hackrf_transfer - file based transmit and receive sdr

       This manual page was written by Maitland Bottoms for the Debian project (but may be used by others).

       Copyright (c) 2013 A. Maitland Bottoms <bottoms@debian.org>

       This program is free software: you can redistribute it and/or modify  it  under  the  terms  of  the  GNU
       General  Public License as published by the Free Software Foundation, either version 2 of the License, or
       (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY  WARRANTY;  without  even
       the  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
       License for more details.

HACKRF                                              2013.07.1                                 hackrf_transfer(1)

       The  HackRF  project  started by Michael Ossmann and Jared Boone to build software radio peripheral using
       Free Software and Free Hardware design. Care was taken to only use electronic components  with  published
       documentation (no NDAs!) and to avoid software libraries without open source licenses.

       Jawbreaker  is  the  first  complete  HackRF  platform,  a wideband software radio transceiver with a USB
       interface.

       This application lets the user receive data from RF and transmit data to RF.

       hackrf_transfer - file based transmit and receive sdr

       -r <filename> # Receive data into file.

       -t <filename> # Transmit data from file.

       -w # Receive data into file with WAV header and automatic name.

        # This is for SDR# compatibility and may not work with other software.

       [-f set_freq_hz] # Set Freq in Hz

       [-a set_amp] # Set Amp 1=Enable, 0=Disable.

       [-l gain_db] # Set lna gain, 0-40dB, 8dB steps

       [-i gain_db] # Set vga(if) gain, 0-62dB, 2dB steps

       [-x gain_db] # Set TX vga gain, 0-47dB, 1dB steps

       [-s sample_rate_hz] # Set sample rate in Hz (8/10/12.5/16/20MHz)

       [-n num_samples] # Number of samples to transfer (default is unlimited).

       [-b baseband_filter_bw_hz] # Set baseband filter bandwidth in MHz.
               Possible values:
               1.75/2.5/3.5/5/5.5/6/7/8/9/10/12/14/15/20/24/28MHz,
               default < sample_rate_hz.

       Great Scott Gadgets HackRF web page: http://greatscottgadgets.com/hackrf/

       Other hackrf programs:

       hackrf_cpldjtag(1), hackrf_debug(1), hackrf_info(1), hackrf_spiflash(1)

hackrf_transfer[OPTIONS]