Eclipse SUMO netconvert Version 1.18.0
Copyright (C) 2001-2023 German Aerospace Center (DLR) and others; https://sumo.dlr.de
Network importer / builder for the microscopic, multi-modal traffic simulation
SUMO.
ConfigurationOptions:-c, --configuration-file FILE
Loads the named config on startup
-C, --save-configuration FILE
Saves current configuration into FILE
--save-configuration.relative
Enforce relative paths when saving the configuration
--save-template FILE
Saves a configuration template (empty) into FILE
--save-schema FILE
Saves the configuration schema into FILE
--save-commented
Adds comments to saved template, configuration, or schema
InputOptions:-s, --sumo-net-file FILE
Read SUMO-net from FILE
-n, --node-files FILE
Read XML-node defs from FILE
-e, --edge-files FILE
Read XML-edge defs from FILE
-x, --connection-files FILE
Read XML-connection defs from FILE
-i, --tllogic-files FILE
Read XML-traffic light defs from FILE
-t, --type-files FILE
Read XML-type defs from FILE
--ptstop-files FILE
Reads public transport stops from FILE
--ptline-files FILE
Reads public transport lines from FILE
--polygon-files FILE
Reads polygons from FILE for embedding in network where applicable
--shapefile-prefix FILE
Read shapefiles (ArcView, Tiger, ...) from files starting with 'FILE'
--dlr-navteq-prefix FILE
Read converted Navteq GDF data (unsplitted Elmar-network) from path 'FILE'
--osm-files FILE
Read OSM-network from path 'FILE(s)'
--opendrive-files FILE
Read OpenDRIVE-network from FILE
--visum-file FILE
Read VISUM-net from FILE
--vissim-file FILE
Read VISSIM-net from FILE
--robocup-dir FILE
Read RoboCup-net from DIR
--matsim-files FILE
Read MATsim-net from FILE
--itsumo-files FILE
Read ITSUMO-net from FILE
--heightmap.shapefiles FILE
Read heightmap from ArcGIS shapefile
--heightmap.geotiff FILE
Read heightmap from GeoTIFF
OutputOptions:--write-license
Include license info into every output file
--output-prefix STR
Prefix which is applied to all output files. The special string 'TIME' is replaced by the current
time.
--precision INT
Defines the number of digits after the comma for floating point output
--precision.geo INT
Defines the number of digits after the comma for lon,lat output
-H, --human-readable-time
Write time values as hour:minute:second or day:hour:minute:second rather than seconds
-o, --output-file FILE
The generated net will be written to FILE
-p, --plain-output-prefix FILE
Prefix of files to write plain xml nodes, edges and connections to
--plain-output.lanes
Write all lanes and their attributes even when they are not customized
--junctions.join-output FILE
Writes information about joined junctions to FILE (can be loaded as additional node-file to
reproduce joins
--prefix STR
Defines a prefix for edge and junction names
--amitran-output FILE
The generated net will be written to FILE using Amitran format
--matsim-output FILE
The generated net will be written to FILE using MATsim format
--opendrive-output FILE
The generated net will be written to FILE using OpenDRIVE format
--dlr-navteq-output FILE
The generated net will be written to dlr-navteq files with the given PREFIX
--dlr-navteq.precision INT
The network coordinates are written with the specified level of output precision
--output.street-names
Street names will be included in the output (if available)
--output.original-names
Writes original names, if given, as parameter
--street-sign-output FILE
Writes street signs as POIs to FILE
--ptstop-output FILE
Writes public transport stops to FILE
--ptline-output FILE
Writes public transport lines to FILE
--ptline-clean-up
Clean-up pt stops that are not served by any line
--parking-output FILE
Writes parking areas to FILE
--railway.topology.output FILE
Analyze topology of the railway network
--polygon-output FILE
Write shapes that are embedded in the network input and that are not supported by polyconvert
(OpenDRIVE)
--opendrive-output.straight-threshold FLOAT
Builds parameterized curves whenever the angular change between straight segments exceeds FLOAT
