osmotv-f<frequency>|-c<channel><command>command:
tx-fubk
Transmit FUBK test image (German PAL image)
tx-ebu Transmit EBU test image (color bars)
tx-convergence
Transmit convergence grid for color adjustemnt
tx-black
Transmit single color image
tx-blue
Transmit single color image
tx-red Transmit single color image (for DY adjustment)
tx-magenta
Transmit single color image
tx-green
Transmit single color image
tx-cyan
Transmit single color image
tx-yellow
Transmit single color image
tx-white
Transmit single color image
tx-vcr Transmit Jolly's VCR test pattern
tx-img [<image>] Transmit natural image or given image file
Use 4:3 image with 574 lines for best result.
generaloptions:-h--help
This help
--config [~/]<path to config file>
Give a config file to use. If it starts with '~/', path is at home dir. Each line in config file
is one option, '-' or '--' must not be given!
-f--frequency <frequency>
Give frequency in Hertz.
-c--channel <channel>
Or give channel number. Special channels start with 's' or 'S'. Use 'list' to get a channel list.
-s--samplerate <frequency>
Give sample rate in Hertz.
-w--wave-file <filename>
Output to wave file instead of SDR
-r--realtime <prio>
Set prio: 0 to disable, 99 for maximum (default = 0)
signaloptions:-F--fbas 1 | 0
Turn color on or off. (default = 1)
-T--tone 1 | 0
Turn tone on or off. (default = 1)
FUBKoptions:-R--circle-radius <radius> | 0
Use circle radius or 0 for off. (default = 6.7)
-C--color-bar 1 | 0
1 == Color bar on, 0 = Show complete middle field. (default = 0) For clean scope signal, also turn
off circle by setting radius to 0.
-G--grid-only 1 | 0
1 == Show only the grid of the test image. (default = 0)
-I--sation-id "<text>"
Give exactly 12 characters to display as Station ID. (default = "Jolly Roger")
convergenceoptions:-W--grid-width 2 | 1
Thickness of grid. (default = 0)
--limesdr
Auto-select several required options for LimeSDR
--limesdr-mini
Auto-select several required options for LimeSDR Mini
SDRoptions:--sdr-soapy
Force SoapySDR driver
--sdr-channel <channel #>
Give channel number for multi channel SDR device (default = 0)
--sdr-device-args <args>
--sdr-stream-args <args>
--sdr-tune-args <args>
Optional SDR device arguments, separated by comma e.g. --sdr-device-args
<key>=<value>[,<key>=<value>[,...]]
--sdr-samplerate <samplerate>
Sample rate to use with SDR. By default it equals the regular sample rate.
--sdr-lo-offset <Hz>
Give frequency offset in Hz to move the local oscillator away from the target frequency. (default
= -3000000)
--sdr-bandwidth <bandwidth>
Give IF filter bandwidth to use. If not, sample rate is used.
--sdr-rx-antenna <name>
SDR device's RX antenna name, use 'list' to get a list
--sdr-tx-antenna <name>
SDR device's TX antenna name, use 'list' to get a list
--sdr-clock-source <name>
SDR device's clock sourc name, use 'list' to get a list
--sdr-rx-gain <gain>
SDR device's RX gain in dB (default = 0.0)
--sdr-tx-gain <gain>
SDR device's TX gain in dB (default = 0.0)
--write-iq-rx-wave <file>
Write received IQ data to given wave file.
--write-iq-tx-wave <file>
Write transmitted IQ data to given wave file.
--read-iq-rx-wave <file>
Replace received IQ data by given wave file.
--read-iq-tx-wave <file>
Replace transmitted IQ data by given wave file.
--sdr-swap-links
Swap RX and TX frequencies for loopback tests over the air.
--sdr-timestamps 1 | 0
Use TX timestamps on UHD device. (default = 1)
osmotv(1)
Install Now
PNG Icons
