alfred-gpsd - Alfred GPS distribution server

       alfred-gpsd and this Manual page was written by Andrew Lunn <andrew@lunn.ch>

Linux                                             Oct 04, 2013                                    ALFRED-GPSD(8)

       alfred-gpsd can be used to distribute GPS location information over your batman-adv mesh network. It
       reads the current location from gpsd, or a fixed location from the command line, and distributes this
       information via alfred. By gathering this local information, any alfred-gpsd node can get location
       information about other nodes.

       Start an alfred-gpsd server which is fetching GPS data from the local gpsd.
            alfred-gpsd-s

       Start an alfred-gpsd server with a fixed location
            alfred-gpsd-s-l48.858222,2.2945,358

       To get a list of GPS locations, in JSON format:
            alfred-gpsd
       [
         { "source" : "f6:00:48:13:d3:1e", "tpv" : {"class":"TPV","tag":"RMC",
           "device":"/dev/ttyACM0","mode":3,"time":"2013-10-01T10:43:20.000Z",
           "ept":0.005,"lat":52.575485000,"lon":-1.339716667,"alt":122.500,
           "epx":10.199,"epy":15.720,"epv":31.050,"track":0.0000,"speed":0.010,
           "climb":0.000,"eps":31.44} },
         { "source" : "8e:4c:77:b3:65:b4", "tpv" : {"class":"TPV",
           "device":"command line","time":"2013-10-01T10:43:05.129Z",
           "lat":48.858222,"lon":2.2945,"alt":358.000000,"mode":3}
         }
       ]

       alfred-gpsd - Alfred GPS distribution server

-v, --version
              Print the version

       -h, --help
              Display a brief help message.

       -u, --unix-pathpath
              path to unix socket used for alfred server communication.

       -s, --server
              Start up in server mode. This server will read the current location from gpsd and set it in alfred
              via unix socket. The alfred server must run too to get this information set.

       -l, --location<lat>,<lon>,<alt>
              Rather than read the current location from gpsd, use a fixed location.

       -g, --gpsdserver[:port[:device]]
              Specify the server hostname and optional port of where gpsd is listening. Additionally, a specific
              device connected to gpsd can be specified.

alfred(8), gpsd(8) gpsd_json(5)

alfred-gpsd[options]