int32_tnew_event_threshold
A backpressure threshold for new event enqueues on this port. Use for closedsystem event dev where event
capacity is limited, and cannot exceed the capacity of the event dev.
Configuring ports with different thresholds can make higher priority traffic less likely to be
backpressured. For example, a port used to inject NIC Rx packets into the event dev can have a lower
threshold so as not to overwhelm the device, while ports used for worker pools can have a higher
threshold. This value cannot exceed the rte_event_dev_config::nb_events_limit value which was previously
supplied to rte_event_dev_configure().
This should be set to '-1' for opensystem, i.e when rte_event_dev_info::max_num_events == -1.
Definition at line 1178 of file rte_eventdev.h.
uint16_tdequeue_depth
Configure the maximum size of burst dequeues for this event port. This value cannot exceed the
rte_event_dev_config::nb_event_port_dequeue_depth value which was previously supplied to
rte_event_dev_configure().
Ignored when device does not support the RTE_EVENT_DEV_CAP_BURST_MODE capability.
Definition at line 1194 of file rte_eventdev.h.
uint16_tenqueue_depth
Configure the maximum size of burst enqueues to this event port. This value cannot exceed the
rte_event_dev_config::nb_event_port_enqueue_depth value which was previously supplied to
rte_event_dev_configure().
Ignored when device does not support the RTE_EVENT_DEV_CAP_BURST_MODE capability.
Definition at line 1201 of file rte_eventdev.h.
uint32_tevent_port_cfg
Port configuration flags(EVENT_PORT_CFG_)
Definition at line 1208 of file rte_eventdev.h.