foo2lava-wrapper - Convert Postscript into a LAVAFLOW or OPL printer stream

       Rick Richardson <rick.richardson@comcast.net>
       http://foo2zjs.rkkda.com/

NormalOptions
       These are the options used to select the parameters of a print job that are usually controlled on  a  per
       job basis.

       -c     Print in color (else monochrome).

       -Ccolormode
              Color correction mode [0].
               1   Photos (using m2300w CRDs)
               2   Photos and text (using m2300w CRDs)
               3   Graphics and text (using m2300w CRDs)
              10   ICM color profile (using -G *.icm file)

       -dduplex
              Duplex code to send to printer [1].
              │         │               │
              │ 1   off │ 2   long edge │ 3   short edge

       -mmedia
              Media code to send to printer [0].
              ──────────────────────────
              Media          2530DL
              ──────────────────────────
              plain             0
              transparency      4
              thick stock      20
              envelope         22
              letterhead       23
              postcard         25
              labels           26
              recycled         27

       -ppaper
              Paper size code to send to printer [2].
              ┌───────────────────┬─────────────────────┐
              │   1   executive   │  25   A5            │
              │   2   letter      │  26   A4            │
              │   3   legal       │  45   B5jis         │
              │  80   env Monarch │  65   B5iso         │
              │  81   env #10     │  90   env DL        │
              │  91   env C5      │  92   env B5        │
              │ 835   4x6" photo  │ 837   10x15cm photo │
              └───────────────────┴─────────────────────┘

       -ncopies
              Number of copies [1].

       -rxresxyres
              Set device resolution in pixels/inch [1200x600].

       -ssource
              Source (Input Slot) code to send to printer [255].
              │            │
              │ 1   Tray 1 │ 255   auto
              │ 4   Tray 2 │

       -t     Draft mode.  Every other pixel is white.

       -2-3-4-5-6-8-9-10-12-14-15-16-18
              Print in N-up.  Requires the psutils package.

       -oorient
              Orientation used for N-up.
              Portrait    -op   (normal)
              Landscape   -ol   (rotated 90 degrees anticlockwise)
              Seascape    -os   (rotated 90 degrees clockwise)

   PrinterTweakingOptions
       These are the options used to customize the operation of foo2lava for a particular printer.

       -uxoffxyoff
              Set  the offset of the start of the printable region from the upper left corner, in pixels [varies
              with paper size].  The defaults should work on the 2200DL and 2300DL, and have not been tested  on
              any other printers.

       -lxoffxyoff
              Set  the  offset of the end of the printable region from the lower right corner, in pixels [varies
              with paper size].  The defaults should work on the 2200DL and 2300DL, and have not been tested  on
              any other printers.

       -Lmask
              Send  the logical clipping values from -u/-l in the LAVAFLOW stream.  foo2lava-wrapper always runs
              Ghostscript with the ideal page dimensions, so that the scale of the image is correct,  regardless
              whether  or  not the printer has unprintable regions.  This option is used to move the position of
              the clipped image back to where it belongs on the page.  The default is to send the  amount  which
              was clipped by -u and -l, and should be good in most cases.
              0   don't send any logical clipping amounts
              1   only send Y clipping amount
              2   only send X clipping amount
              3   send both X and Y clipping amounts

       -zmodel
              Model.  The  default is [0].
              model   protocol   Description
              0       LAVAFLOW   magicolor 2490 MF
              0       LAVAFLOW   magicolor 2530 DL
              1       OPL        magicolor 2480 MF
              2       LAVAFLOW   magicolor 1600W
              2       LAVAFLOW   magicolor 1680MF
              2       LAVAFLOW   magicolor 1690MF

   ColorTweakingOptions
       These  are the options used to control the quality of color output.  Color correction is currently a WORK
       IN PROGRESS.

       -ggsopts
              Additional options to pass to Ghostscript, such as  -g“-dDITHERPPI=nnn”,  etc.   This  option  may
              appear more than once.

       -Gprofile.icm
              Convert  profile.icm  to  a  Postscript  color rendering dictionary (CRD) using foo2zjs-icc2ps and
              adjust the printer colors by using the Postscript setcolorrendering operator.  (WORK IN PROGRESS).

       -Ggamma-file.ps
              Prepend  gamma-file.ps  to  the  Postscript  input  to  perform   color   correction   using   the
              setcolortransfer Postscript operator.  For example, the file might contain:
              {0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer

       -Iintent
              Select  profile intent from the ICM file.  0=Perceptual, 1=Colorimetric, 2=Saturation, 3=Absolute.
              Default is 0 (perceptual).

   DebuggingOptions
       These options are used for debugging foo2lava and its wrapper.

       -Splane
              Output just a single color plane from a color print and print it on the black plane.  The  default
              is to output all color planes.
              1   Cyan
              2   Magenta
              3   Yellow
              4   Black

       -Dlevel
              Set Debug level [0].

foo2lava-wrapper  is  a Foomatic compatible printer wrapper for the foo2lava printer driver.  This script
       reads a Postscript ps-file or standard input and converts it to Zenographics LAVAFLOW printer format  for
       driving   the  Konica  Minolta  magicolor  1600W  color  laser  printer,  the  Konica  Minolta  magicolor
       1680MF/1690MF AIO printer, the Konica Minolta magicolor 2480/2490 MF  AIO  printer,  the  Konica  Minolta
       magicolor 2530 DL network color laser printer, and other Zenographics-based LAVAFLOW printers.

       This  script  can  be  used  in a standalone fashion, but is intended to be called from a printer spooler
       system which uses the Foomatic printer database.

       Create a monochrome LAVAFLOW stream from a Postscript document, examine it, and then print it using a RAW
       print queue:

              foo2lava-wrapper testpage.ps > testpage.zm
              lavadecode < testpage.zm
              lpr -P raw testpage.zm

       Create a color LAVAFLOW stream from a Postscript document:

              foo2lava-wrapper -c testpage.ps > testpage.zc

/usr/bin/foo2lava-wrapper

       foo2lava-wrapper - Convert Postscript into a LAVAFLOW or OPL printer stream

foo2lava(1), lavadecode(1) opldecode(1)

foo2lava-wrapper [options] [ps-file]