pyocd-tool - ARM Cortex-M programming tool

       2006-2013 ARM Limited

                                                       1""                                                    ()

pyocd-tool is an ARM Cortex-M programming tool

   Summary
       pyOCD  is an Open Source python based library for programming and debugging ARM Cortex-M microcontrollers
       using CMSIS-DAP.

       Includes support for flashing new binaries, resetting the device, halt, step,  resume  read/write  memory
       and set/remove breakpoints.

   Support
       Firmware  files  included  in the upstream source are NOT included in the Debian package due to a lack of
       source      code.      Target       files       can       be       downloaded       separately       from
       <https://github.com/mbedmicro/pyOCD/tree/master/binaries>

       Available  targets  for  use  with  --target  option: lpc824, kinetis, w7500, kv11z7, lpc4088qsb, kv10z7,
       k20d50m, ncs36510, kl28z, kl25z, k82f25615, k28f15, maxwsnenv, max32600mbed, k22fa12,  lpc4088,  lpc4330,
       ke18f16,  kl46z,  stm32f103rc,  kl82z7,  lpc54114,  kl43z4,  kl26z, lpc11xx_32, lpc800, rtl8195am, kl05z,
       lpc1768, kw41z4, lpc4088dm, stm32f051, cortex_m, lpc11u24, kl02z,  kw01z4,  k64f,  k22f,  ke15z7,  nrf51,
       nrf52, kl27z4, kw40z4, k66f18

   Usageusage:pyocd-tool[-h][--version][-H][-N][-kKHZ][-bID][-tTARGET]
              [-d LEVEL] [-da DAPARG [DAPARG ...]] [cmd] [args [args ...]]

       Target inspection utility

       positionalarguments:
              cmd                   Command args                  Arguments for the command.

       optional arguments:

          -h, --help
                 show this help message and exit
          — version             show program's version number and exit

          -H, --halt
                 Halt core upon connect.

          -N, --no-init
                 Do not init debug system.

          -kKHZ, --clockKHZ
                 Set SWD speed in kHz. (Default 1 MHz.)

          -bID, --boardID
                 Use the specified board.

          -tTARGET, --targetTARGET
                 Override target.

          -dLEVEL, --debugLEVEL
                 Set  the level of system logging output. Supported choices are: debug, info, warning, critical,
                 error

          -daDAPARG[DAPARG...],--dapargDAPARG[DAPARG...]
                 Send setting to DAPAccess layer.

       pyocd-tool - ARM Cortex-M programming tool