matroxset - switch the output mode of Matrox video cards

       Program was written by Petr Vandrovec <vandrove@vc.cvut.cz>.

       This  manual  page was written by Shaun Jackman <sjackman@debian.org>, for the Debian GNU system (but may
       be used by others). Updated by Jari Aalto <jari.aalto@cante.net>. Released under license GNU  GPL  v2  or
       (at    your    option)    any    later    version.    For   more   information   about   license,   visit
       <http://www.gnu.org/copyleft/gpl.html>.

matroxset                                          2020-06-01                                       matroxset(1)

       Output Matrox card video to television. PAL 50Hz and NTSC 59.94Hz are supported,  Composite  and  S-Video
       output.

       Contains  two  demo programs, normal and swapped. First selects CRTC1 on first output and CRTC2 on second
       one. Swapped connects CRTC1 to secondary head and CRTC2 to primary head. You can use  these  programs  if
       you need text mode or 8bpp mode on TV, as CRTC2 is incapable of these modes.

       In  program  call,  If  VALUE is specified, set the specified option to VALUE. If VALUE is not specified,
       retrieve the value of the specified option.

       For technical information, see TV-outontheG450 at <http://www.bglug.ca/matrox_tvout>. See also "Matrox
       Marvel" tips  for  G200,  G400  at  <http://marvel.sourceforge.net/>.  Matrox  frame  buffer  headers  at
       /usr/include/linux/matroxfb.h

       None.

       None.

       matroxset - switch the output mode of Matrox video cards

-c  Get/set control value.

       -e  Edit controls interactively.

       -fDEVICE
           Manipulate the frame buffer DEVICE (default is /dev/fb1).

       -l  List controls

       -m  Connect this frame buffer to the outputs specified in VALUE (0 is none, 1 is primary, 2 is secondary,
           4 is digital flat panel; these values may be summed for multiple outputs).

       -oOUTPUT
           Set  OUTPUT  (0 is primary, 1 is secondary, default is 1) to the output mode VALUE (128 is monitor, 1
           is PAL TV, 2 is NTSC TV).

       -p  Display information about blanking.

directvnc(1) fbdev(4) fbgrab(1) fbset(1) fbterm(1) Xvfb(1)

          matroxset [OPTIONS] [VALUE]