degrees
--opendrive-output.lefthand-left
Write lanes in lefthand networks on the left side (positive indices)
--opendrive-output.shape-match-dist FLOAT
Match loaded shapes to the closest edge within FLOAT and export as road objects
ProjectionOptions:--simple-projection
Uses a simple method for projection
--proj.scale FLOAT
Scaling factor for input coordinates
--proj.rotate FLOAT
Rotation (clockwise degrees) for input coordinates
--proj.utm
Determine the UTM zone (for a universal transversal mercator projection based on the WGS84
ellipsoid)
--proj.dhdn
Determine the DHDN zone (for a transversal mercator projection based on the bessel ellipsoid,
"Gauss-Krueger")
--proj STR
Uses STR as proj.4 definition for projection
--proj.inverse
Inverses projection
--proj.dhdnutm
Convert from Gauss-Krueger to UTM
--proj.plain-geo
Write geo coordinates in plain-xml
ProcessingOptions:--speed-in-kmh
vmax is parsed as given in km/h
--construction-date STR
Use YYYY-MM-DD date to determine the readiness of features under construction
--flatten
Remove all z-data
--plain.extend-edge-shape
If edge shapes do not end at the node positions, extend them
--numerical-ids
Remaps alphanumerical IDs of nodes and edges to ensure that all IDs are integers
--numerical-ids.node-start INT
Remaps IDs of nodes to integers starting at INT
--numerical-ids.edge-start INT
Remaps IDs of edges to integers starting at INT
--reserved-ids FILE
Ensures that generated ids do not included any of the typed IDs from FILE (sumo-gui selection file
format)
--dismiss-vclasses
Removes vehicle class restrictions from imported edges
--geometry.split
Splits edges across geometry nodes
-R, --geometry.remove
Replace nodes which only define edge geometry by geometry points (joins edges)
--geometry.remove.keep-edges.explicit STR[]
Ensure that the given list of edges is not modified
--geometry.remove.keep-edges.input-file FILE
Ensure that the edges in FILE are not modified (Each id on a single line. Selection files from
sumo-gui are also supported)
--geometry.remove.keep-ptstops
Ensure that edges with public transport stops are not modified
--geometry.remove.min-length FLOAT
Allow merging edges with differing attributes when their length is below min-length
--geometry.remove.width-tolerance FLOAT
Allow merging edges with differing lane widths if the difference is below FLOAT
--geometry.remove.max-junction-size FLOAT
Prevent removal of junctions with a size above FLOAT as defined by custom edge endpoints
--geometry.max-segment-length FLOAT
splits geometry to restrict segment length
--geometry.min-dist FLOAT
reduces too similar geometry points
--geometry.max-angle FLOAT
Warn about edge geometries with an angle above DEGREES in successive segments
--geometry.min-radius FLOAT
Warn about edge geometries with a turning radius less than METERS at the start or end
--geometry.min-radius.fix
Straighten edge geometries to avoid turning radii less than geometry.min-radius
--geometry.min-radius.fix.railways
Straighten edge geometries to avoid turning radii less than geometry.min-radius (only railways)
--geometry.junction-mismatch-threshold FLOAT
Warn if the junction shape is to far away from the original node position
--geometry.check-overlap FLOAT
Warn if edges overlap by more than the given threshold value
--geometry.check-overlap.vertical-threshold FLOAT
Ignore overlapping edges if they are separated vertically by the given threshold.
--geometry.avoid-overlap
Modify edge geometries to avoid overlap at junctions
--join-lanes
join adjacent lanes that have the same permissions and which do not admit lane-changing (sidewalks
and disallowed lanes)
--ptline.match-dist FLOAT
Matches stops outside the road network to the referencing pt line when below the given distance
--ptstop-output.no-bidi
Skips automatic generation of stops on the bidi-edge of a loaded stop
--geometry.max-grade FLOAT
Warn about edge geometries with a grade in % above FLOAT.
--geometry.max-grade.fix
Smooth edge geometries with a grade above the warning threshold.
