nvme-ocp-clear-fw-activate-history - Clear the OCP Firmware Update History Log

       For the NVMe device given, Clear OCP Firmware Update History Log.

       The <device> parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0) or block
       device (ex: /dev/nvme0n1).

       This command with no option added, will try to automatically detect the parameters of the command. This
       will work successfully or fail gracefully for devices supporting UUID for Vendor Specific Information
       (NVMe 1.4 or later, OCP 2.0 requires NVMe 1.4b). For devices that do not support OCP 2.0 the command will
       fail gracefully, unless the --no-uuid option is provided.

       For OCP 1.0 devices (before NVMe 1.4) the --no-uuid option is required. When --no-uuid option is
       provided, results for devices before NVMe 1.4 without OCP support are undefined.

       On success it returns 0, error code otherwise.

       •   Clears OCP Firmware Activation History Log for the device:

               # nvme ocp clear-fw-activate-history /dev/nvme0

       nvme-ocp-clear-fw-activate-history - Clear the OCP Firmware Update History Log

       Part of the nvme-user suite.

NVMe                                               02/16/2025                               NVME-OCP-CLEAR-FW(1)

       -n, --no-uuid
           Do not try to automatically detect UUID index for this command (required for old OCP 1.0 support)

nvmeocpclear-fw-activate-history <device> [--no-uuid | -n]