-A, --smarthome
Make the Home key smarter. When Home is pressed anywhere but at the very beginning of non-
whitespace characters on a line, the cursor jumps to that beginning (either forwards or
backwards). If the cursor is already at that position, it jumps to the true beginning of the
line.
-B, --backup
When saving a file, back up the previous version of it, using the current filename suffixed with a
tilde (~).
-Cdirectory, --backupdir=directory
Make and keep not just one backup file, but make and keep a uniquely numbered one every time a
file is saved -- when backups are enabled (-B). The uniquely numbered files are stored in the
specified directory.
-D, --boldtext
For the interface, use bold instead of reverse video. This can be overridden for specific
elements by setting the options titlecolor, statuscolor, promptcolor, minicolor, keycolor,
numbercolor, and/or selectedcolor in your nanorc file. See nanorc(5).
-E, --tabstospaces
Convert each typed tab to spaces -- to the number of spaces that a tab at that position would take
up. (Note: pasted tabs are not converted.)
-F, --multibuffer
Read a file into a new buffer by default.
-G, --locking
Use vim-style file locking when editing files.
-H, --historylog
Save the last hundred search strings and replacement strings and executed commands, so they can be
easily reused in later sessions.
-I, --ignorercfiles
Don't look at the system's nanorc nor at the user's nanorc.
-Jnumber, --guidestripe=number
Draw a vertical stripe at the given column, to help judge the width of the text. (The color of
the stripe can be changed with setstripecolor in your nanorc file.)
-K, --rawsequences
Interpret escape sequences directly, instead of asking ncurses to translate them. (If you need
this option to get some keys to work properly, it means that the terminfo terminal description
that is used does not fully match the actual behavior of your terminal. This can happen when you
ssh into a BSD machine, for example.) Using this option disables nano's mouse support.
-L, --nonewlines
Don't automatically add a newline when a text does not end with one. (This can cause you to save
non-POSIX text files.)
-M, --trimblanks
Snip trailing whitespace from the wrapped line when automatic hard-wrapping occurs or when text is
justified.
-N, --noconvert
Disable automatic conversion of files from DOS/Mac format.
-O, --bookstyle
When justifying, treat any line that starts with whitespace as the beginning of a paragraph
(unless auto-indenting is on).
-P, --positionlog
For the 200 most recent files, log the last position of the cursor, and place it at that position
again upon reopening such a file.
-Q"regex", --quotestr="regex"
Set the regular expression for matching the quoting part of a line. The default value is
"^([\t]*([!#%:;>|}]|//))+". (Note that \t stands for an actual Tab.) This makes it possible to
rejustify blocks of quoted text when composing email, and to rewrap blocks of line comments when
writing source code.
-R, --restricted
Restricted mode: don't read or write to any file not specified on the command line. This means:
don't read or write history files; don't allow suspending; don't allow spell checking; don't allow
a file to be appended to, prepended to, or saved under a different name if it already has one; and
don't make backup files. Restricted mode can also be activated by invoking nano with any name
beginning with 'r' (e.g. "rnano").
-S, --softwrap
Display over multiple screen rows lines that exceed the screen's width. (You can make this soft-
wrapping occur at whitespace instead of rudely at the screen's edge, by using also --atblanks.)
-Tnumber, --tabsize=number
Set the size (width) of a tab to number columns. The value of number must be greater than 0. The
default value is 8.
-U, --quickblank
Make status-bar messages disappear after 1 keystroke instead of after 20. Note that option -c
(--constantshow) overrides this. When option --minibar or --zero is in effect, --quickblank makes
a message disappear after 0.8 seconds instead of after the default 1.5 seconds.
-V, --version
Show the current version number and exit.
-W, --wordbounds
Detect word boundaries differently by treating punctuation characters as part of a word.
-X"characters", --wordchars="characters"
Specify which other characters (besides the normal alphanumeric ones) should be considered as part
of a word. When using this option, you probably want to omit -W (--wordbounds).
-Yname, --syntax=name
Specify the name of the syntax highlighting to use from among the ones defined in the nanorc
files.
-Z, --zap
Let an unmodified Backspace or Delete erase the marked region (instead of a single character, and
without affecting the cutbuffer).
-a, --atblanks
When doing soft line wrapping, wrap lines at whitespace instead of always at the edge of the
screen.
-b, --breaklonglines
Automatically hard-wrap the current line when it becomes overlong. (This option is the opposite
of -w (--nowrap) -- the last one given takes effect.)
-c, --constantshow
Constantly show the cursor position on the status bar. Note that this overrides option -U
(--quickblank).
-d, --rebinddelete
Interpret the Delete and Backspace keys differently so that both Backspace and Delete work
properly. You should only use this option when on your system either Backspace acts like Delete
or Delete acts like Backspace.
-e, --emptyline
Do not use the line below the title bar, leaving it entirely blank.
-ffile, --rcfile=file
Read only this file for setting nano's options, instead of reading both the system-wide and the
user's nanorc files.
-g, --showcursor
Make the cursor visible in the file browser (putting it on the highlighted item) and in the help
viewer. Useful for braille users and people with poor vision.
-h, --help
Show a summary of the available command-line options and exit.