--offset.disable-normalization
Turn off normalizing node positions
--offset.x FLOAT
Adds FLOAT to net x-positions
--offset.y FLOAT
Adds FLOAT to net y-positions
--offset.z FLOAT
Adds FLOAT to net z-positions
--flip-y-axis
Flips the y-coordinate along zero
--roundabouts.guess
Enable roundabout-guessing
--roundabouts.visibility-distance FLOAT
Default visibility when approaching a roundabout
--opposites.guess
Enable guessing of opposite direction lanes usable for overtaking
--opposites.guess.fix-lengths
Ensure that opposite edges have the same length
--fringe.guess
Enable guessing of network fringe nodes
--fringe.guess.speed-threshold FLOAT
Guess disconnected edges above the given speed as outer fringe
--lefthand
Assumes left-hand traffic on the network
--edges.join
Merges edges which connect the same nodes and are close to each other (recommended for VISSIM
import)
--speed.offset FLOAT
Modifies all edge speeds by adding FLOAT
--speed.factor FLOAT
Modifies all edge speeds by multiplying by FLOAT
--speed.minimum FLOAT
Modifies all edge speeds to at least FLOAT
--edges.join-tram-dist FLOAT
Joins tram edges into road lanes with similar geometry (within FLOAT distance)
BuildingDefaultsOptions:-L, --default.lanenumber INT
The default number of lanes in an edge
--default.lanewidth FLOAT
The default width of lanes
--default.spreadtype STR
The default method for computing lane shapes from edge shapes
-S, --default.speed FLOAT
The default speed on an edge (in m/s)
--default.friction FLOAT
The default friction on an edge
-P, --default.priority INT
The default priority of an edge
--default.type STR
The default edge type
--default.sidewalk-width FLOAT
The default width of added sidewalks
--default.bikelane-width FLOAT
The default width of added bike lanes
--default.crossing-width FLOAT
The default width of a pedestrian crossing
--default.crossing-speed FLOAT
The default speed 'limit' on a pedestrian crossing (in m/s)
--default.walkingarea-speed FLOAT
The default speed 'limit' on a pedestrian walkingarea (in m/s)
--default.allow STR
The default for allowed vehicle classes
--default.disallow STR
The default for disallowed vehicle classes
--default.junctions.keep-clear
Whether junctions should be kept clear by default
--default.junctions.radius FLOAT
The default turning radius of intersections
--default.connection-length FLOAT
The default length when overriding connection lengths
--default.right-of-way STR
The default algorithm for computing right of way rules ('default', 'edgePriority')
TLSBuildingOptions:--tls.discard-loaded
Does not instatiate traffic lights loaded from other formats than plain-XML
--tls.discard-simple
Does not instatiate traffic lights at geometry-like nodes loaded from other formats than plain-XML
--tls.set STR[]
Interprets STR[] as list of junctions to be controlled by TLS
--tls.unset STR[]
Interprets STR[] as list of junctions to be not controlled by TLS
--tls.guess
Turns on TLS guessing
--tls.guess.threshold FLOAT
Sets minimum value for the sum of all incoming lane speeds when guessing TLS
--tls.taz-nodes
Sets district nodes as tls-controlled
--tls.guess.joining
Includes node clusters into guess
--tls.join
Tries to cluster tls-controlled nodes
--tls.join-dist FLOAT
Determines the maximal distance for joining traffic lights (defaults to 20)
--tls.join-exclude STR[]
Interprets STR[] as list of tls ids to exclude from joining
--tls.uncontrolled-within
Do not control edges that lie fully within a joined traffic light. This may cause collisions but
allows old traffic light plans to be used
--tls.ignore-internal-junction-jam
Do not build mutually conflicting response matrix, potentially ignoring vehicles that are stuck at
an internal junction when their phase has ended
--tls.guess-signals
Interprets tls nodes surrounding an intersection as signal positions for a larger TLS. This is
typical pattern for OSM-derived networks
--tls.guess-signals.dist FLOAT
Distance for interpreting nodes as signal locations
--tls.guess-signals.slack INT
Number of uncontrolled entry edges to accept and still consider the central node as a traffic
light
--tls.cycle.time INT
Use INT as cycle duration
--tls.green.time INT
Use INT as green phase duration
-D, --tls.yellow.min-decel FLOAT
Defines smallest vehicle deceleration
--tls.yellow.patch-small
Given yellow times are patched even if being too short
--tls.yellow.time INT
Set INT as fixed time for yellow phase durations
--tls.red.time INT
Set INT as fixed time for red phase duration at traffic lights that do not have a conflicting flow
--tls.allred.time INT
Set INT as fixed time for intermediate red phase after every switch
--tls.minor-left.max-speed FLOAT
Use FLOAT as threshold for allowing left-turning vehicles to move in the same phase as oncoming
straight-going vehicles
--tls.left-green.time INT
Use INT as green phase duration for left turns (s). Setting this value to 0 disables additional
left-turning phases
--tls.nema.vehExt INT
Set INT as fixed time for intermediate vehext phase after every switch
--tls.nema.yellow INT
Set INT as fixed time for intermediate NEMA yelow phase after every switch
--tls.nema.red INT
Set INT as fixed time for intermediate NEMA red phase after every switch
--tls.crossing-min.time INT
Use INT as minimum green duration for pedestrian crossings (s).
