latdf - latdf: Dif-estimate with complete pivoting LU, step in tgsen

Generated automatically by Doxygen for LAPACK from the source code. Version 3.12.0 Thu Aug 7 2025 17:26:25 latdf(3)

subroutineclatdf(integerijob,integern,complex,dimension(ldz,*)z,integerldz,complex,dimension(*)rhs,realrdsum,realrdscal,integer,dimension(*)ipiv,integer,dimension(*)jpiv)CLATDF uses the LU factorization of the n-by-n matrix computed by sgetc2 and computes a contribution to the reciprocal Dif-estimate. Purpose: CLATDF computes the contribution to the reciprocal Dif-estimate by solving for x in Z * x = b, where b is chosen such that the norm of x is as large as possible. It is assumed that LU decomposition of Z has been computed by CGETC2. On entry RHS = f holds the contribution from earlier solved sub-systems, and on return RHS = x. The factorization of Z returned by CGETC2 has the form Z = P * L * U * Q, where P and Q are permutation matrices. L is lower triangular with unit diagonal elements and U is upper triangular. ParametersIJOB IJOB is INTEGER IJOB = 2: First compute an approximative null-vector e of Z using CGECON, e is normalized and solve for Zx = +-e - f with the sign giving the greater value of 2-norm(x). About 5 times as expensive as Default. IJOB .ne. 2: Local look ahead strategy where all entries of the r.h.s. b is chosen as either +1 or -1. Default. N N is INTEGER The number of columns of the matrix Z. Z Z is COMPLEX array, dimension (LDZ, N) On entry, the LU part of the factorization of the n-by-n matrix Z computed by CGETC2: Z = P * L * U * Q LDZ LDZ is INTEGER The leading dimension of the array Z. LDA >= max(1, N). RHS RHS is COMPLEX array, dimension (N). On entry, RHS contains contributions from other subsystems. On exit, RHS contains the solution of the subsystem with entries according to the value of IJOB (see above). RDSUM RDSUM is REAL On entry, the sum of squares of computed contributions to the Dif-estimate under computation by CTGSYL, where the scaling factor RDSCAL (see below) has been factored out. On exit, the corresponding sum of squares updated with the contributions from the current sub-system. If TRANS = 'T' RDSUM is not touched. NOTE: RDSUM only makes sense when CTGSY2 is called by CTGSYL. RDSCAL RDSCAL is REAL On entry, scaling factor used to prevent overflow in RDSUM. On exit, RDSCAL is updated w.r.t. the current contributions in RDSUM. If TRANS = 'T', RDSCAL is not touched. NOTE: RDSCAL only makes sense when CTGSY2 is called by CTGSYL. IPIV IPIV is INTEGER array, dimension (N). The pivot indices; for 1 <= i <= N, row i of the matrix has been interchanged with row IPIV(i). JPIV JPIV is INTEGER array, dimension (N). The pivot indices; for 1 <= j <= N, column j of the matrix has been interchanged with column JPIV(j). Author Univ. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd. FurtherDetails: This routine is a further developed implementation of algorithm BSOLVE in [1] using complete pivoting in the LU factorization. Contributors: Bo Kagstrom and Peter Poromaa, Department of Computing Science, Umea University, S-901 87 Umea, Sweden. References: [1] Bo Kagstrom and Lars Westin, Generalized Schur Methods with Condition Estimators for Solving the Generalized Sylvester Equation, IEEE Transactions on Automatic Control, Vol. 34, No. 7, July 1989, pp 745-751. [2] Peter Poromaa, On Efficient and Robust Estimators for the Separation between two Regular Matrix Pairs with Applications in Condition Estimation. Report UMINF-95.05, Department of Computing Science, Umea University, S-901 87 Umea, Sweden, 1995. subroutinedlatdf(integerijob,integern,doubleprecision,dimension(ldz,*)z,integerldz,doubleprecision,dimension(*)rhs,doubleprecisionrdsum,doubleprecisionrdscal,integer,dimension(*)ipiv,integer,dimension(*)jpiv)DLATDF