mkgeo_contraction - mesh of an abrupt contraction (rheolef-7.2)

       Pierre  Saramito  <Pierre.Saramito@imag.fr>

       The boundary sides are represented by domains: axis, wall, upstream and downstream.

       Copyright   (C)  2000-2018  Pierre  Saramito  <Pierre.Saramito@imag.fr> GPLv3+: GNU GPL version 3 or
       later  <http://gnu.org/licenses/gpl.html>.  This  is  free  software:  you  are free to change and
       redistribute it.  There is NO WARRANTY, to the extent permitted by law.

rheolef                                            Version 7.2                       mkgeo_contraction(1rheolef)

       This command is convenient for building a mesh for the abrupt contraction, as it is a very classical
       benchmark in complex fluid flow problems. It calls bamg unstructured mesh generator with anisotropy
       feature. The mesh files goes on name.geo where name is the basename for the output (see option -name
       below). The three auxiliary files required for automatic mesh generation with Rheolef combined with bamg
       are also provided:

               name.bamg
               name.bamgcad
               name.dmn

       The following command build a triangle-based 2d unstructured mesh of the [-10,0]x[0,4] u [0,10]x[0,1]
       mesh

           mkgeo_contraction
           geo contraction.geo

       This documentation has been generated from file main/sbin/mkgeo_contraction.sh

       mkgeo_contraction - mesh of an abrupt contraction (rheolef-7.2)

       -name string

            Set the basename for the output files. By default, the basename is contraction.

       -[no]split

            Split each triangle in three subtriangles by inserting the barycenter as an additional node. This is
           useful for using the Scott and Vogelius incompressible mixed finite element P2-P1d for velocity-
           pressure approximation. Default is no split.

       -[no]clean

            Clear temporary files (this is the default).

       -[no]verbose

            In verbose mode, print to stderr all commands and logs.

       mkgeo_contraction [options] [nx [ny]]

       The optional nx and ny arguments are integers that specifies the subdivision in each direction. By
       default nx=1 and ny=nx. Changing the density applies the factor 1/nx to all the mesh edges lengths.

       -hmin float

            Controls the edge length at the re-entrant corner of the contraction. Default is hmin=0.1. Changing
           the density by the previous options applies the factor 1/n to hmin also.

       The geometry is [-Lu,0]x[0,d] u [0,Ld]x[0,1]. By default c=4 is the contraction ratio and Lu=Ld=10 are
       the upstream and downstream pipe lengths.

       -c float
       -Lu float
       -Ld float

            These options control the geometry parameters.

       -cartesian
       -zr
       -rz

            These options control the geometry coordinate system. Default is Cartesian.