airspyhf_rx - probe device and show configuration

       This manual page was written by Maitland Bottoms for the Debian project (but may be used by others).

       Copyright (c) 2020 A. Maitland Bottoms <bottoms@debian.org>

       This program is free software: you can redistribute it and/or modify  it  under  the  terms  of  the  GNU
       General  Public License as published by the Free Software Foundation, either version 2 of the License, or
       (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY  WARRANTY;  without  even
       the  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
       License for more details.

AIRSPYHF                                           2020.08.10                                     airspyhf_rx(1)

       The AirspyHF is a tiny and efficient software defined radio receiver.

       This application lets the user probe the device and show configuration.

       airspyhf_rx - probe device and show configuration

       Usage:

       -r <filename>
              Receive data into the file; stdout emits values on standard output

       -s <serial number>
              Open device with specified 64bits serial number

       -f <frequency>
              Set frequency in MHz between 9 kHz - 31 MHz or 60 - 260 MHz

       -a <sample_rate>
              Set sample rate, at the moment only 768 kS/s supported

       -n <#samples>
              Number of samples to transfer (default is unlimited)

       -d     Verbose mode

       -w     Receive  data  into file with WAV header and automatic name This is for SDR# compatibility and may
              not work with other software It works even with HDSDR

       -g on|off
              HF AGC on / off

       -l high|low
              HF AGC threshold high / low (when AGC On)

       -t <value>
              HF attenuator value 0..8 (each step increases 6 dB the attenuation)

       -m on|off
              on to activate LNA (preamplifier): +6 dB gain - compensated in digital.

       -z     Do not attempt to use manual AGC/LNA commands (useful in order to avoid errors with old firmware)

       AirspyHF web page: https://airspy.com/airspy-hf-plus

       Other airspyhf programs:

       airspyhf_rx(1), airspyhf_gpio(1), airspyhf_lib_version(1), airspyhf_rx(1)

airspy_rx