nvme-wdc-vs-telemetry-controller-option - Disable/Enable the controller initiated option of the telemetry

       For the NVMe device given, sends the WDC Vendor Specific set feature command to disable, enable or get
       current status the controller initiated option of the telemetry log page.

       The <device> parameter is mandatory NVMe character device (ex: /dev/nvme0).

       This will only work on WDC devices supporting this feature. Results for any other device are undefined.

       •   Disables the controller initiated option of the telemetry log page:

               # nvme wdc vs-telemetry-controller-option /dev/nvme0 --disable
               # nvme wdc vs-telemetry-controller-option /dev/nvme0 -d

       •   Enables the controller initiated option of the telemetry log page:

               # nvme wdc vs-telemetry-controller-option /dev/nvme0 --enable
               # nvme wdc vs-telemetry-controller-option /dev/nvme0 -e

       •   Gets the current status (enabled or disabled) of the controller initiated option of the telemetry log
           page:

               # nvme wdc vs-telemetry-controller-option /dev/nvme0 --status
               # nvme wdc vs-telemetry-controller-option /dev/nvme0 -s

       nvme-wdc-vs-telemetry-controller-option - Disable/Enable the controller initiated option of the telemetry
       log page.

       Part of the nvme-user suite.

NVMe                                               02/16/2025                               NVME-WDC-VS-TELEM(1)

       -d, --disable
           Disables the controller initiated option of the telemetry log page.

       -e, --enable
           Enables the controller initiated option of the telemetry log page.

       -s, --status
           Returns the current status (enabled or disabled) of the controller initiated option of the telemetry
           log page.

nvmewdcvs-telemetry-controller-option <device>
                               [--disable, -d] [--enable, -e] [--status, -s]