--tls.crossing-clearance.time INT
Use INT as clearance time for pedestrian crossings (s).
--tls.scramble.time INT
Use INT as green phase duration for pedestrian scramble phase (s).
--tls.half-offset STR[]
TLSs in STR[] will be shifted by half-phase
--tls.quarter-offset STR[]
TLSs in STR[] will be shifted by quarter-phase
--tls.default-type STR
TLSs with unspecified type will use STR as their algorithm
--tls.layout STR
Set phase layout four grouping opposite directions or grouping all movements for one incoming edge
['opposites', 'incoming']
--tls.no-mixed
Avoid phases with green and red signals for different connections from the same lane
--tls.min-dur INT
Default minimum phase duration for traffic lights with variable phase length
--tls.max-dur INT
Default maximum phase duration for traffic lights with variable phase length
--tls.group-signals
Assign the same tls link index to connections that share the same states
--tls.ungroup-signals
Assign a distinct tls link index to every connection
--tls.rebuild
rebuild all traffic light plans in the network
RampGuessingOptions:--ramps.guess
Enable ramp-guessing
--ramps.guess-acceleration-lanes
Guess on-ramps and mark acceleration lanes if they exist but do not add new lanes
--ramps.max-ramp-speed FLOAT
Treat edges with speed > FLOAT as no ramps
--ramps.min-highway-speed FLOAT
Treat edges with speed < FLOAT as no highways
--ramps.ramp-length FLOAT
Use FLOAT as ramp-length
--ramps.min-weave-length FLOAT
Use FLOAT as minimum ramp-length
--ramps.set STR[]
Tries to handle the given edges as ramps
--ramps.unset STR[]
Do not consider the given edges as ramps
--ramps.no-split
Avoids edge splitting
EdgeRemovalOptions:--keep-edges.min-speed FLOAT
Only keep edges with speed in meters/second > FLOAT
--remove-edges.explicit STR[]
Remove edges in STR[]
--keep-edges.explicit STR[]
Only keep edges in STR[] or those which are kept due to other keep-edges or remove-edges options
--keep-edges.input-file FILE
Only keep edges in FILE (Each id on a single line. Selection files from sumo-gui are also
supported) or those which are kept due to other keep-edges or remove-edges options
--remove-edges.input-file FILE
Remove edges in FILE. (Each id on a single line. Selection files from sumo-gui are also supported)
--keep-edges.postload
Remove edges after joining
--keep-edges.in-boundary STR[]
Only keep edges which are located within the given boundary (given either as CARTESIAN corner
coordinates <xmin,ymin,xmax,ymax> or as polygon <x0,y0,x1,y1,...>)
--keep-edges.in-geo-boundary STR[]
Only keep edges which are located within the given boundary (given either as GEODETIC corner
coordinates <lon-min,lat-min,lon-max,lat-max> or as polygon <lon0,lat0,lon1,lat1,...>)
--keep-edges.by-vclass STR[]
Only keep edges which allow one of the vclasses in STR[]
--remove-edges.by-vclass STR[]
Remove edges which allow only vclasses from STR[]