uses the LU factorization of the n-by-n matrix computed by sgetc2 and computes a contribution to the reciprocal Dif-estimate. Purpose: DLATDF uses the LU factorization of the n-by-n matrix Z computed by DGETC2 and computes a contribution to the reciprocal Dif-estimate by solving Z * x = b for x, and choosing the r.h.s. b such that the norm of x is as large as possible. On entry RHS = b holds the contribution from earlier solved sub-systems, and on return RHS = x. The factorization of Z returned by DGETC2 has the form Z = P*L*U*Q, where P and Q are permutation matrices. L is lower triangular with unit diagonal elements and U is upper triangular. ParametersIJOB IJOB is INTEGER IJOB = 2: First compute an approximative null-vector e of Z using DGECON, e is normalized and solve for Zx = +-e - f with the sign giving the greater value of 2-norm(x). About 5 times as expensive as Default. IJOB .ne. 2: Local look ahead strategy where all entries of the r.h.s. b is chosen as either +1 or -1 (Default). N N is INTEGER The number of columns of the matrix Z. Z Z is DOUBLE PRECISION array, dimension (LDZ, N) On entry, the LU part of the factorization of the n-by-n matrix Z computed by DGETC2: Z = P * L * U * Q LDZ LDZ is INTEGER The leading dimension of the array Z. LDA >= max(1, N). RHS RHS is DOUBLE PRECISION array, dimension (N) On entry, RHS contains contributions from other subsystems. On exit, RHS contains the solution of the subsystem with entries according to the value of IJOB (see above). RDSUM RDSUM is DOUBLE PRECISION On entry, the sum of squares of computed contributions to the Dif-estimate under computation by DTGSYL, where the scaling factor RDSCAL (see below) has been factored out. On exit, the corresponding sum of squares updated with the contributions from the current sub-system. If TRANS = 'T' RDSUM is not touched. NOTE: RDSUM only makes sense when DTGSY2 is called by STGSYL. RDSCAL RDSCAL is DOUBLE PRECISION On entry, scaling factor used to prevent overflow in RDSUM. On exit, RDSCAL is updated w.r.t. the current contributions in RDSUM. If TRANS = 'T', RDSCAL is not touched. NOTE: RDSCAL only makes sense when DTGSY2 is called by DTGSYL. IPIV IPIV is INTEGER array, dimension (N). The pivot indices; for 1 <= i <= N, row i of the matrix has been interchanged with row IPIV(i). JPIV JPIV is INTEGER array, dimension (N). The pivot indices; for 1 <= j <= N, column j of the matrix has been interchanged with column JPIV(j). Author Univ. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd. FurtherDetails: This routine is a further developed implementation of algorithm BSOLVE in [1] using complete pivoting in the LU factorization. Contributors: Bo Kagstrom and Peter Poromaa, Department of Computing Science, Umea University, S-901 87 Umea, Sweden. References: [1] Bo Kagstrom and Lars Westin, Generalized Schur Methods with Condition Estimators for Solving the Generalized Sylvester Equation, IEEE Transactions on Automatic Control, Vol. 34, No. 7, July 1989, pp 745-751. [2] Peter Poromaa, On Efficient and Robust Estimators for the Separation between two Regular Matrix Pairs with Applications in Condition Estimation. Report IMINF-95.05, Departement of Computing Science, Umea University, S-901 87 Umea, Sweden, 1995. subroutineslatdf(integerijob,integern,real,dimension(ldz,*)z,integerldz,real,dimension(*)rhs,realrdsum,realrdscal,integer,dimension(*)ipiv,integer,dimension(*)jpiv)SLATDF uses the LU factorization of the n-by-n matrix computed by sgetc2 and computes a contribution to the reciprocal Dif-estimate. Purpose: SLATDF uses the LU