geesx - geesx: Schur form, expert

Generated automatically by Doxygen for LAPACK from the source code. Version 3.12.0 Sun Jul 20 2025 01:40:05 geesx(3)

subroutinecgeesx(characterjobvs,charactersort,externalselect,charactersense,integern,complex,dimension(lda,*)a,integerlda,integersdim,complex,dimension(*)w,complex,dimension(ldvs,*)vs,integerldvs,realrconde,realrcondv,complex,dimension(*)work,integerlwork,real,dimension(*)rwork,logical,dimension(*)bwork,integerinfo)CGEESXcomputestheeigenvalues,theSchurform,and,optionally,thematrixofSchurvectorsforGEmatricesPurpose: CGEESX computes for an N-by-N complex nonsymmetric matrix A, the eigenvalues, the Schur form T, and, optionally, the matrix of Schur vectors Z. This gives the Schur factorization A = Z*T*(Z**H). Optionally, it also orders the eigenvalues on the diagonal of the Schur form so that selected eigenvalues are at the top left; computes a reciprocal condition number for the average of the selected eigenvalues (RCONDE); and computes a reciprocal condition number for the right invariant subspace corresponding to the selected eigenvalues (RCONDV). The leading columns of Z form an orthonormal basis for this invariant subspace. For further explanation of the reciprocal condition numbers RCONDE and RCONDV, see Section 4.10 of the LAPACK Users' Guide (where these quantities are called s and sep respectively). A complex matrix is in Schur form if it is upper triangular. ParametersJOBVS JOBVS is CHARACTER*1 = 'N': Schur vectors are not computed; = 'V': Schur vectors are computed. SORT SORT is CHARACTER*1 Specifies whether or not to order the eigenvalues on the diagonal of the Schur form. = 'N': Eigenvalues are not ordered; = 'S': Eigenvalues are ordered (see SELECT). SELECT SELECT is a LOGICAL FUNCTION of one COMPLEX argument SELECT must be declared EXTERNAL in the calling subroutine. If SORT = 'S', SELECT is used to select eigenvalues to order to the top left of the Schur form. If SORT = 'N', SELECT is not referenced. An eigenvalue W(j) is selected if SELECT(W(j)) is true. SENSE SENSE is CHARACTER*1 Determines which reciprocal condition numbers are computed. = 'N': None are computed; = 'E': Computed for average of selected eigenvalues only; = 'V': Computed for selected right invariant subspace only; = 'B': Computed for both. If SENSE = 'E', 'V' or 'B', SORT must equal 'S'. N N is INTEGER The order of the matrix A. N >= 0. A A is COMPLEX array, dimension (LDA, N) On entry, the N-by-N matrix A. On exit, A is overwritten by its Schur form T. LDA LDA is INTEGER The leading dimension of the array A. LDA >= max(1,N). SDIM SDIM is INTEGER If SORT = 'N', SDIM = 0. If SORT = 'S', SDIM = number of eigenvalues for which SELECT is true. W W is COMPLEX array, dimension (N) W contains the computed eigenvalues, in the same order that they appear on the diagonal of the output Schur form T. VS VS is COMPLEX array, dimension (LDVS,N) If JOBVS = 'V', VS contains the unitary matrix Z of Schur vectors. If JOBVS = 'N', VS is not referenced. LDVS LDVS is INTEGER The leading dimension of the array VS. LDVS >= 1, and if JOBVS = 'V', LDVS >= N. RCONDE RCONDE is REAL If SENSE = 'E' or 'B', RCONDE contains the reciprocal condition number for the average of the selected eigenvalues. Not referenced if SENSE = 'N' or 'V'. RCONDV RCONDV is REAL If SENSE = 'V' or 'B', RCONDV contains the reciprocal condition number for the selected right invariant subspace. Not referenced if SENSE = 'N' or 'E'. WORK WORK is COMPLEX array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. LWORK LWORK is INTEGER The dimension of the array WORK. LWORK >= max(1,2*N). Also, if SENSE = 'E' or 'V' or 'B', LWORK >= 2*SDIM*(N-SDIM), where SDIM is the number of selected eigenvalues computed by this routine. Note that 2*SDIM*(N-SDIM) <= N*N/2. Note also that an error is only returned if LWORK < max(1,2*N), but if SENSE = 'E' or 'V' or 'B' this may not be large enough. For good performance, LWORK must generally be larger. If LWORK = -1, then a workspace query is assumed; the