vdev_id — generate user-friendly names for JBOD disks

vdev_id  is an udev helper which parses vdev_id.conf(5) to map a physical path in a storage topology to a
       channel name.  The channel name is combined with a disk enclosure slot number to  create  an  alias  that
       reflects  the  physical  location of the drive.  This is particularly helpful when it comes to tasks like
       replacing failed  drives.   Slot  numbers  may  also  be  remapped  in  case  the  default  numbering  is
       unsatisfactory.  The drive aliases will be created as symbolic links in /dev/disk/by-vdev.

       The  currently  supported topologies are sas_direct, sas_switch, and scsi.  A multipath mode is supported
       in which dm-mpath devices are handled by examining the first running component disk as  reported  by  the
       driver.   In multipath mode the configuration file should contain a channel definition with the same name
       for each path to a given enclosure.

       vdev_id also supports creating aliases based on existing udev links in the /dev hierarchy using the alias
       configuration file keyword.  See vdev_id.conf(5) for details.

       vdev_id — generate user-friendly names for JBOD disks

-ddevice
           The device node to classify, like /dev/sda.

       -cconfig_file
           Specifies the path to an alternate configuration file.  The default is /etc/zfs/vdev_id.conf.

       -gsas_direct|sas_switch|scsi
           Identifies a physical topology that governs how physical paths are mapped to channels:
           sas_direct and scsi  channels are uniquely identified by a PCI slot and HBA port number
           sas_switch           channels are uniquely identified by a SAS switch port number

       -m  Only handle dm-multipath devices.  If specified, examine the first running component disk  of  a  dm-
           multipath device as provided by the driver to determine the physical path.

       -pphys_per_port
           Specifies  the  number  of  PHY  devices  associated with a SAS HBA port or SAS switch port.  vdev_id
           internally uses this value to determine which HBA or switch port  a  device  is  connected  to.   The
           default is 4.

       -h  Print a usage summary.

vdev_id.conf(5)

OpenZFS                                           May 26, 2021                                        VDEV_ID(8)

vdev_id-ddev-cconfig_file-gsas_direct|sas_switch|scsi-m-pphys_per_port