--keep-edges.by-type STR[]
Only keep edges where type is in STR[]
--keep-edges.components INT
Only keep the INT largest weakly connected components
--remove-edges.by-type STR[]
Remove edges where type is in STR[]
--remove-edges.isolated
Removes isolated edges
UnregulatedNodesOptions:--keep-nodes-unregulated
All nodes will be unregulated
--keep-nodes-unregulated.explicit STR[]
Do not regulate nodes in STR[]
--keep-nodes-unregulated.district-nodes
Do not regulate district nodes
JunctionsOptions:--junctions.right-before-left.speed-threshold FLOAT
Allow building right-before-left junctions when the incoming edge speeds are below FLOAT (m/s)
--junctions.left-before-right
Build left-before-right junctions instead of right-before-left junctions
--no-internal-links
Omits internal links
--no-turnarounds
Disables building turnarounds
--no-turnarounds.tls
Disables building turnarounds at tls-controlled junctions
--no-turnarounds.geometry
Disables building turnarounds at geometry-like junctions
--no-turnarounds.except-deadend
Disables building turnarounds except at dead end junctions
--no-turnarounds.except-turnlane
Disables building turnarounds except at at junctions with a dedicated turning lane
--no-turnarounds.fringe
Disables building turnarounds at fringe junctions
--no-left-connections
Disables building connections to left
--junctions.join
Joins junctions that are close to each other (recommended for OSM import)
--junctions.join-dist FLOAT
Determines the maximal distance for joining junctions (defaults to 10)
--junctions.join-exclude STR[]
Interprets STR[] as list of junctions to exclude from joining
--junctions.join-same
Joins junctions that have the same coordinates even if not connected
--max-join-ids INT
Abbreviate junction or TLS id if it joins more than INT junctions
--junctions.corner-detail INT
Generate INT intermediate points to smooth out intersection corners
--junctions.internal-link-detail INT
Generate INT intermediate points to smooth out lanes within the intersection
--junctions.scurve-stretch FLOAT
Generate longer intersections to allow for smooth s-curves when the number of lanes changes
--junctions.join-turns
Builds common edges for turning connections with common from- and to-edge. This causes
discrepancies between geometrical length and assigned length due to averaging but enables
lane-changing while turning
--junctions.limit-turn-speed FLOAT
Limits speed on junctions to an average lateral acceleration of at most FLOAT m/s^2)
--junctions.limit-turn-speed.min-angle FLOAT
Do not limit turn speed for angular changes below FLOAT (degrees). The value is subtracted from
the geometric angle before computing the turning radius.
--junctions.limit-turn-speed.min-angle.railway FLOAT
Do not limit turn speed for angular changes below FLOAT (degrees) on railway edges. The value is
subtracted from the geometric angle before computing the turning radius.
