NormalOptions
These are the options used to select the parameters of a print job that are usually controlled on a per
job basis.
-c Print in color (else monochrome).
-Ccolormode
Color correction mode [0].
1 Photos (using m2300w CRDs)
2 Photos and text (using m2300w CRDs)
3 Graphics and text (using m2300w CRDs)
10 ICM color profile (using -G *.icm file)
-dduplex
Duplex code to send to printer [1].
│ │ │
│ 1 off │ 2 long edge │ 3 short edge
-mmedia
Media code to send to printer [1].
──────────────────────────────────────────────────────────────
2300DL 2200DL HP 1018 HP P1102 HP
Media HP 1005 HP 1020 HP P1606 CP1025
-z0 -z0 -z1 -z2 -z3
──────────────────────────────────────────────────────────────
standard 1 1 1 1 1
transparency 2 2 2 2 2
envelope 257 na 267 267 267
letterhead 259 na 513 513 513
bond na na 260 260 260
thick 261 4 261 na na
postcard 262 na na na na
rough na na 263 263 263
heavy na na 262 262 262
labels 263 3 263 265 265
vellum na na 273 273 273
medium na na na 282 282
extraheavy na na na 283 283
color na na 512 512 512
light na na 258 258 258
preprinted na na 514 514 514
prepunched na na 515 515 515
recycled na na 516 516 516
-ppaper
Paper size code to send to printer [1].
───────────────────────────────────────────────────────────
MC 2300DL HP 1018 HP P1102 HP
HP 1005 HP 1020 HP P1606 CP1025
-z0 -z1 -z2 -z3
Paper
───────────────────────────────────────────────────────────
letter 1 1 1 1
legal 5 5 5 5
executive 7 7 7 7
A4 9 9 9 9
A5 11 11 11 11
B5jis 13 13 13 13
env #10 20 20 20 20
env DL 27 27 27 27
env CL 28 28 28 28
env B5 34 34 34 34
env Monarch 37 37 37 37
postcard (japan) na 260 43 43
B5iso na 259 na na
A6 na 262 70 70
double postcard na 261 82 82
rotated
16k 197x273 na 257 257 257
fanfold german na 258 258 258
legal
16k 184x260 na na 263 263
16k 195x270 na na 264 264
photo 4x6 na na na 268
photo 5x8 na na na 269
photo 10x15 na na na 270
-ncopies
Number of copies [1].
-rxresxyres
Set device resolution in pixels/inch [1200x600].
-ssource
Source (Input Slot) code to send to printer [7].
│ 1 upper │ 4 manual
│ 2 lower │ 7 auto
-t Draft mode. Every other pixel is white.
-Tdensity
Print density (1-5). The default is 3 (medium).
-2-3-4-5-6-8-9-10-12-14-15-16-18
Print in N-up. Requires the psutils package.
-oorient
Orientation used for N-up.
Portrait -op (normal)
Landscape -ol (rotated 90 degrees anticlockwise)
Seascape -os (rotated 90 degrees clockwise)
PrinterTweakingOptions
These are the options used to customize the operation of foo2zjs for a particular printer.
-uxoffxyoff
Set the offset of the start of the printable region from the upper left corner, in pixels [varies
with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on
any other printers.
-lxoffxyoff
Set the offset of the end of the printable region from the lower right corner, in pixels [varies
with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on
any other printers.
-Lmask
Send the logical clipping values from -u/-l in the ZjStream. foo2zjs-wrapper always runs
Ghostscript with the ideal page dimensions, so that the scale of the image is correct, regardless
whether or not the printer has unprintable regions. This option is used to move the position of
the clipped image back to where it belongs on the page. The default is to send the amount which
was clipped by -u and -l, and should be good in most cases.
0 don't send any logical clipping amounts
1 only send Y clipping amount
2 only send X clipping amount
3 send both X and Y clipping amounts
-P Do not send START_PLANE codes on monochrome output. May be needed by some monochrome-only
printers, such as the HP LaserJet 1000.
-Xpadlen
Add extra zero padding to the end of BID segments. The default is 16 bytes. Padding 16 bytes of
zeroes is needed for older ZjStream printers, such as the Minolta 2200DL and HP LaserJet 1000, and
seems harmless to newer ones, such as the Minolta 2300DL. So the default should be good for all
cases.
-zmodel
Model. Default is 0.
0 KM 2300DL / HP 1000 / HP 1005
1 HP 1018 / HP 1020 / HP 1022
2 HP Pro P1102 / P1566 / P1606dn
3 HP Pro CP1025
ColorTweakingOptions
These are the options used to control the quality of color output. Color correction is currently a WORK
IN PROGRESS.
-ggsopts
Additional options to pass to Ghostscript, such as -g“-dDITHERPPI=nnn”, etc. This option may
appear more than once.
-Gprofile.icm
Convert profile.icm to a Postscript color rendering dictionary (CRD) using foo2zjs-icc2ps and
adjust the printer colors by using the Postscript setcolorrendering operator. (WORK IN PROGRESS).
-Ggamma-file.ps
Prepend gamma-file.ps to the Postscript input to perform color correction using the
setcolortransfer Postscript operator. For example, the file might contain:
{0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer
-Iintent
Select profile intent from the ICM file. 0=Perceptual, 1=Colorimetric, 2=Saturation, 3=Absolute.
Default is 0 (perceptual).
DebuggingOptions
These options are used for debugging foo2zjs and its wrapper.
-Splane
Output just a single color plane from a color print and print it on the black plane. The default
is to output all color planes.
1 Cyan
2 Magenta
3 Yellow
4 Black
-Dlevel
Set Debug level [0].
Install Now
Emojis
PNG Icons
