There are a lot of options the meaning of some depends of whether a PKCS#12 file is being created or
parsed. By default a PKCS#12 file is parsed. A PKCS#12 file can be created by using the -export option
(see below). The PKCS#12 export encryption and MAC options such as -certpbe and -iter and many further
options such as -chain are relevant only with -export. Conversely, the options regarding encryption of
private keys when outputting PKCS#12 input are relevant only when the -export option is not given.
The default encryption algorithm is AES-256-CBC with PBKDF2 for key derivation.
When encountering problems loading legacy PKCS#12 files that involve, for example, RC2-40-CBC, try using
the -legacy option and, if needed, the -provider-path option.
-help
Print out a usage message.
-passinarg
The password source for the input, and for encrypting any private keys that are output. For more
information about the format of arg see openssl-passphrase-options(1).
-passoutarg
The password source for output files.
-passwordarg
With -export, -password is equivalent to -passout, otherwise it is equivalent to -passin.
-twopass
Prompt for separate integrity and encryption passwords: most software always assumes these are the
same so this option will render such PKCS#12 files unreadable. Cannot be used in combination with the
options -password, -passin if importing from PKCS#12, or -passout if exporting.
-nokeys
No private keys will be output.
-nocerts
No certificates will be output.
-noout
This option inhibits all credentials output, and so the input is just verified.
-legacy
Use legacy mode of operation and automatically load the legacy provider. If OpenSSL is not installed
system-wide, it is necessary to also use, for example, "-provider-path ./providers" or to set the
environment variable OPENSSL_MODULES to point to the directory where the providers can be found.
In the legacy mode, the default algorithm for certificate encryption is RC2_CBC or 3DES_CBC depending
on whether the RC2 cipher is enabled in the build. The default algorithm for private key encryption
is 3DES_CBC. If the legacy option is not specified, then the legacy provider is not loaded and the
default encryption algorithm for both certificates and private keys is AES_256_CBC with PBKDF2 for
key derivation.
-engineid
See "Engine Options" in openssl(1). This option is deprecated.
-providername-provider-pathpath-propquerypropq
See "Provider Options" in openssl(1), provider(7), and property(7).
-randfiles, -writerandfile
See "Random State Options" in openssl(1) for details.
PKCS#12input(parsing)options-infilename|uri
This specifies the input filename or URI. Standard input is used by default. Without the -export
option this must be PKCS#12 file to be parsed. For use with the -export option see the "PKCS#12
output (export) options" section.
-outfilename
The filename to write certificates and private keys to, standard output by default. They are all
written in PEM format.
-info
Output additional information about the PKCS#12 file structure, algorithms used and iteration counts.
-nomacver
Don't attempt to verify the integrity MAC.
-clcerts
Only output client certificates (not CA certificates).
-cacerts
Only output CA certificates (not client certificates).
-aes128, -aes192, -aes256
Use AES to encrypt private keys before outputting.
-aria128, -aria192, -aria256
Use ARIA to encrypt private keys before outputting.
-camellia128, -camellia192, -camellia256
Use Camellia to encrypt private keys before outputting.
-des
Use DES to encrypt private keys before outputting.
-des3
Use triple DES to encrypt private keys before outputting.
-idea
Use IDEA to encrypt private keys before outputting.
-noenc
Don't encrypt private keys at all.
-nodes
This option is deprecated since OpenSSL 3.0; use -noenc instead.
PKCS#12output(export)options-export
This option specifies that a PKCS#12 file will be created rather than parsed.
-outfilename
This specifies filename to write the PKCS#12 file to. Standard output is used by default.
-infilename|uri
This specifies the input filename or URI. Standard input is used by default. With the -export
option this is a file with certificates and a key, or a URI that refers to a key accessed via an
engine. The order of credentials in a file doesn't matter but one private key and its corresponding
certificate should be present. If additional certificates are present they will also be included in
the PKCS#12 output file.
-inkeyfilename|uri
The private key input for PKCS12 output. If this option is not specified then the input file (-in
argument) must contain a private key. If no engine is used, the argument is taken as a file. If the
-engine option is used or the URI has prefix "org.openssl.engine:" then the rest of the URI is taken
as key identifier for the given engine.
-certfilefilename
An input file with extra certificates to be added to the PKCS#12 output if the -export option is
given.
-passcertsarg
The password source for certificate input such as -certfile and -untrusted. For more information
about the format of arg see openssl-passphrase-options(1).
