iscsi-inq - Utility to request INQUIRY data from an iSCSI LUN

       iscsi-inq is a utility to request INQUIRY data from an iSCSI LUN.

       To print the standard INQUIRY page:

                iscsi-inq iscsi://192.0.2.1/iqn.ronnie.test/1

       To list available pages:

                iscsi-inq -e 1 iscsi://192.0.2.1/iqn.ronnie.test/1

       To show a specific page:

                iscsi-inq -e 1 -c 0x80 iscsi://192.0.2.1/iqn.ronnie.test/1

       iSCSI URL format is 'iscsi://[<username>[%<password>]@]<host>[:<port>]/<target-iqn-name>/<lun>'

       Username and password are only required if the target requires CHAP authentication. Optionally you can
       specify the username and password via the environment variables LIBISCSI_CHAP_USERNAME and
       LIBISCSI_CHAP_PASSWORD.

       Host can be specified either as a hostname, an IPv4 address or an IPv6 address. Examples:

                iscsi://192.0.2.1/iqn.ronnie.test/1
                iscsi://[2001:DB8::1]:3261/iqn.ronnie.test/1
                iscsi://ronnie%password@iscsi.example.com/iqn.ronnie.test/1

       Port is the TCP port on the target to connect to. Default is 3260.

       Target-iqn-name is the iqn name of the target. An iSCSI portal can have multiple targets defined. Use
       iscsi-ls to list all targets available on one specific portal.

       LUN is the LUN number to report the INQUIRY data for.

       iscsi-inq - Utility to request INQUIRY data from an iSCSI LUN

       -i --initiator-name=<IQN>
           This specifies the initiator-name that iscsi-inq will use when logging in to the target.

           The default name is 'iqn.2007-10.com.github:sahlberg:libiscsi:iscsi-inq' but you can use this
           argument to override this. This is mainly needed for cases where the target is configured with
           access-control to only allow discovery logins from known initiator-names.

       -e --evpd=<INTEGER>
           By default iscsi-inq will display the standard inquiry data. Specify evpd as 1 to display extended
           VPD pages.

       -c --pagecode=<INTEGER>
           This argument specifies which VPD page to display when evpd is requested. Default is 0x00 which
           represents SUPPORTED VPD PAGES.

           This argument can only be used when evpd is set to 1.

       -d --debug=<INTEGER>
           Debug level.

       -? --help
           Display basic help text.

       --usage
           Display basic usage text.

iscsi-ls(1) http://github.com/sahlberg/libiscsi

iscsi-inq                                          03/22/2014                                       ISCSI-INQ(1)

iscsi-inq[OPTIONS]<ISCSI-URL>iscsi-inq [-i --initiator-name=<IQN>] [-e --evpd=<INTEGER>] [-c --pagecode=<INTEGER>]
                 [-d --debug=<INTEGER>] [-? --help] [--usage] [<ISCSI-URL>]