ao-send-telem - Re-transmit stored telemetry file

       Keith Packard

                                                  ao-send-telem                                 AO-SEND-TELEM(1)

ao-send-telem reads the specified flight telemetry log and  re-transmits  it  via  the  specified  ground
       station device

       ao-send-telem - Re-transmit stored telemetry file

       -T tty-device | --tty tty-device
              This selects which tty device ao-dumplog uses to communicate with the target device.

       -D AltOS-device | --device AltOS-device
              Search for a connected device. This requires an argument of one of the following forms:

              TeleDongle:2
              TeleDongle
              2

              Leaving out the product name will cause the tool to select a suitable  product,  leaving  out  the
              serial number will cause the tool to match one of the available devices.

       -F kHz | --frequency kHz
              This selects which frequency to send the specified packets on.

       -R | --realtime
              This  makes  the program delay between packets in pad mode. Normally, pad mode packets are sent as
              quickly as possible.

ao-send-telem  [-T tty-device] [--tty tty-device] [-D altos-device] [--device altos-device] [-F frequency(kHz)] [--frequency frequency(kHz)] [-R] [--realtime] <flight.telem>