factorization of the n-by-n matrix Z computed by SGETC2 and computes a contribution to the reciprocal Dif-estimate by solving Z * x = b for x, and choosing the r.h.s. b such that the norm of x is as large as possible. On entry RHS = b holds the contribution from earlier solved sub-systems, and on return RHS = x. The factorization of Z returned by SGETC2 has the form Z = P*L*U*Q, where P and Q are permutation matrices. L is lower triangular with unit diagonal elements and U is upper triangular. ParametersIJOB IJOB is INTEGER IJOB = 2: First compute an approximative null-vector e of Z using SGECON, e is normalized and solve for Zx = +-e - f with the sign giving the greater value of 2-norm(x). About 5 times as expensive as Default. IJOB .ne. 2: Local look ahead strategy where all entries of the r.h.s. b is chosen as either +1 or -1 (Default). N N is INTEGER The number of columns of the matrix Z. Z Z is REAL array, dimension (LDZ, N) On entry, the LU part of the factorization of the n-by-n matrix Z computed by SGETC2: Z = P * L * U * Q LDZ LDZ is INTEGER The leading dimension of the array Z. LDA >= max(1, N). RHS RHS is REAL array, dimension N. On entry, RHS contains contributions from other subsystems. On exit, RHS contains the solution of the subsystem with entries according to the value of IJOB (see above). RDSUM RDSUM is REAL On entry, the sum of squares of computed contributions to the Dif-estimate under computation by STGSYL, where the scaling factor RDSCAL (see below) has been factored out. On exit, the corresponding sum of squares updated with the contributions from the current sub-system. If TRANS = 'T' RDSUM is not touched. NOTE: RDSUM only makes sense when STGSY2 is called by STGSYL. RDSCAL RDSCAL is REAL On entry, scaling factor used to prevent overflow in RDSUM. On exit, RDSCAL is updated w.r.t. the current contributions in RDSUM. If TRANS = 'T', RDSCAL is not touched. NOTE: RDSCAL only makes sense when STGSY2 is called by STGSYL. IPIV IPIV is INTEGER array, dimension (N). The pivot indices; for 1 <= i <= N, row i of the matrix has been interchanged with row IPIV(i). JPIV JPIV is INTEGER array, dimension (N). The pivot indices; for 1 <= j <= N, column j of the matrix has been interchanged with column JPIV(j). Author Univ. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd. FurtherDetails: This routine is a further developed implementation of algorithm BSOLVE in [1] using complete pivoting in the LU factorization. Contributors: Bo Kagstrom and Peter Poromaa, Department of Computing Science, Umea University, S-901 87 Umea, Sweden. References: [1] Bo Kagstrom and Lars Westin, Generalized Schur Methods with Condition Estimators for Solving the Generalized Sylvester Equation, IEEE Transactions on Automatic Control, Vol. 34, No. 7, July 1989, pp 745-751. [2] Peter Poromaa, On Efficient and Robust Estimators for the Separation between two Regular Matrix Pairs with Applications in Condition Estimation. Report IMINF-95.05, Departement of Computing Science, Umea University, S-901 87 Umea, Sweden, 1995. subroutinezlatdf(integerijob,integern,complex*16,dimension(ldz,*)z,integerldz,complex*16,dimension(*)rhs,doubleprecisionrdsum,doubleprecisionrdscal,integer,dimension(*)ipiv,integer,dimension(*)jpiv)ZLATDF uses the LU factorization of the n-by-n matrix computed by sgetc2 and computes a contribution to the reciprocal Dif-estimate. Purpose: ZLATDF computes the contribution to the reciprocal Dif-estimate by solving for x in Z * x = b, where b is chosen such that the norm of x is as large as possible. It is assumed that LU decomposition of Z has been computed by ZGETC2. On entry RHS = f holds the contribution from earlier solved sub-systems, and