routine only calculates upper bound on the optimal size of the array WORK, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued by XERBLA. RWORK RWORK is REAL array, dimension (N) BWORK BWORK is LOGICAL array, dimension (N) Not referenced if SORT = 'N'. INFO INFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal value. > 0: if INFO = i, and i is <= N: the QR algorithm failed to compute all the eigenvalues; elements 1:ILO-1 and i+1:N of W contain those eigenvalues which have converged; if JOBVS = 'V', VS contains the transformation which reduces A to its partially converged Schur form. = N+1: the eigenvalues could not be reordered because some eigenvalues were too close to separate (the problem is very ill-conditioned); = N+2: after reordering, roundoff changed values of some complex eigenvalues so that leading eigenvalues in the Schur form no longer satisfy SELECT=.TRUE. This could also be caused by underflow due to scaling. Author Univ. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd. subroutinedgeesx(characterjobvs,charactersort,externalselect,charactersense,integern,doubleprecision,dimension(lda,*)a,integerlda,integersdim,doubleprecision,dimension(*)wr,doubleprecision,dimension(*)wi,doubleprecision,dimension(ldvs,*)vs,integerldvs,doubleprecisionrconde,doubleprecisionrcondv,doubleprecision,dimension(*)work,integerlwork,integer,dimension(*)iwork,integerliwork,logical,dimension(*)bwork,integerinfo)DGEESXcomputestheeigenvalues,theSchurform,and,optionally,thematrixofSchurvectorsforGEmatricesPurpose: DGEESX computes for an N-by-N real nonsymmetric matrix A, the eigenvalues, the real Schur form T, and, optionally, the matrix of Schur vectors Z. This gives the Schur factorization A = Z*T*(Z**T). Optionally, it also orders the eigenvalues on the diagonal of the real Schur form so that selected eigenvalues are at the top left; computes a reciprocal condition number for the average of the selected eigenvalues (RCONDE); and computes a reciprocal condition number for the right invariant subspace corresponding to the selected eigenvalues (RCONDV). The leading columns of Z form an orthonormal basis for this invariant subspace. For further explanation of the reciprocal condition numbers RCONDE and RCONDV, see Section 4.10 of the LAPACK Users' Guide (where these quantities are called s and sep respectively). A real matrix is in real Schur form if it is upper quasi-triangular with 1-by-1 and 2-by-2 blocks. 2-by-2 blocks will be standardized in the form [ a b ] [ c a ] where b*c < 0. The eigenvalues of such a block are a +- sqrt(bc). ParametersJOBVS JOBVS is CHARACTER*1 = 'N': Schur vectors are not computed; = 'V': Schur vectors are computed. SORT SORT is CHARACTER*1 Specifies whether or not to order the eigenvalues on the diagonal of the Schur form. = 'N': Eigenvalues are not ordered; = 'S': Eigenvalues are ordered (see SELECT). SELECT SELECT is a LOGICAL FUNCTION of two DOUBLE PRECISION arguments SELECT must be declared EXTERNAL in the calling subroutine. If SORT = 'S', SELECT is used to select eigenvalues to sort to the top left of the Schur form. If SORT = 'N', SELECT is not referenced. An eigenvalue WR(j)+sqrt(-1)*WI(j) is selected if SELECT(WR(j),WI(j)) is true; i.e., if either one of a complex conjugate pair of eigenvalues is selected, then both are. Note that a selected complex eigenvalue may no longer satisfy SELECT(WR(j),WI(j)) = .TRUE. after ordering, since ordering may change the value of complex eigenvalues (especially if the eigenvalue is ill-conditioned); in this case INFO may be set to N+3 (see INFO below). SENSE SENSE is CHARACTER*1 Determines which reciprocal condition numbers are computed. = 'N': None are computed; = 'E': Computed for average of selected eigenvalues only; = 'V': Computed for selected right invariant subspace only; = 'B': Computed for both. If SENSE = 'E', 'V' or 'B', SORT must equal 'S'. N N is INTEGER The order of the matrix A. N >= 0. A A is DOUBLE PRECISION array, dimension (LDA, N) On entry, the N-by-N matrix A. On exit, A