masterguard - Driver for Masterguard UPS equipment

       Michael Spanier <mail@michael-spanier.de>

CS
           Cancel the shutdown procedure.

       masterguard - Driver for Masterguard UPS equipment

       Please note that this driver is deprecated and will not receive new development. If it works for managing
       your devices — fine, but if you are running it to try setting up a new device, please consider the newer
       nutdrv_qx(8) instead, which should handle all Q* protocol variants for NUT.

       Please do also report if your device works with this driver, but nutdrv_qx(8) would not actually support
       it with any subdriver!

Newerdriver:nutdrv_qx(8)

   Thecoredriver:nutupsdrv(8)

   Internetresources:
       The NUT (Network UPS Tools) home page: https://www.networkupstools.org/historic/v2.8.3/

Network UPS Tools 2.8.3                            07/08/2025                                     MASTERGUARD(8)

       This driver supports Masterguard UPS equipment (serial connection only).

masterguard -h

       masterguard -a UPS_NAME [OPTIONS]

           Note

           This man page only documents the hardware-specific features of the masterguard driver. For
           information about the core driver, see nutupsdrv(8).