nfc-mfclassic - MIFARE Classic command line tool

       Adam Laurie <adam@algroup.co.uk>,
       Roel Verdult <roel@libnfc.org>,
       Romain Tartière <romain@libnfc.org>,
       Romuald Conty <romuald@libnfc.org>.

       This  manual  page  was written by Romuald Conty <romuald@libnfc.org>.  It is licensed under the terms of
       the GNU GPL (version 2 or later).

libnfc                                            Nov 02, 2009                                  nfc-mfclassic(1)

       Please report any bugs on the libnfc issue tracker at:
       https://github.com/nfc-tools/libnfc/issues

nfc-mfclassic  is  a MIFARE Classic tool that allow to read or write DUMP file using MIFARE keys provided
       in KEYS file.

       MIFARE Classic tag is one of the most widely used RFID tags.

       The firmware in the NFC controller supports authenticating, reading and writing  to/from  MIFARE  Classic
       tags.  This  tool  demonstrates  the speed of this library and its ease-of-use. It's possible to read and
       write the complete content of a MIFARE Classic 4KB tag within 1 second. It uses a binary MIFARE Dump file
       (MFD) to store the keys and data for all sectors.

       Be cautious that some parts of a MIFARE Classic memory are used for r/w access of the rest of the memory,
       so please read the tag documentation before experimenting too much!

       The f option to format the card will reset all keys to FFFFFFFFFFFF, all data  to  00  and  all  ACLs  to
       default.

       The  W  option  allows  writing  of  special  MIFARE  cards that can be 'unlocked' to allow block 0 to be
       overwritten. This includes UID and manufacturer data. Take care when amending UIDs to set the correct BCC
       (UID checksum). Currently only 4 byte UIDs are supported.

       Similarly, the R option allows an 'unlocked' read. This bypasses authentication and allows reading of the
       Key A and Key B data regardless of ACLs.

       R/W errors on some blocks can be either considered as critical or  ignored.   To  halt  on  first  error,
       specify keys with lowercase ( a or b ). To ignore such errors, use uppercase ( A or B ).

       When  using  multiple  tags  infront of a reader, the U option can be used to supply the UID of tag to be
       read or written. Append the hexadecimal UID to the U option. For example U01ab23cd for  the  4  byte  UID
       0x01  0xab  0x23  0xcd. Using the u parameter instead will use whatever libnfc decides which generally is
       the lowest UID.

       *** Note that W and R options only work on special versions of MIFARE 1K cards (Chinese clones).

libnfc is licensed under the GNU Lesser General Public License (LGPL), version 3.
       libnfc-utils and libnfc-examples are covered by the the BSD 2-Clause license.

       nfc-mfclassic - MIFARE Classic command line tool

f | r | R | w | W
              Perform format ( f ) or read from ( r ) or unlocked read from ( R ) or write to ( w ) or  unlocked
              write to ( W ) card.

       a | A | b | B
              Use A or B MIFARE keys.  Halt on errors ( a | b ) or tolerate errors ( A | B ).

       u | U  Use the default UID ( u ) or supply a valid 4 byte UID ( U<uid> ).

       DUMP   MiFare Dump (MFD) used to write (card to MFD) or (MFD to card)

       KEYS   MiFare Dump (MFD) that contains the keys (optional). Data part of the dump is ignored.

       f      Force using the keyfile KEYS even if UID does not match (optional).

nfc-mfclassicf|r|R|w|Wa|A|b|Bu|U<uid> DUMP [ KEYS [f] ]