on return RHS = x. The factorization of Z returned by ZGETC2 has the form Z = P * L * U * Q, where P and Q are permutation matrices. L is lower triangular with unit diagonal elements and U is upper triangular. ParametersIJOB IJOB is INTEGER IJOB = 2: First compute an approximative null-vector e of Z using ZGECON, e is normalized and solve for Zx = +-e - f with the sign giving the greater value of 2-norm(x). About 5 times as expensive as Default. IJOB .ne. 2: Local look ahead strategy where all entries of the r.h.s. b is chosen as either +1 or -1. Default. N N is INTEGER The number of columns of the matrix Z. Z Z is COMPLEX*16 array, dimension (LDZ, N) On entry, the LU part of the factorization of the n-by-n matrix Z computed by ZGETC2: Z = P * L * U * Q LDZ LDZ is INTEGER The leading dimension of the array Z. LDA >= max(1, N). RHS RHS is COMPLEX*16 array, dimension (N). On entry, RHS contains contributions from other subsystems. On exit, RHS contains the solution of the subsystem with entries according to the value of IJOB (see above). RDSUM RDSUM is DOUBLE PRECISION On entry, the sum of squares of computed contributions to the Dif-estimate under computation by ZTGSYL, where the scaling factor RDSCAL (see below) has been factored out. On exit, the corresponding sum of squares updated with the contributions from the current sub-system. If TRANS = 'T' RDSUM is not touched. NOTE: RDSUM only makes sense when ZTGSY2 is called by CTGSYL. RDSCAL RDSCAL is DOUBLE PRECISION On entry, scaling factor used to prevent overflow in RDSUM. On exit, RDSCAL is updated w.r.t. the current contributions in RDSUM. If TRANS = 'T', RDSCAL is not touched. NOTE: RDSCAL only makes sense when ZTGSY2 is called by ZTGSYL. IPIV IPIV is INTEGER array, dimension (N). The pivot indices; for 1 <= i <= N, row i of the matrix has been interchanged with row IPIV(i). JPIV JPIV is INTEGER array, dimension (N). The pivot indices; for 1 <= j <= N, column j of the matrix has been interchanged with column JPIV(j). Author Univ. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd. FurtherDetails: This routine is a further developed implementation of algorithm BSOLVE in [1] using complete pivoting in the LU factorization. Contributors: Bo Kagstrom and Peter Poromaa, Department of Computing Science, Umea University, S-901 87 Umea, Sweden. References: [1] Bo Kagstrom and Lars Westin, Generalized Schur Methods with Condition Estimators for Solving the Generalized Sylvester Equation, IEEE Transactions on Automatic Control, Vol. 34, No. 7, July 1989, pp 745-751. [2] Peter Poromaa, On Efficient and Robust Estimators for the Separation between two Regular Matrix Pairs with Applications in Condition Estimation. Report UMINF-95.05, Department of Computing Science, Umea University, S-901 87 Umea, Sweden, 1995.

latdf - latdf: Dif-estimate with complete pivoting LU, step in tgsen

Functions subroutine clatdf (ijob, n, z, ldz, rhs, rdsum, rdscal, ipiv, jpiv) CLATDF uses the LU factorization of the n-by-n matrix computed by sgetc2 and computes a contribution to the reciprocal Dif-estimate. subroutine dlatdf (ijob, n, z, ldz, rhs, rdsum, rdscal, ipiv, jpiv) DLATDF uses the LU factorization of the n-by-n matrix computed by sgetc2 and computes a contribution to the reciprocal Dif-estimate. subroutine slatdf (ijob, n, z, ldz, rhs, rdsum, rdscal, ipiv, jpiv) SLATDF uses the LU factorization of the n-by-n matrix computed by sgetc2 and computes a contribution to the reciprocal Dif-estimate. subroutine zlatdf (ijob, n, z, ldz, rhs, rdsum, rdscal, ipiv, jpiv) ZLATDF uses the LU factorization of the n-by-n matrix computed by sgetc2 and computes a contribution to the reciprocal Dif-estimate.