--junctions.limit-turn-speed.warn.straight FLOAT
Warn about turn speed limits that reduce the speed of straight connections by more than FLOAT
--junctions.limit-turn-speed.warn.turn FLOAT
Warn about turn speed limits that reduce the speed of turning connections (no u-turns) by more
than FLOAT
--junctions.small-radius FLOAT
Default radius for junctions that do not require wide vehicle turns
--junctions.higher-speed
Use maximum value of incoming and outgoing edge speed on junction instead of average
--junctions.minimal-shape
Build junctions with minimal shapes (igoring edge overlap)
--internal-junctions.vehicle-width FLOAT
Assumed vehicle width for computing internal junction positions
--rectangular-lane-cut
Forces rectangular cuts between lanes and intersections
--check-lane-foes.roundabout
Allow driving onto a multi-lane road if there are foes on other lanes (at roundabouts)
--check-lane-foes.all
Allow driving onto a multi-lane road if there are foes on other lanes (everywhere)
PedestrianOptions:--sidewalks.guess
Guess pedestrian sidewalks based on edge speed
--sidewalks.guess.max-speed FLOAT
Add sidewalks for edges with a speed equal or below the given limit
--sidewalks.guess.min-speed FLOAT
Add sidewalks for edges with a speed above the given limit
--sidewalks.guess.from-permissions
Add sidewalks for edges that allow pedestrians on any of their lanes regardless of speed
--sidewalks.guess.exclude STR[]
Do not guess sidewalks for the given list of edges
--crossings.guess
Guess pedestrian crossings based on the presence of sidewalks
--crossings.guess.speed-threshold FLOAT
At uncontrolled nodes, do not build crossings across edges with a speed above the threshold
--walkingareas
Always build walking areas even if there are no crossings
--walkingareas.join-dist FLOAT
Do not create a walkingarea between sidewalks that are connected by a pedestrian junction within
FLOAT
BicycleOptions:--bikelanes.guess
Guess bike lanes based on edge speed
--bikelanes.guess.max-speed FLOAT
Add bike lanes for edges with a speed equal or below the given limit
--bikelanes.guess.min-speed FLOAT
Add bike lanes for edges with a speed above the given limit
--bikelanes.guess.from-permissions
Add bike lanes for edges that allow bicycles on any of their lanes regardless of speed
--bikelanes.guess.exclude STR[]
Do not guess bikelanes for the given list of edges
RailwayOptions:--railway.signals.discard
Discard all railway signal information loaded from other formats than plain-xml
--railway.topology.repair
Repair topology of the railway network
--railway.topology.repair.minimal
Repair topology of the railway network just enough to let loaded public transport lines to work
--railway.topology.repair.connect-straight
Allow bidirectional rail use wherever rails with opposite directions meet at a straight angle
--railway.topology.repair.stop-turn
Add turn-around connections at all loaded stops.
--railway.topology.repair.bidi-penalty FLOAT
Penalty factor for adding new bidi edges to connect public transport stops
--railway.topology.all-bidi
Make all rails usable in both direction
--railway.topology.all-bidi.input-file FILE
Make all rails edge ids from FILE usable in both direction
--railway.topology.direction-priority
Set edge priority values based on estimated main direction
--railway.topology.extend-priority
Extend loaded edge priority values based on estimated main direction
--railway.signal.guess.by-stops
Guess signals that guard public transport stops
--railway.access-distance FLOAT
The search radius for finding suitable road accesses for rail stops
--railway.max-accesses INT
The maximum road accesses registered per rail stops
--railway.access-factor FLOAT
The walking length of the access is computed as air-line distance multiplied by FLOAT
FormatsOptions:--discard-params STR[]
Remove the list of keys from all params
--ignore-change-restrictions STR[]
List vehicle classes that may ignore lane changing restrictions ('all' discards all restrictions)
--osm.skip-duplicates-check
Skips the check for duplicate nodes and edges
--osm.elevation
Imports elevation data
--osm.layer-elevation FLOAT
Reconstruct (relative) elevation based on layer data. Each layer is raised by FLOAT m
--osm.layer-elevation.max-grade FLOAT
Maximum grade threshold in % at 50km/h when reconstrucing elevation based on layer data. The value
is scaled according to road speed.