is overwritten by its real Schur form T. LDA LDA is INTEGER The leading dimension of the array A. LDA >= max(1,N). SDIM SDIM is INTEGER If SORT = 'N', SDIM = 0. If SORT = 'S', SDIM = number of eigenvalues (after sorting) for which SELECT is true. (Complex conjugate pairs for which SELECT is true for either eigenvalue count as 2.) WR WR is DOUBLE PRECISION array, dimension (N) WI WI is DOUBLE PRECISION array, dimension (N) WR and WI contain the real and imaginary parts, respectively, of the computed eigenvalues, in the same order that they appear on the diagonal of the output Schur form T. Complex conjugate pairs of eigenvalues appear consecutively with the eigenvalue having the positive imaginary part first. VS VS is DOUBLE PRECISION array, dimension (LDVS,N) If JOBVS = 'V', VS contains the orthogonal matrix Z of Schur vectors. If JOBVS = 'N', VS is not referenced. LDVS LDVS is INTEGER The leading dimension of the array VS. LDVS >= 1, and if JOBVS = 'V', LDVS >= N. RCONDE RCONDE is DOUBLE PRECISION If SENSE = 'E' or 'B', RCONDE contains the reciprocal condition number for the average of the selected eigenvalues. Not referenced if SENSE = 'N' or 'V'. RCONDV RCONDV is DOUBLE PRECISION If SENSE = 'V' or 'B', RCONDV contains the reciprocal condition number for the selected right invariant subspace. Not referenced if SENSE = 'N' or 'E'. WORK WORK is DOUBLE PRECISION array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. LWORK LWORK is INTEGER The dimension of the array WORK. LWORK >= max(1,3*N). Also, if SENSE = 'E' or 'V' or 'B', LWORK >= N+2*SDIM*(N-SDIM), where SDIM is the number of selected eigenvalues computed by this routine. Note that N+2*SDIM*(N-SDIM) <= N+N*N/2. Note also that an error is only returned if LWORK < max(1,3*N), but if SENSE = 'E' or 'V' or 'B' this may not be large enough. For good performance, LWORK must generally be larger. If LWORK = -1, then a workspace query is assumed; the routine only calculates upper bounds on the optimal sizes of the arrays WORK and IWORK, returns these values as the first entries of the WORK and IWORK arrays, and no error messages related to LWORK or LIWORK are issued by XERBLA. IWORK IWORK is INTEGER array, dimension (MAX(1,LIWORK)) On exit, if INFO = 0, IWORK(1) returns the optimal LIWORK. LIWORK LIWORK is INTEGER The dimension of the array IWORK. LIWORK >= 1; if SENSE = 'V' or 'B', LIWORK >= SDIM*(N-SDIM). Note that SDIM*(N-SDIM) <= N*N/4. Note also that an error is only returned if LIWORK < 1, but if SENSE = 'V' or 'B' this may not be large enough. If LIWORK = -1, then a workspace query is assumed; the routine only calculates upper bounds on the optimal sizes of the arrays WORK and IWORK, returns these values as the first entries of the WORK and IWORK arrays, and no error messages related to LWORK or LIWORK are issued by XERBLA. BWORK BWORK is LOGICAL array, dimension (N) Not referenced if SORT = 'N'. INFO INFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal value. > 0: if INFO = i, and i is <= N: the QR algorithm failed to compute all the eigenvalues; elements 1:ILO-1 and i+1:N of WR and WI contain those eigenvalues which have converged; if JOBVS = 'V', VS contains the transformation which reduces A to its partially converged Schur form. = N+1: the eigenvalues could not be reordered because some eigenvalues were too close to separate (the problem is very ill-conditioned); = N+2: after reordering, roundoff changed values of some complex eigenvalues so that leading eigenvalues in the Schur form no longer satisfy SELECT=.TRUE. This could also be caused by underflow due to scaling. Author Univ. