hciattach - attach serial devices via UART HCI to BlueZ stack

show   This specifies the serial device to attach. A leading /dev can be omitted.

              Examples: /dev/ttyS1ttyS2type|id
              The  type  or  id  of  the  Bluetooth  device  that is to be attached, i.e. vendor or other device
              specific identifier.  Currently supported types are
                                 ┌──────────┬───────────────────────────────────────┐
                                 │ type     │ Description                           │
                                 ├──────────┼───────────────────────────────────────┤
                                 │ any      │ Unspecified  HCI_UART  interface,  no │
                                 │          │ vendor specific options               │
                                 ├──────────┼───────────────────────────────────────┤
                                 │ ericsson │ Ericsson based modules                │
                                 ├──────────┼───────────────────────────────────────┤
                                 │ digi     │ Digianswer based cards                │
                                 ├──────────┼───────────────────────────────────────┤
                                 │ xircom   │ Xircom   PCMCIA  cards:  Credit  Card │
                                 │          │ Adapter and Real Port Adapter         │
                                 ├──────────┼───────────────────────────────────────┤
                                 │ csr      │ CSR   Casira   serial   adapter    or │
                                 │          │ BrainBoxes serial dongle (BL642)      │
                                 ├──────────┼───────────────────────────────────────┤
                                 │ bboxes   │ BrainBoxes PCMCIA card (BL620)        │
                                 ├──────────┼───────────────────────────────────────┤
                                 │ swave    │ Silicon Wave kits                     │
                                 ├──────────┼───────────────────────────────────────┤
                                 │ bcsp     │ Serial  adapters using CSR chips with │
                                 │          │ BCSP serial protocol                  │
                                 ├──────────┼───────────────────────────────────────┤
                                 │ ath3k    │ Atheros AR300x based serial Bluetooth │
                                 │          │ device                                │
                                 ├──────────┼───────────────────────────────────────┤
                                 │ intel    │ Intel Bluetooth device                │
                                 └──────────┴───────────────────────────────────────┘
                      ┌───────────────────────────────┬───────────────────────────────────────┐
                      │ Supported ID                  │ Description                           │
                      │ (manufacturer id, product id) │                                       │
                      ├───────────────────────────────┼───────────────────────────────────────┤
                      │ 0x0105, 0x080a                │ Xircom  PCMCIA  cards:  Credit   Card │
                      │                               │ Adapter and Real Port Adapter         │
                      ├───────────────────────────────┼───────────────────────────────────────┤
                      │ 0x0160, 0x0002                │ BrainBoxes PCMCIA card (BL620)        │
                      └───────────────────────────────┴───────────────────────────────────────┘

       speed  The speed specifies the UART speed to use. Baudrates higher than 115200bps require vendor specific
              initializations that are not implemented for all types of devices. In general the following speeds
              are supported:

              Supported vendor devices are automatically initialised to their respective best settings.
                                                      ┌────────┐
                                                      │ 9600   │
                                                      ├────────┤
                                                      │ 19200  │
                                                      ├────────┤
                                                      │ 38400  │
                                                      ├────────┤
                                                      │ 57600  │
                                                      ├────────┤
                                                      │ 115200 │
                                                      ├────────┤
                                                      │ 230400 │
                                                      ├────────┤
                                                      │ 460800 │
                                                      ├────────┤
                                                      │ 921600 │
                                                      └────────┘

       flow   If  the flow is appended to the list of options then hardware flow control is forced on the serial
              link (CRTSCTS). All above mentioned device types have flow  set  by  default.  To  force  no  flow
              control use noflow instead.

       sleep|nosleep
              Enables  hardware  specific  power management feature. If sleep is appended to the list of options
              then this feature is enabled. To disable this feature use nosleep  instead.  All  above  mentioned
              device types have nosleep set by default.

              Note: This option will only be valid for hardware which support hardware specific power management
              enable option from host.

       bdaddr The  bdaddr  specifies the Bluetooth Address to use. Some devices (like the STLC2500) do not store
              the Bluetooth address in hardware memory.  Instead it must be uploaded during  the  initialization
              process.  If  this  argument is specified, then the address will be used to initialize the device.
              Otherwise, a default address will be used.

       Maxim Krasnyansky <maxk@qualcomm.com>, Nils Faerber <nils@kernelconcepts.de>

       Free use of this software is granted under ther terms of the GNU Lesser General Public Licenses (LGPL).

BlueZ                                             Jan 22, 2002                                      HCIATTACH(1)

hciattach(1) is used to attach a serial UART to the Bluetooth stack as HCI transport interface.

       hciattach - attach serial devices via UART HCI to BlueZ stack

-i     Send break

       -n     Don't detach from controlling terminal.

       -p     Print the PID when detaching.

       -ttimeout
              Specify an initialization timeout. Default is 5 seconds.

       -sspeed
              Specify an initial speed instead of the hardware default.

       -l     List all available configurations.

       -r     Set the HCI device into raw mode. The kernel and bluetooth daemon will ignore it.

       -h, --help
              Show help options

        <linux-bluetooth@vger.kernel.org>

        <http://www.bluez.org>

hciattach [OPTIONS] <tty> <type|id> [speed] [flow] [sleep] [bdaddr]

       hciattach -1