s51, savr, sz80 - 8051, AVR and Z80 microcontrollers simulator for SDCC.

       This manual page was written by Aurelien Jarno <aurel32@debian.org>, for the Debian GNU/Linux system (but
       may be used by others).

                                                                                                        UCSIM(1)

       ucSim is distributed under the GNU General Public License.

ucSim is a microcontroller simulator. It is extensible to support different microcontroller families.

       MCS51 family is simulated bys51.
       AVR family is simulated by savr.
       Z80 processor is simulated by sz80.

       Specified files must be names of Intel hex files. Simulator loads them in specified order into the ROM of
       the simulated system.

       s51, savr, sz80 - 8051, AVR and Z80 microcontrollers simulator for SDCC.

-tCPU Type  of  CPU.  Recognized types are: 51, 8051, 8751, C51, 80C51, 87C51, 31, 8031, C31, 80C31, 52,
              8052, 8752, C52, 80C52, 87C52, 32, 8032, C32, 80C32, 51R, 51RA, 51RB, 51RC,  C51R,  C51RA,  C51RB,
              C51RC,  89C51R,  251,  C251, DS390, DS390F. Note that recongition of a CPU type as option does not
              mean that the simulator can simulate that kind of CPU. Default type is C51. DS390 supports  Dallas
              DS80C390 dual-dptr operations, DS390F supports minimal flat24 mode code and dual-dptr operations.

       -Xfreq[k|M]
              XTAL frequency is freq Hertz.  k or M can be used to specify frequency in kHZ or MHz. Space is not
              allowed between the number and the k or M. Default value is 11059200 Hz.

       -cfile
              Open  command console on file. Command consoles are on standard input and output by default. Using
              this option the console can be opened on any file for example  on  the  serial  interface  of  the
              computer.

       -Zportnum
              Listen  for  incoming  connections  on  port  portnum.  Using this option uCsim can serve multiple
              consoles. You can get a console by simply telnet into machine  running  uCsimto  port  portnumber.
              This option is not available on platforms which doesn't support BSD networking.

       -sfile
              Connect  serial interface of the simulated microcontroller to the file. Nothing is used by default
              which means that characters transmitted by serial interface of the simulated microcontroller go to
              nowhere and it will never receive anything. If you are going to communicate with serial  interface
              interactively the best idea is to specify a teminal with -s option.

       -Sin=file,out=file
              Using  this option you can specify different files for input and output streams that uCsim uses to
              simulate microprocessor's serial interface.

       -pprompt
              Using this option you can specify any string to be the prompt of command interpreter, for example:
              $ s51 -p "s51> "
              ucsim 0.2.12, Copyright (C) 1997 Daniel Drotos, Talker Bt.
              ucsim comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
              This is free software, and you are welcome to redistribute it
              under certain conditions; type `show c' for details.
              s51>

       -P     Prompt will be a null ('\0') character. This feature can be useful  for  programs  which  controls
              simulator through a pipe.

       -V     Verbose  mode.  The  simulator  notifies  you  about  some  kind  of  internal actions for example
              interrupts. Messages are printed on command console.

       -v     Print out version number and stop.

       -H     Print out types of known CPUs. Names printed out by this option can be used to determine CPU  type
              using -t option.

       -h     Print out a short help about the options and stop.

sdcc(1), s51(1), savr(1), sz80(1).

s51[options]filenamessavr[options]filenamessz80[options]filenames

       The information in this man page is an extract from the full documentation of SDCC, and is limited to the
       meaning of the options.

       For complete and current documentation, refer to the ucSimsimulatorUserGuide.