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd. subroutinesgeesx(characterjobvs,charactersort,externalselect,charactersense,integern,real,dimension(lda,*)a,integerlda,integersdim,real,dimension(*)wr,real,dimension(*)wi,real,dimension(ldvs,*)vs,integerldvs,realrconde,realrcondv,real,dimension(*)work,integerlwork,integer,dimension(*)iwork,integerliwork,logical,dimension(*)bwork,integerinfo)SGEESXcomputestheeigenvalues,theSchurform,and,optionally,thematrixofSchurvectorsforGEmatricesPurpose: SGEESX computes for an N-by-N real nonsymmetric matrix A, the eigenvalues, the real Schur form T, and, optionally, the matrix of Schur vectors Z. This gives the Schur factorization A = Z*T*(Z**T). Optionally, it also orders the eigenvalues on the diagonal of the real Schur form so that selected eigenvalues are at the top left; computes a reciprocal condition number for the average of the selected eigenvalues (RCONDE); and computes a reciprocal condition number for the right invariant subspace corresponding to the selected eigenvalues (RCONDV). The leading columns of Z form an orthonormal basis for this invariant subspace. For further explanation of the reciprocal condition numbers RCONDE and RCONDV, see Section 4.10 of the LAPACK Users' Guide (where these quantities are called s and sep respectively). A real matrix is in real Schur form if it is upper quasi-triangular with 1-by-1 and 2-by-2 blocks. 2-by-2 blocks will be standardized in the form [ a b ] [ c a ] where b*c < 0. The eigenvalues of such a block are a +- sqrt(bc). ParametersJOBVS JOBVS is CHARACTER*1 = 'N': Schur vectors are not computed; = 'V': Schur vectors are computed. SORT SORT is CHARACTER*1 Specifies whether or not to order the eigenvalues on the diagonal of the Schur form. = 'N': Eigenvalues are not ordered; = 'S': Eigenvalues are ordered (see SELECT). SELECT SELECT is a LOGICAL FUNCTION of two REAL arguments SELECT must be declared EXTERNAL in the calling subroutine. If SORT = 'S', SELECT is used to select eigenvalues to sort to the top left of the Schur form. If SORT = 'N', SELECT is not referenced. An eigenvalue WR(j)+sqrt(-1)*WI(j) is selected if SELECT(WR(j),WI(j)) is true; i.e., if either one of a complex conjugate pair of eigenvalues is selected, then both are. Note that a selected complex eigenvalue may no longer satisfy SELECT(WR(j),WI(j)) = .TRUE. after ordering, since ordering may change the value of complex eigenvalues (especially if the eigenvalue is ill-conditioned); in this case INFO may be set to N+3 (see INFO below). SENSE SENSE is CHARACTER*1 Determines which reciprocal condition numbers are computed. = 'N': None are computed; = 'E': Computed for average of selected eigenvalues only; = 'V': Computed for selected right invariant subspace only; = 'B': Computed for both. If SENSE = 'E', 'V' or 'B', SORT must equal 'S'. N N is INTEGER The order of the matrix A. N >= 0. A A is REAL array, dimension (LDA, N) On entry, the N-by-N matrix A. On exit, A is overwritten by its real Schur form T. LDA LDA is INTEGER The leading dimension of the array A. LDA >= max(1,N). SDIM SDIM is INTEGER If SORT = 'N', SDIM = 0. If SORT = 'S', SDIM = number of eigenvalues (after sorting) for which SELECT is true. (Complex conjugate pairs for which SELECT is true for either eigenvalue count as 2.) WR WR is REAL array, dimension (N) WI WI is REAL array, dimension (N) WR and WI contain the real and imaginary parts, respectively, of the computed eigenvalues, in the same order that they appear on the diagonal of the output Schur form T. Complex conjugate pairs of eigenvalues appear consecutively with the eigenvalue having the positive imaginary part first. VS VS is REAL array, dimension (LDVS,N) If JOBVS = 'V', VS contains the orthogonal matrix Z of Schur vectors. If JOBVS = 'N', VS is not referenced. LDVS LDVS is INTEGER The leading dimension of the array VS. LDVS >= 1, and if JOBVS = 'V', LDVS >= N. RCONDE RCONDE is REAL If SENSE = 'E' or 'B', RCONDE contains the reciprocal condition number for the average of the selected eigenvalues. Not referenced if SENSE = 'N' or 'V'. RCONDV RCONDV is REAL If SENSE = 'V' or 'B', RCONDV contains the reciprocal condition number for the selected right invariant subspace. Not referenced if SENSE = 'N' or 'E'. WORK WORK is REAL array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. LWORK LWORK is INTEGER The dimension of the array WORK. LWORK >= max(1,3*N). Also, if SENSE = 'E' or 