faxstate - control ``modem state'' of a device used by HylaFAX

faxstate  sends  a  message  to  the  HylaFAXfaxgetty(8)  process servicing modem telling it to use the
       specified state when notifying the HylaFAX scheduler that a modem is ready and available for  use.   This
       is useful for controlling outbound use of a modem; by marking a modem's state as busy or down the HylaFAX
       scheduler will not assign any outbound jobs to the modem.

       The  specified  modem can either be the name (typically the last component of the terminal port the modem
       is attached to), or the full name of the associated FIFO named pipe file, e.g. ``FIFO.ttym2''.

       If the -n option, faxstate emulates what faxgetty would do;  sending  a  message  directly  to  the  faxq
       process  marking  the  specified  modem  down,  busy,  or  ready.  This interface is useful for send-only
       environments in which faxgetty processes are not used.  Note that modems manipulated  in  this  way  must
       previously have been configured with the faxmodem(8) program.

       Consult hylafax-server(5) for a complete discussion of the structure and content of the spooling area.

       faxstate - control ``modem state'' of a device used by HylaFAX

       The following options are supported:

       -n        Contact faxq directly instead of faxgetty.

       -qdir    Use a spooling area other than /var/spool/hylafax.

       -s        Specify  the  state  to send the faxq process each time the modem becomes ready for use; one of
                 ``busy'', ``down'', and ``ready''.  The default state to use is ready.

hylafax-server(5), faxgetty(8)

                                                  July 17, 1995                                      FAXSTATE(8)

/usr/sbin/faxstate [ -qqueue-dir ] [ -sstate ] [ -n ] modem