nvme-zns-finish-zone - Finishes one or all zones

       For the NVMe device given, issues the Zone Management Send command with the "Finish Zone" action. This
       will transition the zone to the full state on success.

       The <device> parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0), or a
       namespace block device (ex: /dev/nvme0n1).

       •   Finish all zones on namespace 1:

               # nvme zns finish-zone /dev/nvme0 -a -n 1

       nvme-zns-finish-zone - Finishes one or all zones

       Part of nvme-cli

NVMe                                               02/16/2025                               NVME-ZNS-FINISH-Z(1)

       -n <NUM>, --namespace-id=<NUM>
           Use the provided namespace id for the command. If not provided, the namespace id of the block device
           will be used. If the command is issued to a non-block device, the parameter is required.

       -s <lba>, --start-lba=<lba>
           The starting LBA of the zone to finish.

       -a, --select-all
           Select all zones for this action.

       -t <timeout>, --timeout=<timeout>
           Override default timeout value. In milliseconds.

nvmeznsfinish-zone <device> [--namespace-id=<NUM> | -n <NUM>]
                                                       [--start-lba=<LBA> | -s <LBA>]
                                                       [--select-all | -a]
                                                       [--timeout=<timeout> | -t <timeout>]