snmp_pdus - Encode and Decode Functions for SNMP PDUs

       RFC1157, RFC1905 and/or RFC2272 should be studied carefully before using this module, snmp_pdus.

       The  module snmp_pdus contains functions for encoding and decoding of SNMP protocol data units (PDUs). In
       short, this module converts a list of bytes to Erlang record representations and vice versa.  The  record
       definitions  can  be  found  in  the file snmp/include/snmp_types.hrl. If snmpv3 is used, the module that
       includes snmp_types.hrl must define the constant SNMP_USE_V3 before the header file is included. Example:

       -define(SNMP_USE_V3, true).
       -include_lib("snmp/include/snmp_types.hrl").

       Encoding and decoding must be done explicitly when writing your own Net if process.

dec_message([byte()])->Message

              Types:

                 Message = #message

              Decodes  a  list  of  bytes  into  an  SNMP  Message.  Note,  if  there  is  a  v3  message,   the
              msgSecurityParameters  are  not  decoded.  They must be explicitly decoded by a call to a security
              model specific decoding function, e.g. dec_usm_security_parameters/1. Also note, if the  scopedPDU
              is encrypted, the OCTET STRING encoded encryptedPDU will be present in the data field.

       dec_message_only([byte()])->Message

              Types:

                 Message = #message

              Decodes  a  list  of bytes into an SNMP Message, but does not decode the data part of the Message.
              That means, data is still a list of bytes, normally an encoded PDU (v1 and V2) or an  encoded  and
              possibly encrypted scopedPDU (v3).

       dec_pdu([byte()])->Pdu

              Types:

                 Pdu = #pdu

              Decodes a list of bytes into an SNMP Pdu.

       dec_scoped_pdu([byte()])->ScopedPdu

              Types:

                 ScopedPdu = #scoped_pdu

              Decodes a list of bytes into an SNMP ScopedPdu.

       dec_scoped_pdu_data([byte()])->ScopedPduData

              Types:

                 ScopedPduData = #scoped_pdu | EncryptedPDU
                 EncryptedPDU = [byte()]

              Decodes a list of bytes into either a scoped pdu record, or - if the scoped pdu was encrypted - to
              a list of bytes.

       dec_usm_security_parameters([byte()])->UsmSecParams

              Types:

                 UsmSecParams = #usmSecurityParameters

              Decodes a list of bytes into an SNMP UsmSecurityParameters

       enc_message(Message)->[byte()]

              Types:

                 Message = #message

              Encodes a message record to a list of bytes.

       enc_message_only(Message)->[byte()]

              Types:

                 Message = #message

              Message is a record where the data field is assumed to be encoded (a list of bytes). If there is a
              v1  or  v2  message,  the  data  field is an encoded PDU, and if there is a v3 message, data is an
              encoded and possibly encrypted scopedPDU.

       enc_pdu(Pd)->[byte()]

              Types:

                 Pdu = #pdu

              Encodes an SNMP Pdu into a list of bytes.

       enc_scoped_pdu(ScopedPdu)->[byte()]

              Types:

                 ScopedPdu = #scoped_pdu

              Encodes an SNMP ScopedPdu into a list of bytes, which can  be  encrypted,  and  after  encryption,
              encoded  with  a  call  to  enc_encrypted_scoped_pdu/1;  or  it can be used as the data field in a
              message record, which then can be encoded with enc_message_only/1.

       enc_usm_security_parameters(UsmSecParams)->[byte()]

              Types:

                 UsmSecParams = #usmSecurityParameters

              Encodes SNMP UsmSecurityParameters into a list of bytes.

Ericsson AB                                         snmp 5.11                                    snmp_pdus(3erl)

       snmp_pdus - Encode and Decode Functions for SNMP PDUs