foo2xqx - Convert Ghostscript pbmraw into a XQX printer stream

       Rick Richardson <rick.richardson@comcast.net>
       http://foo2xqx.rkkda.com/

NormalOptions
       These are the options used to select the parameters of a print job that are usually controlled on  a  per
       job basis.

       -dduplex
              Duplex code to send to printer [1].
              │         │               │
              │ 1   off │ 2   long edge │ 3   short edge

       -gxpixxypix
              Set page dimensions in pixels [10200x6600].

       -mmedia
              Media code to send to printer [1].
              ─────────────────────────
              Media          M1005
              ─────────────────────────
              standard          1
              transparency      2
              envelope        257
              letterhead      259
              thick           261
              postcard        262
              labels          263

       -ppaper
              Paper code to send to printer [1].
              ┌───────────────────┬───────────────────┐
              │   1   letter      │   9   A4          │
              │   5   legal       │  11   A5          │
              │   7   executive   │  13   B5          │
              │  20   env #10     │  27   env DL      │
              │  28   env C5      │  34   env B5      │
              │  37   env Monarch │ 257   16k 197x273 │
              │ 263   16k 184x260 │ 264   16k 195x270 │
              └───────────────────┴───────────────────┘

       -ncopies
              Number of copies [1].

       -rxresxyres
              Set device resolution in pixels/inch [1200x600].

       -ssource
              Source (InputSlot) code to send to printer [7].
              ┌───────────┬────────────┐
              │ 1   upper │ 4   manual │
              │ 2   lower │ 7   auto   │
              └───────────┴────────────┘

       -t     Draft mode.  Every other pixel is white.

       -Tdensity
              Print density (1-5).  The default is 3 (medium).

       -Jfilename
              Filename string to send to printer.

       -Uusername
              Username string to send to printer.

   PrinterTweakingOptions
       These are the options used to customize the operation of foo2xqx for a particular printer.

       -uxoffxyoff
              Set the offset of the start of the printable region from the upper left corner, in pixels [0x0].

       -lxoffxyoff
              Set the offset of the end of the printable region from the lower right corner, in pixels [0x0].

       -Lmask
              Send logical clipping amounts implied by -u/-l in the ZjStream [3].
              0   don't send any logical clipping amounts
              1   only send Y clipping amount
              2   only send X clipping amount
              3   send both X and Y clipping amounts

       -A     AllIsBlack: convert C=1,M=1,Y=1 to just K=1.  Works with bitcmyk input only.

       -B     BlackClears: K=1 forces C,M,Y to 0.  Works with bitcmyk input only.

   DebuggingOptions
       These options are used for debugging foo2xqx.

       -Splane
              Output  just a single color plane from a color print and print it on the black plane.  The default
              is to output all color planes.
              1   Cyan
              2   Magenta
              3   Yellow
              4   Black

       -Dlevel
              Set Debug level [0].

foo2xqx   converts   Ghostscript   pbmraw  to  monochrome  XQX  streams,  for  driving  the  HP  LaserJet
       P1005/P1006/P1007/P1008, the HP LaserJet P1505, the HP LaserJet P2014, the HP LaserJet M1005 MFP, the  HP
       LaserJet  M1120 MFP, the HP LaserJet Pro M1132s MFP, the HP LaserJet Pro M1212nf MFP, and other XQX-based
       printers.

       Create a black and white XQX stream:

              gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
                  -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw
                  -sOutputFile=- - < testpage.ps
              | foo2xqx -r1200x600 -g10200x6600 -p1 >testpage.zm

/usr/bin/foo2xqx

       foo2xqx - Convert Ghostscript pbmraw into a XQX printer stream

foo2xqx-wrapper(1), xqxdecode(1)

foo2xqx [options] <pbmraw-file >xqx-file