'V' or 'B', LWORK >= N+2*SDIM*(N-SDIM), where SDIM is the number of selected eigenvalues computed by this routine. Note that N+2*SDIM*(N-SDIM) <= N+N*N/2. Note also that an error is only returned if LWORK < max(1,3*N), but if SENSE = 'E' or 'V' or 'B' this may not be large enough. For good performance, LWORK must generally be larger. If LWORK = -1, then a workspace query is assumed; the routine only calculates upper bounds on the optimal sizes of the arrays WORK and IWORK, returns these values as the first entries of the WORK and IWORK arrays, and no error messages related to LWORK or LIWORK are issued by XERBLA. IWORK IWORK is INTEGER array, dimension (MAX(1,LIWORK)) On exit, if INFO = 0, IWORK(1) returns the optimal LIWORK. LIWORK LIWORK is INTEGER The dimension of the array IWORK. LIWORK >= 1; if SENSE = 'V' or 'B', LIWORK >= SDIM*(N-SDIM). Note that SDIM*(N-SDIM) <= N*N/4. Note also that an error is only returned if LIWORK < 1, but if SENSE = 'V' or 'B' this may not be large enough. If LIWORK = -1, then a workspace query is assumed; the routine only calculates upper bounds on the optimal sizes of the arrays WORK and IWORK, returns these values as the first entries of the WORK and IWORK arrays, and no error messages related to LWORK or LIWORK are issued by XERBLA. BWORK BWORK is LOGICAL array, dimension (N) Not referenced if SORT = 'N'. INFO INFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal value. > 0: if INFO = i, and i is <= N: the QR algorithm failed to compute all the eigenvalues; elements 1:ILO-1 and i+1:N of WR and WI contain those eigenvalues which have converged; if JOBVS = 'V', VS contains the transformation which reduces A to its partially converged Schur form. = N+1: the eigenvalues could not be reordered because some eigenvalues were too close to separate (the problem is very ill-conditioned); = N+2: after reordering, roundoff changed values of some complex eigenvalues so that leading eigenvalues in the Schur form no longer satisfy SELECT=.TRUE. This could also be caused by underflow due to scaling. Author Univ. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd. subroutinezgeesx(characterjobvs,charactersort,externalselect,charactersense,integern,complex*16,dimension(lda,*)a,integerlda,integersdim,complex*16,dimension(*)w,complex*16,dimension(ldvs,*)vs,integerldvs,doubleprecisionrconde,doubleprecisionrcondv,complex*16,dimension(*)work,integerlwork,doubleprecision,dimension(*)rwork,logical,dimension(*)bwork,integerinfo)ZGEESXcomputestheeigenvalues,theSchurform,and,optionally,thematrixofSchurvectorsforGEmatricesPurpose: ZGEESX computes for an N-by-N complex nonsymmetric matrix A, the eigenvalues, the Schur form T, and, optionally, the matrix of Schur vectors Z. This gives the Schur factorization A = Z*T*(Z**H). Optionally, it also orders the eigenvalues on the diagonal of the Schur form so that selected eigenvalues are at the top left; computes a reciprocal condition number for the average of the selected eigenvalues (RCONDE); and computes a reciprocal condition number for the right invariant subspace corresponding to the selected eigenvalues (RCONDV). The leading columns of Z form an orthonormal basis for this invariant subspace. For further explanation of the reciprocal condition numbers RCONDE and RCONDV, see Section 4.10 of the LAPACK Users' Guide (where these quantities are called s and sep respectively). A complex matrix is in Schur form if it is upper triangular. ParametersJOBVS JOBVS is CHARACTER*1 = 'N': Schur vectors are not computed; = 'V': Schur vectors are computed. SORT SORT is CHARACTER*1 Specifies whether or not to order the eigenvalues on the diagonal of the Schur form. = 'N': Eigenvalues are not ordered; = 'S': Eigenvalues are ordered (see SELECT). SELECT SELECT is a LOGICAL FUNCTION of one COMPLEX*16 argument SELECT must be declared EXTERNAL in the calling subroutine. If SORT = 'S', SELECT is used to select eigenvalues to order to the top left of the Schur form. If SORT = 'N', SELECT is not referenced. An eigenvalue