-chain
If this option is present then the certificate chain of the end entity certificate is built and
included in the PKCS#12 output file. The end entity certificate is the first one read from the -in
file if no key is given, else the first certificate matching the given key. The standard CA trust
store is used for chain building, as well as any untrusted CA certificates given with the -untrusted
option.
-untrustedfilename
An input file of untrusted certificates that may be used for chain building, which is relevant only
when a PKCS#12 file is created with the -export option and the -chain option is given as well. Any
certificates that are actually part of the chain are added to the output.
-CAfilefile, -no-CAfile, -CApathdir, -no-CApath, -CAstoreuri, -no-CAstore
See "Trusted Certificate Options" in openssl-verification-options(1) for details.
-namefriendlyname
This specifies the "friendly name" for the certificates and private key. This name is typically
displayed in list boxes by software importing the file.
-canamefriendlyname
This specifies the "friendly name" for other certificates. This option may be used multiple times to
specify names for all certificates in the order they appear. Netscape ignores friendly names on other
certificates whereas MSIE displays them.
-CSPname
Write name as a Microsoft CSP name. The password source for the input, and for encrypting any
private keys that are output. For more information about the format of arg see
openssl-passphrase-options(1).
-LMK
Add the "Local Key Set" identifier to the attributes.
-keyex|-keysig
Specifies that the private key is to be used for key exchange or just signing. This option is only
interpreted by MSIE and similar MS software. Normally "export grade" software will only allow 512 bit
RSA keys to be used for encryption purposes but arbitrary length keys for signing. The -keysig option
marks the key for signing only. Signing only keys can be used for S/MIME signing, authenticode
(ActiveX control signing) and SSL client authentication, however, due to a bug only MSIE 5.0 and
later support the use of signing only keys for SSL client authentication.
-keypbealg, -certpbealg
These options allow the algorithm used to encrypt the private key and certificates to be selected.
Any PKCS#5 v1.5 or PKCS#12 PBE algorithm name can be used (see "NOTES" section for more information).
If a cipher name (as output by "openssl list -cipher-algorithms") is specified then it is used with
PKCS#5 v2.0. For interoperability reasons it is advisable to only use PKCS#12 algorithms.
Special value "NONE" disables encryption of the private key and certificates.
-descert
Encrypt the certificates using triple DES. By default the private key and the certificates are
encrypted using AES-256-CBC unless the '-legacy' option is used. If '-descert' is used with the
'-legacy' then both, the private key and the certificates are encrypted using triple DES.
-macalgdigest
Specify the MAC digest algorithm. If not included SHA256 will be used.
-pbmac1_pbkdf2
Use PBMAC1 with PBKDF2 for MAC protection of the PKCS#12 file.
-pbmac1_pbkdf2_mddigest
Specify the PBKDF2 KDF digest algorithm. If not specified, SHA256 will be used. Unless
"-pbmac1_pbkdf2" is specified, this parameter is ignored.
-itercount
This option specifies the iteration count for the encryption key and MAC. The default value is 2048.
To discourage attacks by using large dictionaries of common passwords the algorithm that derives keys
from passwords can have an iteration count applied to it: this causes a certain part of the algorithm
to be repeated and slows it down. The MAC is used to check the file integrity but since it will
normally have the same password as the keys and certificates it could also be attacked.
-noiter, -nomaciter
By default both encryption and MAC iteration counts are set to 2048, using these options the MAC and
encryption iteration counts can be set to 1, since this reduces the file security you should not use
these options unless you really have to. Most software supports both MAC and encryption iteration
counts. MSIE 4.0 doesn't support MAC iteration counts so it needs the -nomaciter option.
-maciter
This option is included for compatibility with previous versions, it used to be needed to use MAC
iterations counts but they are now used by default.
-macsaltlen
This option specifies the salt length in bytes for the MAC. The salt length should be at least 16
bytes as per NIST SP 800-132. The default value is 8 bytes for backwards compatibility.
-nomac
Do not attempt to provide the MAC integrity. This can be useful with the FIPS provider as the PKCS12
MAC requires PKCS12KDF which is not an approved FIPS algorithm and cannot be supported by the FIPS
provider.
-jdktrust
Export pkcs12 file in a format compatible with Java keystore usage. This option accepts a string
parameter indicating the trust oid name to be granted to the certificate it is associated with.
Currently only "anyExtendedKeyUsage" is defined. Note that, as Java keystores do not accept PKCS12
files with both trusted certificates and keypairs, use of this option implies the setting of the
-nokeys option
Install Now
PNG Icons
Emojis