-i, --autoindent
Automatically indent a newly created line to the same number of tabs and/or spaces as the previous
line (or as the next line if the previous line is the beginning of a paragraph).
-j, --jumpyscrolling
Scroll the buffer contents per half-screen instead of per line.
-k, --cutfromcursor
Make the 'Cut Text' command (normally ^K) cut from the current cursor position to the end of the
line, instead of cutting the entire line.
-l, --linenumbers
Display line numbers to the left of the text area. (Any line with an anchor additionally gets a
mark in the margin.)
-m, --mouse
Enable mouse support, if available for your system. When enabled, mouse clicks can be used to
place the cursor, set the mark (with a double click), and execute shortcuts. The mouse works in
the X Window System, and on the console when gpm is running. Text can still be selected through
dragging by holding down the Shift key.
-n, --noread
Treat any name given on the command line as a new file. This allows nano to write to named pipes:
it starts with a blank buffer, and writes to the pipe when the user saves the "file". This way
nano can be used as an editor in combination with for instance gpg without having to write
sensitive data to disk first.
-odirectory, --operatingdir=directory
Set the operating directory. This makes nano set up something similar to a chroot.
-p, --preserve
Preserve the XOFF and XON sequences (^S and ^Q) so that they are caught by the terminal (stopping
and resuming the output). Note that option -/ (--modernbindings) overrides this.
-q, --indicator
Display a "scrollbar" on the righthand side of the edit window. It shows the position of the
viewport in the buffer and how much of the buffer is covered by the viewport.
-rnumber, --fill=number
Set the target width for justifying and automatic hard-wrapping at this number of columns. If the
value is 0 or less, wrapping occurs at the width of the screen minus number columns, allowing the
wrap point to vary along with the width of the screen if the screen is resized. The default value
is -8.
-s"program [argument ...]", --speller="program [argument ...]"
Use this command to perform spell checking and correcting, instead of using the built-in corrector
that calls hunspell(1) or spell(1).
-t, --saveonexit
Save a changed buffer without prompting (when exiting with ^X).
-u, --unix
Save a file by default in Unix format. This overrides nano's default behavior of saving a file in
the format that it had. (This option has no effect when you also use --noconvert.)
-v, --view
Just view the file and disallow editing: read-only mode. This mode allows the user to open also
other files for viewing, unless --restricted is given too.
-w, --nowrap
Do not automatically hard-wrap the current line when it becomes overlong. This is the default.
(This option is the opposite of -b (--breaklonglines) -- the last one given takes effect.)
-x, --nohelp
Don't show the two help lines at the bottom of the screen.
-y, --afterends
Make Ctrl+Right and Ctrl+Delete stop at word ends instead of beginnings.
-z, --listsyntaxes
List the names of the available syntaxes and exit.
-!, --magic
When neither the file's name nor its first line give a clue, try using libmagic to determine the
applicable syntax.
-@, --colonparsing
When a filename given on the command line ends in a colon plus digits and this filename does not
exist, then snip the colon plus digits and understand the digits as a line number. If the trimmed
filename does not exist either, then repeat the process and understand the obtained two numbers as
line and column number. But if the doubly trimmed filename does not exist either, then forget the
trimming and accept the original filename as is. To disable this colon parsing for some file, use
+1 or similar before the relevant filename.
-%, --stateflags
Use the top-right corner of the screen for showing some state flags: I when auto-indenting, M when
the mark is on, L when hard-wrapping (breaking long lines), R when recording a macro, and S when
soft-wrapping. When the buffer is modified, a star (*) is shown after the filename in the center
of the title bar.
-_, --minibar
Suppress the title bar and instead show information about the current buffer at the bottom of the
screen, in the space for the status bar. In this "mini bar" the filename is shown on the left,
followed by an asterisk if the buffer has been modified. On the right are displayed the current
line and column number, the code of the character under the cursor (in Unicode format: U+xxxx),
the same flags as are shown by --stateflags, and a percentage that expresses how far the cursor is
into the file (linewise). When a file is loaded or saved, and also when switching between
buffers, the number of lines in the buffer is displayed after the filename. This number is
cleared upon the next keystroke, or replaced with an [i/n] counter when multiple buffers are open.
The line plus column numbers and the character code are displayed only when --constantshow is
used, and can be toggled on and off with M-C. The state flags are displayed only when
--stateflags is used.
-0, --zero
Hide all elements of the interface (title bar, status bar, and help lines) and use all rows of the
terminal for showing the contents of the buffer. The status bar appears only when there is a
significant message, and disappears after 1.5 seconds or upon the next keystroke. With M-Z the
title bar plus status bar can be toggled. With M-X the help lines.
-/, --modernbindings
Use key bindings similar to the ones that most modern programs use: ^X cuts, ^C copies, ^V pastes,
^Z undoes, ^Y redoes, ^F searches forward, ^G searches next, ^S saves, ^O opens a file, ^Q quits,
and (when the terminal permits) ^H shows help. Furthermore, ^A sets the mark, ^R makes
replacements, ^D searches previous, ^P shows the position, ^T goes to a line, ^W writes out a
file, and ^E executes a command. Note that this overrides option -p (--preserve).
Install Now
PNG Icons
