvent::Handle object and it will simply shut
down. This works in fatal error and EOF callbacks, as well as code outside. It does NOT work in a
read or write callback, so when you want to destroy the AnyEvent::Handle object from within such an
callback. You MUST call "->destroy" explicitly in that case.
Destroying the handle object in this way has the advantage that callbacks will be removed as well, so
if those are the only reference holders (as is common), then one doesn't need to do anything special
to break any reference cycles.
The handle might still linger in the background and write out remaining data, as specified by the
"linger" option, however.
$handle->destroyed
Returns false as long as the handle hasn't been destroyed by a call to "->destroy", true otherwise.
Can be useful to decide whether the handle is still valid after some callback possibly destroyed the
handle. For example, "->push_write", "->starttls" and other methods can call user callbacks, which in
turn can destroy the handle, so work can be avoided by checking sometimes:
$hdl->starttls ("accept");
return if $hdl->destroyed;
$hdl->push_write (...
Note that the call to "push_write" will silently be ignored if the handle has been destroyed, so
often you can just ignore the possibility of the handle being destroyed.
AnyEvent::Handle::TLS_CTX
This function creates and returns the AnyEvent::TLS object used by default for TLS mode.
The context is created by calling AnyEvent::TLS without any arguments.
Install Now
PNG Icons
