rtl-eeprom - EEPROM programming tool for RTL2832 based DVB-T receivers

       This manual page was written by Maitland Bottoms for the Debian project (but may be used by others).

       Copyright (c) 2013 A. Maitland Bottoms <bottoms@debian.org>

       This  program  is  free  software:  you  can  redistribute it and/or modify it under the terms of the GNU
       General Public License as published by the Free Software Foundation, either version 2 of the License,  or
       (at your option) any later version.

       This  program  is  distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even
       the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General  Public
       License for more details.

RTL-SDR                                               0.5.0                                        rtl_eeprom(1)

       Dumps  configuration and also writes EEPROM configuration.  Written by Steve Markgraf and incorporated in
       the osmocom rtl-sdr project.

       Use at your own risk, especially -w!

       Much software is available for the RTL2832. Most of the user-level packages rely on the librtlsdr library
       which comes as part of the rtl-sdr codebase. This codebase contains both the library itself  and  also  a
       number of command line tools such as rtl_test, rtl_sdr, rtl_tcp, and rtl_fm. These command line tools use
       the  library to test for the existence of RTL2832 devices and to perform basic data transfer functions to
       and from the device.

       Because most of the RTL2832 devices are connected using USB, the librtlsdr library depends on the  libusb
       library to communicate with the device.

       rtl-eeprom - EEPROM programming tool for RTL2832 based DVB-T receivers

       -d device_index (default: 0)

       -m <str> set manufacturer string

       -p <str> set product string

       -s <str> set serial number string

       -i <0,1> disable/enable IR-endpoint

       -g <conf> generate default config and write to device
                 <conf> can be one of:
                 realtek  Realtek default (as without EEPROM)
                 realtek_oem  Realtek default OEM with EEPROM
                 noxon  Terratec NOXON DAB Stick
                 terratec_black  Terratec T Stick Black
                 terratec_plus  Terratec T Stick+ (DVB-T/DAB)

       -w <filename> write dumped file to device

       -r <filename> dump EEPROM to file

       -h display this help text

       Use on your own risk, especially -w!

       RTL-SDR wiki documentation: http://sdr.osmocom.org/trac/wiki/rtl-sdr

       Other rtl-sdr programs:

       rtl_adsb(1), rtl_fm(1), rtl_sdr(1), rtl_tcp(1), rtl_test(1)

rtl_eeprom[OPTIONS]

       Writing bad information to the EEPROM will make your device useless.