aoe-interfaces - restrict aoe driver to specified network interfaces

       Ed L. Cashin (ecashin@coraid.com)

                                                                                               aoe-interfaces(8)

       The  aoe-interfaces command tells the aoe driver to ignore ATA over Ethernet (AoE) traffic on all but the
       specified network interfaces.  It is analogous to the aoe_iflist module load option.

       If neither the aoe_iflist module load option nor the aoe-interfaces command are used, the aoe driver will
       use any network interface for AoE traffic.  Using aoe-interfaces to limit AoE to  only  trusted  networks
       prevents  the  case  where  a  rogue  AoE  target  appears  on  a public network, diverting data from the
       legitimate AoE target.  Such an imposter target effectively corrupts the data on the legitimate target.

       If the aoe driver is a module, then calling aoe-interfaces without arguments  will  display  the  current
       interfaces list.  If it hasn't been set then the output will be blank.

       It's good to run the aoe-discover command after setting the AoE interfaces list.

       In  this example, the root user on a host named nai loads the aoe module with only eth0 allowable for AoE
       traffic.  After remembering that shelf 7 is on eth3, this sysadmin uses aoe-interfaces to add eth3 to the
       list of allowable network interfaces and then calls aoe-discover to ask the aoe driver to  look  for  new
       AoE devices.

              nai:~# modprobe aoe aoe_iflist="eth0"
              nai:~# aoe-stat
                 e10.9            eth0              up
              nai:~# aoe-interfaces eth0 eth3
              nai:~# aoe-discover
              nai:~# aoe-stat
                  e7.0            eth3              up
                  e7.1            eth3              up
                  e7.2            eth3              up
                  e7.3            eth3              up
                  e7.4            eth3              up
                  e7.5            eth3              up
                  e7.6            eth3              up
                  e7.7            eth3              up
                  e7.8            eth3              up
                  e7.9            eth3              up
                 e10.9            eth0              up
              nai:~# aoe-interfaces
              eth0 eth3

       aoe-interfaces - restrict aoe driver to specified network interfaces

-c     The -c flag will clear the interface access list, permitting any interface to be used.

aoe-discover(8), aoe-stat(8), aoetools(8).

aoe-interfaces[dev1][dev2...]aoe-interfaces-c