tipc-bearer - show or modify TIPC bearers

       Richard Alpe <richard.alpe@ericsson.com>

iproute2                                           02 Jun 2015                                    TIPC-BEARER(8)

BeareridentificationmediaMEDIA
              Specifies the TIPC media type for a particular bearer to operate on.  Different media  types  have
              different  ways  of identifying a unique bearer.  For example, ib and eth identify a bearer with a
              DEVICE while udp identify a bearer with a LOCALIP and a NAMEib - Infiniband

              eth - Ethernet

              udp - User Datagram Protocol (UDP)

       nameNAME
              Logical bearer identifier valid for bearers on udp media.

       deviceDEVICE
              Physical bearer device valid for bearers on eth and ib media.

   Bearerpropertiesdomain
              The addressing domain (region) in which a bearer will establish links and  accept  link  establish
              requests.

       priority
              Default  link  priority  inherited  by  all links subsequently established over a bearer. A single
              bearer can only host one link to a particular node. This means the default  link  priority  for  a
              bearer typically affects which bearer to use when communicating with a particular node in an multi
              bearer setup. For more info about link priority see tipc-link(8)

       tolerance
              Default  link  tolerance  inherited  by all links subsequently established over a bearer. For more
              info about link tolerance see tipc-link(8)

       window
              Default link window inherited by all links subsequently established over a bearer. For  more  info
              about the link window size see tipc-link(8)

   UDPbeareroptionslocalipLOCALIP
              Specify a local IP v4/v6 address for a udp bearer.

       localportLOCALPORT
              Specify the local port for a udp bearer. The default port 6118 is used if no port is specified.

       remoteipREMOTEIP
              Specify  a remote IP for a udp bearer. If no remote IP is specified a udp bearer runs in multicast
              mode and tries to auto-discover its neighbours.  The multicast IP address is  generated  based  on
              the TIPC network ID. If a remote IP is specified the udp bearer runs in point-to-point mode.

              Multiple  remoteip  addresses  can be added via the beareradd command. Adding one or more unicast
              remoteip addresses to an existing udp bearer puts the bearer in replicast mode where IP  multicast
              is  emulated by sending multiple unicast messages to each configured remoteip.  When a peer sees a
              TIPC discovery message from an unknown peer  the  peer  address  is  automatically  added  to  the
              remoteip  (replicast)  list,  thus  only  one  side  of  a link needs to be manually configured. A
              remoteip address cannot be added to a multicast bearer.

       remoteportREMOTEPORT
              Specify the remote port for a udp bearer. The default port 6118 is used if no port is specified.

       Exit status is 0 if command was successful or a positive integer upon failure.

       tipc-bearer - show or modify TIPC bearers

       Options (flags) that can be passed anywhere in the command chain.

       -h, --help
              Show  help about last valid command. For example tipcbearer--help will show bearer help and tipc--help will show general help. The position of the option in the string is irrelevant.

       Report any bugs to the Network Developers mailing list <netdev@vger.kernel.org> where the development and
       maintenance is primarily done.  You do not have to be subscribed to the list to send a message there.

tipc(8), tipc-link(8), tipc-media(8), tipc-nametable(8), tipc-node(8), tipc-peer(8), tipc-socket(8)

tipcbeareraddmediaudpnameNAMEremoteipREMOTEIPtipcbearerenable [ domainDOMAIN ] [ priorityPRIORITY ] media
               { { eth | ib } deviceDEVICE } |
               { udpnameNAMElocalipLOCALIP [ localportLOCALPORT ] [ remoteipREMOTEIP ] [ remoteportREMOTEPORT ] }

       tipcbearerdisablemedia
               { { eth | ib } deviceDEVICE } |
               { udpnameNAME }

       tipcbearerset { priorityPRIORITY | toleranceTOLERANCE | windowWINDOW } media
               { { eth | ib } deviceDEVICE } |
               { udpnameNAME }

       tipcbearerget [ priority | tolerance | window ] media
               { { eth | ib } deviceDEVICE } |
               { udpnameNAME [ localip | localport | remoteip | remoteport ] }

       tipcbearerlist