DUMP_FTS - dump InfiniBand forwarding tables

IraWeiny
              <  <ira.weiny@intel.com>  >

                                                   2013-03-26                                        DUMP_FTS(8)

       dump_fts  is  similar  to ibroute but dumps tables for every switch found in an ibnetdiscover scan of the
       subnet.

       The dump file format is compatible with loading into OpenSM  using  the  -R  file  -U  /path/to/dump-file
       syntax.

CONFIGFILE
       /etc/infiniband-diags/ibdiag.conf

       A  global  config  file is provided to set some of the common options for all tools.  See supplied config
       file for details.

   NODENAMEMAPFILEFORMAT
       The node name map is used to specify user friendly names for nodes in the  output.   GUIDs  are  used  to
       perform the lookup.

       This  functionality is provided by the opensm-libs package.  See opensm(8) for the file location for your
       installation.

       Generically:

          # comment
          <guid> "<name>"

       Example:

          # IB1
          # Line cards
          0x0008f104003f125c "IB1 (Rack 11 slot 1   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f125d "IB1 (Rack 11 slot 1   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10d2 "IB1 (Rack 11 slot 2   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10d3 "IB1 (Rack 11 slot 2   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10bf "IB1 (Rack 11 slot 12  ) ISR9288/ISR9096 Voltaire sLB-24D"

          # Spines
          0x0008f10400400e2d "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e2e "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e2f "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e31 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e32 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"

          # GUID   Node Name
          0x0008f10400411a08 "SW1  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f10400411a28 "SW2  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f10400411a34 "SW3  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f104004119d0 "SW4  (Rack  3) ISR9024 Voltaire 9024D"

       DUMP_FTS - dump InfiniBand forwarding tables

-a,--all
              show all lids in range, even invalid entries

       -n,--no_dests
              do not try to resolve destinations

       -M,--Multicast
              show multicast forwarding tables In this case, the range parameters are specifying the mlid range.

   PortSelectionflags-C,--Ca<ca_name>    use the specified ca_name.

       -P,--Port<ca_port>    use the specified ca_port.

   LocalportSelection
       Multiple  port/Multiple  CA  support:  when  no  IB  device  or  port  is  specified (see the "local umad
       parameters" below), the libibumad library selects the port to use by the following criteria:

          1. the first port that is ACTIVE.

          2. if not found, the first port that is UP (physical link up).

          If a port and/or CA name is specified, the libibumad library attempts to fulfill the user request, and
          will fail if it is not possible.

          For example:

              ibaddr                 # use the first port (criteria #1 above)
              ibaddr -C mthca1       # pick the best port from "mthca1" only.
              ibaddr -P 2            # use the second (active/up) port from the first available IB device.
              ibaddr -C mthca0 -P 2  # use the specified port only.

   Debuggingflags-d     raise the IB debugging level.  May be used several times (-ddd or -d -d -d).

       -e     show send and receive errors (timeouts and others)

       -h,--help      show the usage message

       -v,--verbose
              increase the application verbosity level.  May be used several times (-vv or -v -v -v)

       -V,--version     show the version info.

   Configurationflags-t,--timeout<timeout_ms> override the default timeout for the solicited mads.

       -y,--m_key<key>
              use the specified M_key for requests. If non-numeric value (like 'x') is specified  then  a  value
              will be prompted for.

       --node-name-map<node-name-map> Specify a node name map.
          This file maps GUIDs to more user friendly names.  See FILES section.

       --config,-z<config_file> Specify alternate config file.
          Default: /etc/infiniband-diags/ibdiag.conf

dump_lfts(8),dump_mfts(8),ibroute(8),ibswitches(8),opensm(8)

       dump_fts [options] [<startlid> [<endlid>]]