--osm.oneway-spread-right
Whether one-way roads should be spread to the side instead of centered
--osm.lane-access
Import lane-specific access restrictions
--osm.bike-access
Import bike lanes and fix directions and permissions on bike paths
--osm.sidewalks
Import sidewalks
--osm.crossings
Import crossings
--osm.turn-lanes
Import turning arrows from OSM to help with connection building
--osm.stop-output.length FLOAT
The default length of a public transport stop in FLOAT m
--osm.stop-output.length.bus FLOAT
The default length of a bus stop in FLOAT m
--osm.stop-output.length.tram FLOAT
The default length of a tram stop in FLOAT m
--osm.stop-output.length.train FLOAT
The default length of a train stop in FLOAT m
--osm.all-attributes
Whether additional attributes shall be imported
--osm.extra-attributes STR[]
List of additional attributes that shall be imported from OSM via osm.all-attributes (set 'all' to
import all)
--osm.speedlimit-none FLOAT
The speed limit to be set when there is no actual speed limit in reality
--matsim.keep-length
The edge lengths given in the MATSIM-file will be kept
--matsim.lanes-from-capacity
The lane number will be computed from the capacity
--shapefile.street-id STR
Read edge ids from column STR
--shapefile.from-id STR
Read from-node ids from column STR
--shapefile.to-id STR
Read to-node ids from column STR
--shapefile.type-id STR
Read type ids from column STR
--shapefile.laneNumber STR
Read lane number from column STR
--shapefile.speed STR
Read speed from column STR
--shapefile.length STR
Read custom edge length from column STR
--shapefile.width STR
Read total edge width from column STR
--shapefile.name STR
Read (non-unique) name from column STR
--shapefile.node-join-dist FLOAT
Distance threshold for determining whether distinct shapes are connected (used when from-id and
to-id are not available)
--shapefile.add-params STR[]
Add the list of field names as edge params
--shapefile.use-defaults-on-failure
Uses edge type defaults on problems
--shapefile.all-bidirectional
Insert edges in both directions
--shapefile.guess-projection
Guess the proper projection
--shapefile.traditional-axis-mapping
Use traditional axis order (lon, lat)
--dlr-navteq.tolerant-permissions
Allow more vehicle classes by default
--dlr-navteq.keep-length
The edge lengths given in the DLR Navteq-file will be kept
--vissim.join-distance FLOAT
Structure join offset
--vissim.default-speed FLOAT
Use FLOAT as default speed
--vissim.speed-norm FLOAT
Factor for edge velocity
--vissim.report-unset-speeds
Writes lanes without an explicit speed set
--visum.language-file FILE
Load language mappings from FILE
--visum.use-type-priority
Uses priorities from types
--visum.use-type-laneno
Uses lane numbers from types
--visum.use-type-speed
Uses speeds from types
--visum.connector-speeds FLOAT
Sets connector speed
--visum.connectors-lane-number INT
Sets connector lane number
--visum.no-connectors
Excludes connectors
--visum.recompute-lane-number
Computes the number of lanes from the edges' capacities
--visum.verbose-warnings
Prints all warnings, some of which are due to VISUM misbehaviour
--visum.lanes-from-capacity.norm FLOAT
The factor for flow to no. lanes conversion
--opendrive.import-all-lanes
Imports all lane types
--opendrive.ignore-widths
Whether lane widths shall be ignored.
--opendrive.curve-resolution FLOAT
The geometry resolution in m when importing curved geometries as line segments.
--opendrive.advance-stopline FLOAT
Allow stop lines to be built beyond the start of the junction if the geometries allow so
--opendrive.min-width FLOAT
The minimum lane width for determining start or end of variable-width lanes
--opendrive.internal-shapes
Import internal lane shapes
--opendrive.position-ids
Sets edge-id based on road-id and offset in m (legacy)
--opendrive.lane-shapes
Use custom lane shapes to compensate discarded lane types
--opendrive.signal-groups
Use the OpenDRIVE controller information for the generated signal program
ReportOptions:-v, --verbose
Switches to verbose output
--print-options
Prints option values before processing
-?, --help
Prints this screen or selected topics
-V, --version
Prints the current version
-X, --xml-validation STR
Set schema validation scheme of XML inputs ("never", "local", "auto" or "always")
--xml-validation.net STR
Set schema validation scheme of SUMO network inputs ("never", "local", "auto" or "always")
-W, --no-warnings
Disables output of warnings
--aggregate-warnings INT
Aggregate warnings of the same type whenever more than INT occur
-l, --log FILE
Writes all messages to FILE (implies verbose)
--message-log FILE
Writes all non-error messages to FILE (implies verbose)
--error-log FILE
Writes all warnings and errors to FILE
--language STR
Language to use in messages
--ignore-errors
Continue on broken input
--ignore-errors.connections
Continue on invalid connections
--show-errors.connections-first-try
Show errors in connections at parsing
--ignore-errors.edge-type
Continue on unknown edge types
RandomNumberOptions:--random
Initialises the random number generator with the current system time
--seed INT
Initialises the random number generator with the given value
Install Now
PNG Icons