W(j) is selected if SELECT(W(j)) is true. SENSE SENSE is CHARACTER*1 Determines which reciprocal condition numbers are computed. = 'N': None are computed; = 'E': Computed for average of selected eigenvalues only; = 'V': Computed for selected right invariant subspace only; = 'B': Computed for both. If SENSE = 'E', 'V' or 'B', SORT must equal 'S'. N N is INTEGER The order of the matrix A. N >= 0. A A is COMPLEX*16 array, dimension (LDA, N) On entry, the N-by-N matrix A. On exit, A is overwritten by its Schur form T. LDA LDA is INTEGER The leading dimension of the array A. LDA >= max(1,N). SDIM SDIM is INTEGER If SORT = 'N', SDIM = 0. If SORT = 'S', SDIM = number of eigenvalues for which SELECT is true. W W is COMPLEX*16 array, dimension (N) W contains the computed eigenvalues, in the same order that they appear on the diagonal of the output Schur form T. VS VS is COMPLEX*16 array, dimension (LDVS,N) If JOBVS = 'V', VS contains the unitary matrix Z of Schur vectors. If JOBVS = 'N', VS is not referenced. LDVS LDVS is INTEGER The leading dimension of the array VS. LDVS >= 1, and if JOBVS = 'V', LDVS >= N. RCONDE RCONDE is DOUBLE PRECISION If SENSE = 'E' or 'B', RCONDE contains the reciprocal condition number for the average of the selected eigenvalues. Not referenced if SENSE = 'N' or 'V'. RCONDV RCONDV is DOUBLE PRECISION If SENSE = 'V' or 'B', RCONDV contains the reciprocal condition number for the selected right invariant subspace. Not referenced if SENSE = 'N' or 'E'. WORK WORK is COMPLEX*16 array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. LWORK LWORK is INTEGER The dimension of the array WORK. LWORK >= max(1,2*N). Also, if SENSE = 'E' or 'V' or 'B', LWORK >= 2*SDIM*(N-SDIM), where SDIM is the number of selected eigenvalues computed by this routine. Note that 2*SDIM*(N-SDIM) <= N*N/2. Note also that an error is only returned if LWORK < max(1,2*N), but if SENSE = 'E' or 'V' or 'B' this may not be large enough. For good performance, LWORK must generally be larger. If LWORK = -1, then a workspace query is assumed; the routine only calculates upper bound on the optimal size of the array WORK, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued by XERBLA. RWORK RWORK is DOUBLE PRECISION array, dimension (N) BWORK BWORK is LOGICAL array, dimension (N) Not referenced if SORT = 'N'. INFO INFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal value. > 0: if INFO = i, and i is <= N: the QR algorithm failed to compute all the eigenvalues; elements 1:ILO-1 and i+1:N of W contain those eigenvalues which have converged; if JOBVS = 'V', VS contains the transformation which reduces A to its partially converged Schur form. = N+1: the eigenvalues could not be reordered because some eigenvalues were too close to separate (the problem is very ill-conditioned); = N+2: after reordering, roundoff changed values of some complex eigenvalues so that leading eigenvalues in the Schur form no longer satisfy SELECT=.TRUE. This could also be caused by underflow due to scaling. Author Univ. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.

geesx - geesx: Schur form, expert

Functions subroutine cgeesx (jobvs, sort, select, sense, n, a, lda, sdim, w, vs, ldvs, rconde, rcondv, work, lwork, rwork, bwork, info) CGEESXcomputestheeigenvalues,theSchurform,and,optionally,thematrixofSchurvectorsforGEmatrices subroutine dgeesx (jobvs, sort, select, sense, n, a, lda, sdim, wr, wi, vs, ldvs, rconde, rcondv, work, lwork, iwork, liwork, bwork, info) DGEESXcomputestheeigenvalues,theSchurform,and,optionally,thematrixofSchurvectorsforGEmatrices subroutine sgeesx (jobvs, sort, select, sense, n, a, lda, sdim, wr, wi, vs, ldvs, rconde, rcondv, work, lwork, iwork, liwork, bwork, info) SGEESXcomputestheeigenvalues,theSchurform,and,optionally,thematrixofSchurvectorsforGEmatrices subroutine zgeesx (jobvs, sort, select, sense, n, a, lda, sdim, w, vs, ldvs, rconde, rcondv, work, lwork, rwork, bwork, info) ZGEESXcomputestheeigenvalues,theSchurform,and,optionally,thematrixofSchurvectorsforGEmatrices