cnetz_sim - http://osmocom-analog.eversberg.eu/docs/

cnetz_sim - http://osmocom-analog.eversberg.eu/docs/

       The full documentation for [0;33m[1;32mDOPTIONS[0;m[0;33m is maintained as a Texinfo manual.  If the info
       and [0;33m[1;32mDOPTIONS[0;m[0;33m programs are properly installed at your site, the command

              info[0;33m[1;32mDOPTIONS[0;m[0;33m

       should give you access to the complete manual.

                                                                                                    cnetz_sim(1)

cnetz_sim [options] <command>Generaloptions:-h--help

              This help

       --config [~/]<path to config file>

              Give  a config file to use. If it starts with '~/', path is at home dir.  Each line in config file
              is one option, '-' or '--' must not be given!

       -v--verbose <level> | <level>,<category>[,<category>[,...]] | list

              Use 'list' to get a list of all levels and  categories.   Verbose  level:  digit  of  debug  level
              (default  =  '3')  Verbose level+category: level digit followed by one or more categories -> If no
              category is specified, all categories are selected

       -v--verbose date

              Show date with debug output

       -s--serial-device <device>

              Serial device (default = '/dev/ttyUSB0')

       -b--baud-rate <baud>

              Serial baud rate (default = 9600)

       -w--write-pdu <filename>

              Write PDU to file (sniffer only)

   SIMcardsimulatoroptions:-E--eeprom <name>

              Stores    and    reads    EEPROM    data    to/from    file.    The    file    is    stored     at
              "~/osmocom/analog/sim_<name>.eeprom".  If  the file dos not exit yet, the default values are used.
              Values are always overwritten with card data, if defined.

       -F--futln <phone number>

              Give 7 digits subscriber ID (default = '2222001')

       --sicherung <security code>

              Card's security code for simple authentication (default = '3103')

       --kartenkennung <card ID>

              Card's ID. Not relevant! (default = '3')

       --sonder <special code>

              Special codes are used for service cards (default = '0')

       --wartung <maitenance code>

              May define features of service cards (default = '65535')

       -P--pin <pin> | 0000

              Give 4 .. 8 digits of pin. Use '0000' to disable. (default = '0000') This will also reset the  PIN
              error counter and unlocks the card.

       -D--directory <location> <number> <name> [--directory ...]

              Give  storage location '01' .. '80'. To erase give "" as number and name. This option can be given
              multiple times for more entries.

       -A--authenticate 0x...

              Give 64 Bit value for authentication response. (default = all bits 1)

   Commandsare:
              sniff - To passively sniff SIM card communication sim - To simulate a SIM card

       [0;33m[1;31mDOPTIONS[0;m[0;33m [1;31mERROR[0;m[0;33m options.c:302 Given command line option  '--version'
       is not a valid option, use '-h' for help![0;m