tripplite - Driver for Tripp-Lite SmartPro UPS equipment

       •   Rickard E. (Rik) Faith

       •   Nicholas Kain

       This driver supports the following optional settings in the ups.conf(5):

       offdelay=num
           Time to wait before the UPS is turned off after the kill power command is sent. The default value is
           64 (in seconds).

       rebootdelay=num
           Set the timer before the UPS is cycled after the reboot command is sent. The default value is 64 (in
           seconds).

       startdelay=num
           Set the time that the UPS waits before it turns itself back on after a reboot command. The default
           value is 60 (in seconds).

       Battery charge information may not be correct for all UPSes. It is tuned to be correct for a SMART700SER.
       Other models may not provide correct information. Information from the manufacturer would be helpful.

       tripplite - Driver for Tripp-Lite SmartPro UPS equipment

       This man page only documents the hardware-specific features of the tripplite driver. For information
       about the core driver, see nutupsdrv(8).

Thecoredriver:nutupsdrv(8)

   OtherdriversforTripp-Litehardware:tripplitesu(8), tripplite_usb(8), usbhid-ups(8)

   Internetresources:
       The NUT (Network UPS Tools) home page: https://www.networkupstools.org/

Network UPS Tools 2.8.1                            01/16/2025                                       TRIPPLITE(8)

       This driver should work on the SmartPro line, including the SMART700 and SMART700SER. It only supports
       SmartPro models that communicate using the serial port.