ossmix - Open Sound System command-line mixer program.

       4Front Technologies

                                                11 February 2015                                       ossmix(1)

       Changing the values is done just like with the original "mixer" applet.  For example:

               ossmix pcm 50:60

       The above sets the pcm control (audio playback volume) so that the left channel  volume  is  50  and  the
       right channel volume is 60. With just "ossmix pcm 50" the both channel volumes will be set to 50.

       In  addition  to  the  old mixer there are now some (usually ON/OFF) settings.  These settings are device
       specific and don't work with all soundcards.  The easiest way to find them out is to start ossmix without
       command line arguments (other than -d#).

       Some control names contain a dot ("."). This dot is  required  when  changing  the  value.  For  example:
       "ossmix-d0 mic.micboost ON".

ossmix  is a simple command-line mixer utility that is used to display the mixer settings of physical and
       virtual audio devices. OSS version 4 has an extended  mixer  API  which  supports  some  device  specific
       features that may not available using other mixer applications.

ossmixvol50
              Set  the vol control volume to 50. If the pcm control is a stereo control, than both channels will
              be set to 50.

       ossmixvol50:60
              Set the vol control so that the left channel volume is 50 and the right channel volume is 60.

       ossmixvol+2
              Raise vol volume by 2.

       ossmix--vol+2:-2
              Raise the left channel volume by 2, and lower right channel volume by 2.  The "--"  is  needed  on
              some systems so that the "-2" won't be mistaken for a parameter.

       ossmixmicboostON
              Set micboost to ON.

       ossmixmicboostTOGGLE
              Toggle micboost.

       ossmixmplayer+2
              Raise mplayer volume by 2. This would only work if mplayer is using the virtual mixer.

/usr/bin/ossmix

ossmix - Open Sound System command-line mixer program.

-D     Display device information.

       -a     Dump mixer settings for all mixers (normal format).

       -c     Dump mixer settings for all mixers (command format).

       -h     Display usage information.

       -q     Quiet mode.

       -v[1|2]
              Verbose mode. -v2 prints more detailed information than -v1.

       ctrl#value
              Change value of a mixer control.

       <noarg>
              Display current/possible settings.

ossdevlinks(1), ossxmix(1), savemixer(1)

       It's  possible  to  select  the  mixer  device  by  using the -d<mixernumber> command line argument. This
       argument (when used) should be the first one on the command line. By default the mixer number 0  will  be
       accessed.   To  find  the  available mixer devices, type ossinfo -x and look under the Mixers heading for
       available mixer devices.

ossmix [-d <dev#>] [-achqD] [controlname] [value]

ossmix  without  any  arguments  displays  the  current settings of the default mixer device (usually the
       motherboard sound chip). This printout can also be used to find out the supported control names and their
       possible values. Currently all controls accept an ON/OFF value, a mono value (0 to 100) or a stereo value
       (left:right where both channel volumes can be between 0 and 100). The value can also be  expressed  in  a
       relative  form  (e.g.  +1  to  add 1 to the previous volume). An ON/OFF control can also receive a TOGGLE
       value. If a control has a name in quotes following the normal output, than the name can be  used  instead
       of the control when setting a value.

       The following is a sample printout produced by ossmix:

               Selected mixer 0/Creative AudioPCI
               Known controls are:
               vol <both/leftvol>[:<rightvol>] (currently 50:50)
               pcm <both/leftvol>[:<rightvol>] (currently 50:50)
               speaker <monovol> (currently 21)
               line <both/leftvol>[:<rightvol>] (currently 32:32)
               line.rec ON|OFF (currently OFF)
               mic <monovol> (currently 16)
               mic.rec ON|OFF (currently ON)
               cd <both/leftvol>[:<rightvol>] (currently 100:100)
               cd.rec ON|OFF (currently OFF)
               pcm2 <both/leftvol>[:<rightvol>] (currently 75:75)
               line1 <both/leftvol>[:<rightvol>] (currently 32:32)
               line1.rec ON|OFF (currently OFF)
               line2 <monovol> (currently 32)
               line2.rec ON|OFF (currently OFF)
               line3 <monovol> (currently 0)
               line3.rec ON|OFF (currently OFF)
               mic.micboost ON|OFF (currently ON)
               mic.micbias ON|OFF (currently ON)
               mute.pcmmute ON|OFF (currently OFF)
               mute.pcm2mute ON|OFF (currently OFF)
               mute.micmute ON|OFF (currently OFF)
               mute.cdmute ON|OFF (currently OFF)
               mute.linemute ON|OFF (currently OFF)
               mute.line1mute ON|OFF (currently OFF)
               mute.line2mute ON|OFF (currently OFF)
               mute.line3mute ON|OFF (currently OFF)