nvme-zns-reset-zone - Resets one or all zones

       For the NVMe device given, issues the Zone Management Send command with the "Reset Zone" action. This
       will transition the zone to the empty state, setting the write pointer for each zone back to the
       beginning on success.

       The <device> parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0), or a
       namespace block device (ex: /dev/nvme0n1).

       •   Reset the first zone on namespace 1:

               # nvme zns reset-zone /dev/nvme0 -n 1 -s 0

       nvme-zns-reset-zone - Resets one or all zones

       Part of nvme-cli

NVMe                                               02/16/2025                               NVME-ZNS-RESET-ZO(1)

       -n <NUM>, --namespace-id=<NUM>
           Use the provided namespace id for the command. If not provided, the namespace id of the block device
           will be used. If the command is issued to a non-block device, the parameter is required.

       -s <lba>, --start-lba=<lba>
           The starting LBA of the zone to reset.

       -a, --select-all
           Select all zones for this action

       -t <timeout>, --timeout=<timeout>
           Override default timeout value. In milliseconds.

nvmeznsreset-zone <device> [--namespace-id=<NUM> | -n <NUM>]
                               [--start-lba=<LBA> | -s <LBA>]
                               [--select-all | -a]
                               [--timeout=<timeout> | -t <timeout>]