-i specify network interface to use
-m show the menu asking for known MM types
-a destination MAC address to send frames to
-k network key to set
-v be verbose (default: no)
-e set error stream (default: stderr)
-o set output stream (default: stdout)
-s set input stream (default: stdin)
-h show the usage
HomePlugAVprotocol
The HomePlug AV protocol was developed by Intellon and specifies how the powerline PHY layer and
HPAV MAC layer can converge to allow Ethernet frames to be sent on the medium. It handles all the
low-level modulation and constellation building plus the Medium Access Control handling between
devices. The HomePlug AV network topology consists of one coordinator (called CCo) for a given
logical HPAV network (i.e: with the same Network Encryption Key) and none or several stations
(called STAs). Other devices can have a specific role which is a bridge, between several logical
networks.
------------------------------------
| HomePlug PHY |
------------------------------------
| HomePlug MAC convergence layer |
------------------------------------
| Ethernet MAC layer |
------------------------------------
It is possible to configure the HPAV MAC convergence layer by using specific Ethernet frames with
the 0x88e1 Ethertype. Such frames will be interpreted by the Intellon controller present in the
devices and are known as control or management frames.
Such frames can be either protocol specific (i.e: common to all HPAV implementations) or vendor
specific. There is no convention to specify whether an HPAV configuration and management frame is
vendor specific or not. Most implementations will share a common format for basic network
operations like setting the Network Management Key or the Encryption Key.
A HomePlug AV management frame is described below :
8 bits 16 bits
---------------------------------------------------
| MM version | MM type |
---------------------------------------------------
| OUI (24 bits) |
---------------------------------------------------
| Payload (var) |
---------------------------------------------------
The payload is highly dependent on the implementation though most vendors will try to define a
common template for it. Such management frame should be encapsulated in standard ethernet frames
with the 0x88e1 ethertype.
Faifaoperations
Faifa basically performs 3 main operations :
- send all vendor and protocol specific frames with the corresponding parameters
- dump all vendor and HomePlug 1.0/AV frames with the appropriate frame parsing
- discover the HPAV network topology
The available vendor specific operations are stored in an array of struct hpav_frame_ops. For each
entry the mmtype and the description is specified, with possible callbacks to handle frame
initialization and dump function.
Usingthefaifalibrary
Faifa is also provided as shared library (so file) and static library so that you can link
programs with to send HomePlug AV frames. The library allows you, specifying a given mmtype to
send the corresponding HPAV frame to a given device.
Linkingwithfaifa
You should include faifa.h into your C source file and then you can directly call functions that
are provided by the faifa library. When linking with the faifa library, make sure your linker
flags include "-lfaifa" or the absolute path of the shared object to make sure your program will
successfully link.
Sendingframesusingdo_frame
The main function you want to call is do_frame and pass it the MMtype and destination MAC address
you want to send the frame to. This function will :
- lookup the mmtype by reading the array containing available frame operations
- initialize the frame header (MM version, type, source and destination MAC addresses)
- call the initialisation function (if needed) to let the user input the parameters (or any other
input method)
- calculate the appropriate frame size
- send it to the device
- close the network socket descriptor
This function propagates the return code from the write command on the socket descriptor.
Receivingframesusingdo_receive_frame
This function will listen for received frames on the specified interface and will :
- check that the ethertype is set to 0x88e1 otherwise it will discard the frame
- cast the received packet to an HPAV management frame structure
- lookup for the received MM type into the arrays of known response/indications
- call the frame parsing function (based on the mmtype) accordingly
You will probably want to set the network descriptor in reading mode non-blocking. Faifa uses this
function with a call to a pcap_loop method inside a dedicated thread to receive all frames.
Install Now
PNG Icons
SVG Icons