ipmctl-show-system-capabilities - Shows the platform supported PMem module capabilities.

       Shows the capabilities of the current platform as determined by platform firmware (BIOS) and this
       application.

       Displays the supported PMem module capabilities

           ipmctl show -system -capabilities

       ipmctl-show-system-capabilities - Shows the platform supported PMem module capabilities.

       -a, -all
           Shows all attributes.

           Note

           The all and display options are exclusive and may not be used together.

       -d (attributes), -display (attributes)
           Filters the returned attributes by explicitly specifying a comma separated list of any of the
           attributes defined in the Return Data section.

           Note

           The all and display options are exclusive and may not be used together.

       -h, -help
           Displays help for the command.

       -ddrt
           Used to specify DDRT as the desired transport protocol for the current invocation of ipmctl.

       -smbus
           Used to specify SMBUS as the desired transport protocol for the current invocation of ipmctl.

           Note

           The -ddrt and -smbus options are mutually exclusive and may not be used together.

       -o (text|nvmxml), -output (text|nvmxml)
           Changes the output format. One of: "text" (default) or "nvmxml".

       -u (B|MB|MiB|GB|GiB|TB| TiB), -units (B|MB|MiB|GB|GiB|TB| TiB)
           Changes the units that capacities are displayed in for this command. One of: bytes (B), megabytes
           (MB), mebibytes (MiB), gigabytes (GB), gibibytes (GiB), terabytes (TB) or tebibytes (TiB).

       The default behavior is to return the default attributes listed below; the options can be used to expand
       or restrict the output.

       PlatformConfigSupported
           (Default) Whether the platform level configuration of PMem modules can be modified with the host
           software. One of:

           •   0: Changes must be made in the BIOS.

           •   1: The command [Create Memory Allocation Goal] is supported.

       Alignment
           (Default) Capacity alignment requirement for all memory types as reported by the BIOS.

       AllowedVolatileMode
           (Default) The volatile mode allowed as determined by BIOS setup. One of:

           •   1LM: One-level volatile mode. All configured PMem module resources on the platform assigned for
               memory usage are not in use.

           •   2LM: Two-level volatile mode/Memory Mode. PMem module resources configured as memory act as
               system memory. Any DDR on the platform will act as a cache working in conjunction with the PMem
               modules.

           •   Unknown: The allowed volatile mode cannot be determined.

       CurrentVolatileMode
           (Default) The current volatile mode. One of:

           •   1LM: One-level volatile mode. All configured PMem module resources on the platform assigned for
               memory usage are not in use.

           •   2LM: Two-level volatile mode/Memory Mode. PMem module resources configured as memory act as
               system memory. Any DDR on the platform will act as a cache working in conjunction with the PMem
               modules.

           •   Unknown: The current volatile mode cannot be determined.

       AllowedAppDirectMode
           (Default) The App Direct mode allowed as determined by BIOS setup. One of:

           •   Disabled: App Direct support is currently disabled by the BIOS.

           •   App Direct: App Direct support is currently enabled by the BIOS.

           •   Unknown: The current App Direct support cannot be determined.

       ModesSupported
           A list of PMem module modes supported by the BIOS. Refer to the command [Show Dimm] to determine the
           modes supported by the individual PMem modules. At least one of:

           •   1LM: One-level volatile mode. All configured PMem module resources on the platform assigned for
               memory usage are not in use.

           •   2LM: Two-level volatile mode/Memory Mode. PMem module resources configured as memory act as
               system memory. Any DDR on the platform will act as a cache working in conjunction with the PMem
               modules.

           •   App Direct: PMem module resources are under direct load/store control of the application. DDR is
               unaffected.

           •   Unknown: The current mode cannot be determined.

       SupportedAppDirectSettings
           The BIOS supported list of App Direct interleave settings in the format:

           •   x[Way] - [(IMCSize) iMC x (ChannelSize) Channel] followed by the input format for the command
               [Set Preferences]: (ByOne|(IMCSize)_(ChannelSize)).

       RecommendedAppDirectSettings
           The BIOS recommended list of App Direct interleave settings in the format:

           •   x[Way] - [(IMCSize) iMC x (ChannelSize) Channel] followed by the input format for the command
               [Set Preferences]: (ByOne|(IMCSize)_(ChannelSize)).

       MinNamespaceSize
           The minimum allowed namespace size as reported by the driver.

       AppDirectMirrorSupported
           If the BIOS supports App Direct mirroring. One of:

           •   0: Not supported

           •   1: Supported

       DimmSpareSupported
           If the BIOS supports PMem module sparing. One of:

           •   0: Not supported

           •   1: Supported

       AppDirectMigrationSupported
           If the BIOS supports App Direct migration. One of:

           •   0: Not supported

           •   1: Supported

       RenameNamespaceSupported
           If the host software supports renaming a namespace. One of:

           •   0: Not supported

           •   1: Supported

       GrowAppDirectNamespaceSupported
           If the host software supports increasing the capacity of an App Direct namespace. One of:

           •   0: Not supported

           •   1: Supported

       ShrinkAppDirectNamespaceSupported
           If the host software supports decreasing the capacity of an App Direct namespace. One of:

           •   0: Not supported

           •   1: Supported

       InitiateScrubSupported
           If the platform and host software support initiating an address range scrub on the PMem modules in
           the system. One of:

           •   0: Not supported

           •   1: Supported

       AdrSupported
           Whether the platform supports asynchronous DRAM refresh (ADR). One of:

           •   0: Not supported. If ADR is not supported, App Direct data integrity cannot be assured during
               system interruptions.

           •   1: Supported

       EraseDeviceDataSupported
           Whether Erase Device Data is supported.

           •   0: Not supported

           •   1: Supported

       EnableDeviceSecuritySupported
           Whether Enable Device Security is supported.

           •   0: Not supported

           •   1: Supported

       DisableDeviceSecuritySupported
           Whether Change Device Security property Lockstate = Disabled is supported.

           •   0: Not supported

           •   1: Supported

       UnlockDeviceSecuritySupported
           Whether Change Device Security property Lockstate = Unlocked is supported.

           •   0: Not supported

           •   1: Supported

       FreezeDeviceSecuritySupported
           Whether Change Device Security property Lockstate = Frozen is supported.

           •   0: Not supported

           •   1: Supported

       ChangeDevicePassphraseSupported
           Whether Change Device Passphrase is supported.

           •   0: Not supported

           •   1: Supported

       ChangeMasterPassphraseSupported
           Whether Change Master Passphrase is supported.

           •   0: Not supported

           •   1: Supported

       MasterEraseDeviceDataSupported
           Whether Master Erase Device Data is supported.

           •   0: Not supported

           •   1: Supported

ipmctl                                             2024-04-22                 IPMCTL-SHOW-SYSTEM-CAPABILITIES(1)

           ipmctl show [OPTIONS] -system -capabilities