nvme-zns-open-zone - Opens one or all zones

       For the NVMe device given, issues the Zone Management Send command with the "Open Zone" action. This will
       transition the zone to the opened state.

       The <device> parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0), or a
       namespace block device (ex: /dev/nvme0n1).

       •   Open the first zone on namespace 1:

               # nvme zns open-zone /dev/nvme0 -n 1 -s 0

       nvme-zns-open-zone - Opens one or all zones

       Part of nvme-cli

NVMe                                               02/16/2025                               NVME-ZNS-OPEN-ZON(1)

       -n <NUM>, --namespace-id=<NUM>
           Use the provided namespace id for the command. If not provided, the namespace id of the block device
           will be used. If the command is issued to a non-block device, the parameter is required.

       -s <lba>, --start-lba=<lba>
           The starting LBA of the zone to open.

       -r, --zrwaa
           Allocate Zone Random Write Area to zone

       -a, --select-all
           Select all zones for this action

       -t <timeout>, --timeout=<timeout>
           Override default timeout value. In milliseconds.

nvmeznsopen-zone <device> [--namespace-id=<NUM> | -n <NUM>]
                               [--start-lba=<LBA> | -s <LBA>] [--zrwaa | -r]
                               [--select-all | -a] [--timeout=<timeout> | -t <timeout>]